null

MADE IN THE USA

phone: (805) 584-8635

Questions? CALL US 805-584-8635

648 of 706 Items
  • Sale
    GenRight dash V-bar for the Jeep JK & JKU roll cages How the dash v bar looks after being installed. V-bar lines up with overhead tubes Front view shows how the dash V-bar ties into the upper tube Here you can see how all the cage "nodes" tie together for optimal strength

    GenRight

    Jeep JK Dash V-Bar Add on for V1 GenRight Cages

    This Jeep JK Dash V-Bar Add on is meant for use with the V1 GenRight Roll Cage for 2 and 4 Door Jeep JK's. The V-Bar is an important connection between the dash cross bar and the upper cage cross bar, to add additional strength and rigidity. Used in...

    Was: $99.99
    Now: $49.99
    Add to Cart
  • TJ/LJ C-Pillar Tie-In Builders Kit parts, hardware included, but not pictured. Here is how it attaches to the cage and to the frame. Looking up at the attachment point under the rear fender well. How it mounts to the top of the box at the rear most body mount.

    GenRight

    C-Pillar Roll Cage Tie In Kit for Jeep TJ & LJ

      This is the GenRight Off Road kit to tie-in the C-Pillar of your Roll Cage down to the top of the rear body mount (directly above the frame mount) for added support and safety in the event of a roll over. This is the same kit we have...

    $149.99
    Add to Cart
  • GenRight Aluminum Dash Panel Mount - Blank GenRight Aluminum Dash Panel Mount - Blank

    GenRight

    GenRight Aluminum Dash Panel Mount - Blank

    This GenRight Off Road manufactured "radio plate" plate fits where the factory radio goes in a TJ or LJ. The panel comes blank, so you can cut or drill any holes you want for switches, outlets, radios, or other accessories you have...

    $34.99
    Add to Cart
  • JP27833 Rubber gasket for the Jeep Wrangler YJ fuel pump module

    GenRight

    YJ Fuel Pump Module Gasket

    This is a replacement rubber gasket for the factory Jeep YJ Fuel Pump module / sending unit. Fit all GenRight Jeep YJ & CJ tanks. It also fits the stock '87-'95 Jeep Wrangler YJ's with 6 cylinder plastic gas tanks. p/n: JP27833

    $24.99
    Add to Cart
  • Simple behind the seat tank for the YJ or CJ-7 from GenRight Dimensions of the BST-4000 tank and mounting flange Gas Cap on the BST-4000 fuel tank with spill dam around it Optional fuel pump blank plate, gasket or CJ pick up adapter for the BST-4000 How the optional CJ pick up adapter works

    GenRight

    Universal Tank (23 Gal)

      This is a high quality universal tank to fit behind the back seat in the cargo area of a Jeep YJ or CJ-7. This tank can be used as a primary tank (or a 2nd tank). Because it is not mounted under the tub, the rear axle can be moved back up...

    $899.99
    Add to Cart
  • Gas Tank Adapter Plate for the Jeep LJ Unlimited Adapter welded to the forward factory cross member that holds gas tank Here you can see how short a TJ Skid plate is from the front cross member mount Looking from the rear, the adapter is mounted on the forward cross member Installed with a Currie 70 rear axle

    GenRight

    Gas Tank Adapter Plate, Jeep LJ

    This is the adapter plate necessary to slide the stock Jeep gas tank or GenRight 25 gallon tank back on a Jeep Unlimited LJ by removing the "foe" rear cross member. This will only work on the Jeep LJ Unlimited. This will work with any...

    $99.99
    Add to Cart
  • Sale
    GenRight's Front LED Side Marker Light Kit Here you can see how the mounting brackets let the light hide under the tube fender.

    GenRight

    LED Stealth Side Marker Light Kit, 2 light

    This is the hard to find super bright amber colored LED's. It can be used as a front blinker or running light. This is the same LED light we chose to be part of our Stealth Side Marker Light kit.GenRight has packaged this Stealth 2...

    $40.00
    Add to Cart
  • LED Back Up Light (Pair) We used 4 of these in the rear bumper on the GenRight Growler YJ. Here is a good view of the rear bumper plate on the GenRight Bowtie TJ.

