null

Made in the USA Since 2006

phone: (805) 584-8635

Universal & DIY

universaldiy.jpg

Our Universal & DIY components are all Trail Tested & Race Proven components that we have assembled into packages that allow you the freedom to suit your own needs.

Our 3-Link and 4-Link kits have optimized geometry that reduces rear steer and implements optimal anti-squat properties, with completely bind-free travel and articulation. The kits also allow you to stretch your wheelbase if you choose.

We also offer builders parts, gussets, shock mount kits, and more. Whatever it is, we have you covered.

72 of 174 Items
  • GenRight's Short Rear Shock Towers, RSM-1000 Shown here is an outboard shock tower with remote res Raise up the entire shock and move it outboard for better dampening control Another mounting solution with this rear shock tower

    GenRight

    Universal Outboard Rear Shock Tower Kit, Short

    This is a SHORTER and thinner version of our RSM-1001 outboard rear shock towers for the Jeep Wrangler TJ, Jeep LJ, Jeep YJ or CJ-7. It is designed to accept 2.0" shocks. It is a perfect way to convert your rig to outboard mounted...

    $249.99
    Add to Cart
  • GenRight's Outboard Rear Shock Mount Kit Close up of JIG welded lower shock mounts, included in this kit. TJ/LJ/YJ/CJ Universal Outboard Rear Shock Mount Kit (Shocks not included) Lower shock mount installs on the back side of the rear axle tube. Outboard Rear Shock Mount Kit Mid-Install (Bump Cans not Included)

    GenRight

    Universal Outboard Rear Shock Mount Kit

    The GenRight outboard rear shock mount kit for the Jeep TJ, LJ, YJ or CJ-7 was designed to accept 2.0" coil over shocks. It is a perfect way to convert your rig to Coilover shocks! The clean and simple design which "frenches"...

    $349.99
    Add to Cart
  • High Clearance Lower Rear Shock Mount Kit

    GenRight

    High Clearance Lower Rear Shock Mount Kit

    This is the lower rear shock mount (axle side) kit. Similar to our outboard rear shock mount kit, but this is only the lower mounts.This is perfect for someone who already has our kit but is changing axles and who does not want to cut off the...

    $124.99
    Add to Cart
  • SSV MRB3 Bluetooth System Controller w/Screen & 4 Channel Amp SSV MRB3 Display / Controller is fully sealed and has a back lit LED screen Shown Installed in a Jeep Wrangler TJ using the GenRight aluminum radio plate Shown Installed in a Jeep Wrangler TJ on a black GenRight radio plate The LCD display is compact.

    SSV Works

    SSV MRB3 Bluetooth Media Controller w/ Screen

    Looking for a weather & dust proof solution for your Jeep? Well so were we and this is Tony's favorite! This is a surface mounted display that replaces the traditional "stereo head unit" in your Jeep's dash and is connected via Bluetooth...

    MSRP: $299.99
    Was: $299.99
    Now: $229.99
    Choose Options
  • GenRight aluminum foot rest Foot rest parts GenRight's aluminum foot rest Aluminum foot rest Aluminum foot rest for passenger

    GenRight

    Universal Aluminum Foot Rest

    This is the GenRight Off Road aluminum foot rest. These are great for a passenger to push themselves back in the seat in rough terrain. It is universal and can be used in any off-road vehicle where the passenger wants a foot rest...

    $99.99
    Add to Cart
  • Billet Aluminum Dash Grab Handle Billet Aluminum Dash Grab Handle Billet Aluminum Dash Grab Handle

    GenRight

    Billet Aluminum Dash Grab Handle

    This is the GenRight Off Road aluminum grab handle. Fits with the GenRight Aluminum Dash or the factory Jeep dash. FEATURES: CNC machined billet aluminum Black Anodized Includes new mounting hardware. 100% Made in USA...

    $199.99
    Add to Cart
  • Transmission mount for 2007 to 2011 Automatic Here is a view of the Transmission mount for '07 - '11 on the front cross member.

    GenRight

    JK Transmission Mount, '07-'11

    This is a "Universal" Automatic Transmission Mount for the GenRight JK Elite Suspension System, it is designed to fit the 2007 - 2011 Jeep JK. It comes longer than needed to accept several different transmissions. It is used to hold up your...

    $149.99
    Add to Cart
  • Automatic Transmission mount for 2012 and Up on the front cross member

    GenRight

    JK Transmission Mount, '12 - '17

    This is a Automatic Transmission Mount for the GenRight JK Elite Suspension System for a 2012 to Present Jeep JK. It is used to hold up your transmission (and transfer case), independent of your vehicle's belly skid plate. We have designed this to be...

