Jeep TJ Laser Notched Full Roll Cage Kit

This is the newest Laser Cut and Puzzled Cage Kit for your Jeep Wrangler TJ (1997 - 2006) from GenRight Off Road.

It is the most protective, complete replacement weld-in cage available on the market.

Precision Fit - Laser Cut and notched tubes are CNC Mandrel Bent (the best way) and puzzle together for a "jigless" kit that is easy to assembly in your Jeep. Each tube has the part number etched on it so you can follow the step-by-step assembly diagram.

Unrivaled Functionality - Maximum visibility thanks to an ultra low profile dash bar and works with your factory hard top and soft tops and doors.

Safety First - The 1-3/4" DOM tubing and solid Six-Point mounting provides unmatched safety.

All the tubes are cut to length and notched to fit together like a "puzzle" you just need a welder to put it all together.

Features:

• Maximum visibility - Designed with super low-profile dash bar.
• Works with factory hard (optional factory soft top adapter kit is available).
• Can be used with hard (full or half) doors or soft doors.
• Protection for rear seat passengers too.
• Made from .120" thick wall 1 3/4" D.O.M. (Drawn Over Mandrel) seamless tubing.
• All the tubes are CNC Mandrel Bent and Laser Cut with keys for a precision, puzzle like assembly.
  
• Laser Cut and CNC formed 3/16" thick cage to tub mounting brackets.
• Does not require cutting the dash.
• Kit can be shipped to you by FedEx in three boxes.
• The tubes can be fitted without a jig and tacked in place so you can weld it together.
• 6 point mounting to the vehicle (includes plates to tie A-pillars into the rockers too).
• Includes 2 grab handles, as pictured.
• Optional re-enforcement bars are available (at the dash and behind the seats) and recommended for maximum protection.
• Includes bracket mounting kit to accept all the factory seat belts.
• Includes detailed step by step installation instructions.
  
  

Notes:

• This kit is sold un-welded and welding is required by the end user.
• It is always best to build the roll cage in the Jeep it will be used in.
• This KIT requires complete removal of the stock roll bar (and most of the interior).
• Both factory seat belts and 5-point harnessed can be used.
• After welding the cage, it is possible to remove the entire roll cage for powder coating.
• Factory soft top requires a optional adapter kit to re-mount the factory door surrounds.
• See Cage Options when checking out.
• Due to the grab handle placement on the A-pillar, the corner of the sun visors will need to be trimmed to swing properly.
• If there is any chance you want an aluminum roof, it is MUCH more economical for shipping to order it with the cage.

Optional Accessories:

• Cage to Frame Tie-in Kit
• C-Pillar Roll Cage Tie In Kit for Jeep TJ
• Behind Seat Bar, C Pillar
• 1/8" Thick Aluminum Roof
• Dash V-bar
• Behind the Seat X Bar
• Harness Bar