    GenRight

    LED Back Up Light (Pair)

      This makes a great Back Up or Rock Light! These clear (or white) LED lights are nearly flush and a clean design! These lights will fit GenRight Jeep Rear Bumpers. This is also great option if you are removing you are...

    $29.99
    Add to Cart
  • This is a Non-electric line lock, parking brake, emergency brake We offer two different mounting styles for your application A mounting style for this line lock, parking brake B mounting style for this line lock, parking brake Technical specifications for mounting this hydraulic ball valve

    GenRight

    Ball Valve Parking Brake

      This is a simple (non-electric) hydraulic ball valve assembly that can be used as an inline parking brake. How does it work? You simply step on the brake pedal and turn the lever. It then locks the pressure in the brake line (as if you...

    $179.99 - $189.99
    Choose Options
  • GenRight BST-2100 "Behind the Seat" tank for Jeep TJ, LJ or JK Diagram of the BST-2100 with dimensions Close up view of gas cap and "dam" to prevent damage or spillage Optional metal cover to protect the fuel pump

    GenRight

    Universal 20 Gallon Fuel Cell

    Finally a tank specifically designed for hard core Jeeps that are no longer driven on the highway. By using this model tank it opens the entire under body area for radical rear axle relocation. It is intended to be mounted behind the driver and...

    $759.99 - $949.99
    Choose Options
  • X-bar tube kit for the GenRight Jeep JKU roll cages. The factory seats fit into the X-bar shape perfectly Rear leg room is only decreased by the diameter of the tubes The JKU cage with X-bar option looks awesome when painted to match! Rear seats still fold down

    GenRight

    Jeep JKU Behind the Seat X-Bar for GenRight Cages (V2)

    OPTION Behind the Seat X-Bar for our 4 door GenRight Jeep JKU Cage (V2) The X-Bar kit is a highly recommended addition to all our Jeep roll cages, as it adds lateral strength to the cage in the event of a roll over. Therefore, providing the best...

    $349.99
    Add to Cart
  • Jeep Gladiator (JT) Rear Tube Fenders - Aluminum Front view - Jeep JT Aluminum Rear Tube Fenders Jeep Gladiator (JT) Rear Tube Fenders powder coated & shown w/40" tire Good tire coverage w/40" tire on Jeep Gladiator (JT) Rear GenRight fenders Jeep Gladiator (JT) Rear Tube Fenders powder coated white

    GenRight

    Jeep Gladiator (JT) Rear Tube Fenders - Aluminum

      These entirely new Rear Tube Fenders for the Jeep Gladiator (JT) are more narrow than the factory plastic flare (width), making them hug the curved body of the all new Jeep Gladiator. These tube fenders are perfect for more clearance when...

    $999.99
    Add to Cart
  • Sale
    X-bar tube kit for the GenRight Jeep JKU roll cages. The factory seats fit into the X-bar shape perfectly Rear leg room is only decreased by the diameter of the tubes The JKU cage with X-bar option looks awesome when painted to match! Rear seats still fold down

    GenRight

    Jeep JKU Behind the Seat X-Bar for GenRight Cages (V1)

    This is the GenRight Behind the Seat X-Bar for our 4 door GenRight Jeep JKU Cage (GRC-8001), aka V1. The X-Bar kit is a highly recommended addition to all our Jeep roll cages, as it adds lateral strength to the cage in the event of a roll over...

    Was: $349.99
    Now: $99.99
    Add to Cart
  • GenRight Corner Guard Hardware Kit

    GenRight

    GenRight Corner Guard Hardware Kit

    This is a universal Replacement hardware kit for any model GenRight corner guards. It includes 5/16-18 stainless steel flat head allen bolts, washers and nuts (as pictured). It even includes a rivnut installation tool, hinge spacers, tabs to tie into...

    $69.99
    Add to Cart
  • Threaded Step Bungs (Each) - Multiple Sizes 7/8-14 Weld in bung on a 1-3/8" x .188" wall tubing for steering tie rod and/or drag link. 1-1/4-12 Weld in bung on a 1-3/4" x .120" or 2" x .250" wall tubing) for a control arm with a flex joint or heim. 1/2-20 Weld in bung on the end of (1" x .120" wall tubing) for a sway bar link.