    $219.99
    Add to Cart
  • GenRight Off Road's Universal Transmission Crossmember Kit Stock belly skid plate and trans mount in an '06 LJ Rubicon with a 6 speed manual. GenRight BKT-1050 in '06 LJ Rubicon with the 6 speed manual. GenRight BKT-1050 cross member and SKP-2500 belly skid on '06 LJ Rubicon w/6 speed manual. 2 cross member kits were used to hold the transmission and the ASR-390 Atlas T-case support

    GenRight

    Universal Transmission Crossmember Kit

    This is a DIY (do-it-yourself) Universal Cross Member Kit to hold up your transmission (or transfer case). We have designed this kit to be compatible with a wide variety of engine and transmission configurations used in off road Jeeps. The cross...

    $249.99
    Add to Cart
  • This is how the kit comes, un-assembled This is what the kit looks like after welding GenRight Front 3 Link frame mounting brackets GenRight Front 3 Link frame mounting brackets This is how the frame side 3 link brackets lay out

    GenRight

    3 Link Front Bracket Kit, Chassis side (Unwelded)

    This is what the public has been asking for! A low cost DIY "builders kit" of our popular 3 link Front suspension brackets (not welded). We have figured out all the mounting points for proper geometry (bump steer, anti-squat, etc.) to make your rig a...

    $149.99
    Add to Cart
  • Rear 4-Link Rear Bracket Kit (Chassis Side) 3 Hole, Fully Welded 4 Link Rear Bracket Kit, 3 Hole installed Rear 4-Link Rear Bracket Kit (Chassis Side) 3 Hole

    GenRight

    Rear 4-Link Rear Bracket Kit (Chassis Side) 3 Hole

    This is our original 3 hole version of the "builders" Triangulated 4 link rear suspension bracket kit. We have figured out all the mounting points for proper geometry (weight transfer, rear steer and minimal anti-squat, etc.) to make your rig...

    $449.99
    Add to Cart
  • The 3 Link upper link mount can put on either side by the installer GenRight Front 3 Link frame mounting brackets GenRight Front 3 Link frame mounting brackets This is how the frame side 3 link brackets lay out Drivers side tacked into position on a Jeep TJ frame

    GenRight

    3 Link Front Bracket Kit

    This is the GenRight 3 link Front Bracket Kit for a Jeep Wrangler TJ, LJ or YJ (but can be made to fit the CJ-7 too).Front 3 Link Kit FEATURES: Single upper control arm (to the top of the axle) allows the installer more flexibility to locate the...

    $349.99
    Add to Cart
  • 3 Link Front & 4 Link Rear Bracket Package

    GenRight

    3 Link Front & 4 Link Rear Bracket Package

      This is a "builders" PACKAGE with a 3 Link front and 4 Link rear suspension bracket kit(s).   This is your chance to get extra $$$ OFF our normal good deal!Designed to fit a TJ or YJ (but can modified to fit a CJ), this is...

    $799.99
    Add to Cart
  • GenRight's Axle Side 0 degree Lower Control Arm Brackets, BKT-3100 Shown here "tacked" into place in the proper rotation on the axle One piece design allows for more weld surface on the axle tube

    GenRight

    0 Deg Lower Control Arm Brackets

    These are top quality 0 Degree lower control arm mounting brackets from GenRight Off Road. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly. Unlike the old days where fabricators just welded individual tabs...

    $69.99
    Add to Cart
  • BKT-3110 lower control arm 10 degree brackets from GenRight Off Road Shown here a the rear axle tube One piece design allows for more weld surface on the axle tube

    GenRight

    10 Deg Lower Control Arm Brackets

    These are top quality 10 Degree lower control arm mounting brackets from GenRight Off Road. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly. Unlike the old days where fabricators just welded individual tabs...

    $69.99
    Add to Cart
  • GenRight's axle side 30 Degree lower control arm brackets Welded to the axle tube for this double triangulated rear set up Our one piece design allows for more weld surface on the axle tube

    GenRight

    30 Deg Lower Control Arm Brackets

    These are top quality 20 Degree lower control arm mounting brackets from GenRight Off Road. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly. Unlike the old days where fabricators just welded individual tabs...

    $69.99
    Add to Cart
  • GenRight's Axle Side 20 degree Lower Control Arm Mount One piece design allows for more weld surface to the axle tube

    GenRight

    20 Deg Lower Control Arm Brackets

    These are top quality 20 Degree lower control arm mounting brackets from GenRight Off Road. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly. Unlike the old days where fabricators just welded individual tabs...

    $69.99
    Add to Cart
  • 3" Upper Control Arm Mount (Axle Side), BKT-3240 Shown here welded to the top of a rear axle bridge (limit strap tab optional)

    GenRight

    3" Upper Control Arm Mount (Axle Side)

    This is the GenRight 3" tall Universal Control Arm Mounting Bracket. It is designed to be welded on the Axle Side and can be modified to fit any upper control arm vehicle application. The mount is universal and can be cut or trimmed to be...

    $44.99
    Add to Cart
72 of 174 Items

© 2022 GenRight Offroad All rights reserved. | Sitemap