    GenRight

    Threaded Step Race Bungs (Each) - Multiple Sizes

    These are top quality DIY weld-in "Tube Inserts" or "Bungs" (aka; threaded insert). They are CNC machined from cold rolled (1020) steel can be MIG or TIG welded into the end of your Steering, Sway Bar, Trac Bar or Control Arm tubing. The hex head on...

    $9.99 - $21.98
    Choose Options
  • ARP-1001 GenRight Fuel Pump ring (and nut) for a 2005 - 2018 Jeep pump module

    GenRight

    Fuel Pump Ring, 2005 - 2018 TJ / LJ / JK

    This is the fuel pump adapter ring for any 2005 - Current factory type fuel pump modules on the Jeep TJ, LJ, and JK. The GenRight Crawler™ Series Fuel Pump Tank rings are great for adapting your factory pump to other aftermarket tanks...

    $349.99
    Add to Cart
  • GenRight's billet aluminum fairlead Haus for synthetic winch lines Billet aluminum fairlead Haus for use with synthetic winch lines GenRight's billet aluminum fairlead for synthetic winch lines

    GenRight

    GR Aluminum Winch Fairlead

    This is the GenRight Aluminum Winch Fairlead to be used with synthetic winch lines, just like we use on all the GenRight Jeeps.FEATURES  Made from 3/4" thick Aluminum alloy  CNC Machined   Recessed (flush with front...

    $99.99
    Add to Cart
  • GenRight Pump Ring Tool Tool shown here with factory plastic Jeep pump ring APR-1000 Fuel pump ring, takes the plastic pump ring

    GenRight

    Pump Ring Tool , 1997 - 2004 TJ / XJ

    This is the tool you need to properly remove or install the factory Jeep plastic ring on a TJ, LJ or XJ fuel tank. Used on all TJ, LJ & XJ's 97-04. This simple tool is laser cut from 6061-T6 Aluminum alloy. Prevents damage to the plastic fuel pump...

    $299.99
    $19.99
    Add to Cart
  • Jeep JK 4" Flare Rear Tube Fenders - Aluminum Jeep JL 4" Flare Rear Tube Fenders (Rear View) Jeep JL 4" Flare Rear Tube Fenders (Front View)

    GenRight

    Jeep JL 4" Flare Rear Tube Fenders - Aluminum

      These are the 4" Aluminum REAR Tube Fenders (aka Fender Flares) from GenRight Off Road for the all new 2018 and newer Jeep Wrangler JL. These close fitting tube fenders are perfect for rock crawling through the Boulders or Trees...

    $899.99
    Choose Options
  • APR-1000 Fuel pump ring, TJ

    GenRight

    Fuel Pump Ring, 1997 - 2004 TJ / XJ

    This is the fuel pump adapter ring for any 97-04 factory type fuel pump modules on Jeep TJ or XJ. The GenRight Crawler™ Series Fuel Pump Tank rings are great for adapting your factory pump to other aftermarket tanks (metal or plastic)...

    $299.99
    Add to Cart
  • Sale
    Filler piece from Aluminum roof to windshield on a TJ, LJ, YJ, CJ with GenRight cage See filler piece here between roof AND windshield See filler piece here between roof AND windshield

    GenRight

    Filler Piece for TJ / LJ / YJ / CJ-7 Aluminum Roof

    This is the "filler" piece that fits between the windshield and the GenRight aluminum roof for the GenRight TJ, LJ, YJ or CJ Roll Cage(s). It is constructed from 6061-T6 Aluminum, it attaches with the same 4 bolts that hold down the front of the roof...

    $99.99
    Add to Cart
  • Universal Spare Tire & Wheel Mount. The urethane isolator holds a variety of wheel sizes. Here you can see how it clamps the wheel into place.

    GenRight

    Universal Spare Tire & Wheel Mount

    This is a top quality universal spare tire mounting assembly from GenRight Off Road. It has a heavy duty 1" ACME threaded rod and giant T-handle nut are perfect to hold a spare tire in an off-road vehicle. The mounting bracket has (6) 1/4-20 Grade 8...

    $349.99
    Add to Cart
  • Steering, misalignment spacers

    GenRight

    Hi-Misalignment spacer (Pair) 3/4 to 5/8

    This is a hi-misalignment spacer for a Heim joint. This part number reduces the bore from 3/4" to 5/8" diameter to fit in our Drag Link Correction Kit. This is the exact same part we run on the drag link (in a LH & RH) of all the GenRight...

    $24.99
    Add to Cart
  • Steering, misalignment, spacers

    GenRight

    Hi-Misalignment spacer (Pair) 1" to 9/16"

    This is a hi-misalignment spacer for the big "16" size Heim joint. This part number reduces the bore from 1" to 9/16" diameter to fit in our suspension brackets. This is the necessary part to adapt the big FK heim to fit in...

    $24.99
    Add to Cart
  • Steering, misalignment, spacers

    GenRight

    Hi-Misalignment spacer (Pair) 1" to 5/8"

    This is a hi-misalignment spacer for the big "16" size Heim joint. This part number reduces the bore from 1" to 5/8" diameter to fit in our suspension brackets. This is the necessary part to adapt the big FK heim to fit in...

    $24.99
    Add to Cart
  • Aluminum Gas Cap and Filler Kit (Jeep YJ/CJ Pictured) Typical install on a stretched TJ, YJ ot CJ Still easy to access for filling, but recessed so it does not hit the tire Aluminum Gas Cap and Filler Kit (Jeep TJ/LJ '97-'02 Pictured) Kunrled cap for grip, sealed with a premium o-ring to keep dirt out

    GenRight

    Aluminum Gas Cap & Filler Kit w/ Vent

      This is the GenRight Billet Aluminum Gas Cap & Filler assembly. It's compact design solves a problem for stretched Jeeps with big tires! It is mounted above the frame inside the rear inner fender well (as pictured). The entire...

    $299.99
    Choose Options
  • JK Elite rear bump can mounts Here you can see the bump cans welded into place on the rear shock towers. Here is what it looks like when finished.

    GenRight

    JK Elite Rear Bump Can Kit (Pair), 4 door

     This is the GenRight rear bump stop kit for the Rear JK Elite Suspension System. These Bump Stops "cans" fit in a KING 2.0" diameter air bump can. FEATURES: A must for running coil over shocks. Designed to "key" into the GenRight JK Rear...

    $299.99
    Add to Cart
  • Corner Guard Backing Plates for any GenRight Corners Shown here on the inside of an LJ tub to reinforce the side Corner Guard Backing Plate Shown here installed

    GenRight

    Corner Guard Backing Plates

    This is the CNR-7000, Corner Guard Backing Plates (pair) by GenRight Off Road. These are used to reinforce the top AND side mounting area of the Corner Guard on your Jeep. Simply put them on the inside of the tub, in place of the fender washers. They...

    $69.99
    Add to Cart
  • JK Elite front bump can mounts Here you can see the front bump can welded in place next to the shock tower

    GenRight

    JK Elite Front Bump Can Kit (Pair), 2 and 4 door

     This is the GenRight Front Bump Stop kit for the front JK Elite Suspension System. It is a simple and low cost solution for bump stops on a Jeep! Here is how it works: These Urethane Bump Stops fit in a KING 2.0" diameter air bump...

    $299.99
    Add to Cart
  • Universal Bolt in Spare Tire & Wheel Mount Universal Spare Tire & Wheel Mount Installed in the back of a UTV.

    GenRight

    Universal Bolt in Spare Tire & Wheel Mount

    This is a heavy duty Universal Bolt on Spare Tire & Wheel Mount from GenRight Off Road. Build from 3/16" cold rolled steel plate it is strong. It has a T-handle on a large acme thread that allows you to quickly load and unload a spare tire/wheel...

    $449.99
    Add to Cart
  • Latch Pin for Tire Carrier

    GenRight

    Latch Pin for Tire Carrier

    This is a replacement "latch pin" for any GenRight Off Road "Swing Down" or "Swing Out" rear tire carrier.This is a replacement 1/2" diameter pin.Sold EACH.Self locking feature, T-handle style (as pictured). Replacement Urethane bushings are...

    $14.99
    Add to Cart
648 of 706 Items

© 2025 GenRight Offroad All rights reserved. | Sitemap