null

MADE IN THE USA

phone: (805) 584-8635

Questions? CALL US 805-584-8635

Jeep TJ 97-'06

GenRight engineers and builds world-class, rock-solid, ultra-tough off-roading components for Jeep Wranglers.  

 

We've been supporting Jeep Wrangler TJ since first opening our doors ten years ago and continue to offer the industry's most comprehensive lineup of serious off-roading accessories for TJ owners. 

 

These are not chain store parts and components.  Every GenRight product is developed to be a vast improvement over stock and well ahead of the competition.  We don't just drive Jeep Wranglers, we drive them hard, everywhere, all the time.  We also successfully race in Ultra4 and King of the Hammers, the toughest off-roading challenges since humanity landed on the moon.

 

GenRight also takes customer service very seriously. If you have a question, give us a call at (805) 584-8635, and we will be happy to assist you.

216 of 343 Items
  • VisionX Flood Light

    Vision X

    VisionX LED Flood Light, Rectangular

    This is the VisionX LED Flood Light, rectangular shape. It is great for vehicles, campers, trailers or anywhere you need a low profile flood light. Easy to mount with single bolt (as pictured).Light FEATURES: (32) Wide Angle LED bulbs. 500...

    $108.99
    Add to Cart
  • VPP1001 - GenRight Vented Power Steering Pulley The GenRight Underdrive pulley spinning and pushing air over the pump GenRight Vented Power Steering Pulley - Red GenRight Vented Power Steering Pulley - Blue

    GenRight

    Vented Power Steering Pulley

      This is not just eye candy... Big tires and tough trails will make your power steering pump work hard and get incredibly hot! Hot fluid will dramatically shorten the life of the fluid and the pump. GenRight's vented power steering pulley has...

    $199.99
    Choose Options
  • Universal Urethane Bump Stop (Pair) w/ Bump Cans Same length as a compressed air bump stop, so you can upgrade down the road Shown here on the rear suspension with coil over shock Shown here on the front suspension set up for a coil over shock

    GenRight

    Universal Urethane Bump Stop (Pair) w/ Bump Cans

      This is the GenRight "Rock Stomper" Urethane bump stops. It is a simple and low cost solution for bump stops on a Jeep! Here is how it works: These Urethane Bump Stops fit in a KING 2.0" diameter air bump can. This allows you to...

    $299.99
    Choose Options
  • GenRight Off Road's Universal Transmission Crossmember Kit Side view of the GenRight cross member holding trans and t-case in a Jeep build. Close up of the Urethane mount & tabs on each side of this universal cross member kit. Weld the tabs to the inside of the frame so there is clearance for your exhaust. GenRight BKT-1050 in '06 LJ Rubicon with the 6 speed manual.

    GenRight

    Universal Transmission Crossmember Kit

      This is a DIY (do-it-yourself) Universal Cross Member Kit to hold up your transmission (or transfer case). We have designed this kit to be compatible with a wide variety of engine and transmission configurations used in off road Jeeps. The...

    $249.99
    Add to Cart
  • Simple behind the seat tank for the YJ or CJ-7 from GenRight Dimensions of the BST-4000 tank and mounting flange Gas Cap on the BST-4000 fuel tank with spill dam around it Optional fuel pump blank plate, gasket or CJ pick up adapter for the BST-4000 How the optional CJ pick up adapter works

    GenRight

    Universal Tank (23 Gal)

      This is a high quality universal tank to fit behind the back seat in the cargo area of a Jeep YJ or CJ-7. This tank can be used as a primary tank (or a 2nd tank). Because it is not mounted under the tub, the rear axle can be moved back up...

    $899.99
    Add to Cart
  • Twisted Pitman Arm Removal Tool, STK-2520 Tool threads into the internal threads cut into the pitman arm Tool being threaded into the pitman arm for removal from the steering box Be sure to cap off the internal threads from dirt and moisture!

    GenRight

    Twisted Pitman Arm Removal Tool

    This is the Removal Tool (or pitman arm puller) for all the GenRight Twisted Pitman Arms.FEATURES include: CNC machined from tool steel. Hex on the tool is same size (1-5/16") as nut holding the pitman arm on the steering box sector...

    $79.99
    Add to Cart
  • GenRight Twisted Pitman Arm for the Jeep TJ, LJ, YJ Arm is twisted for optimal geometry and range of motion GenRight Twisted Pitman Arm GenRight Twisted Pitman Arm has it's own threaded section for the removal tool Shown here mounted on a Jeep TJ steering box

    GenRight

    GenRight Twisted Pitman Arm

    This is the innovative Twisted Pitman Arm from GenRight Off Road! This will correct the angle issues inherent in hi-steer set ups (on long travel suspension systems using heims). How? We twisted (or rotated) the drag link mounting...

    $399.99
    Add to Cart
  • Twisted pitman arm and the twisted mount for the hi-steer arm. Closeup of the mount on a hi-steer arm Here you can see how both are twisted to improve range of motion Includes a plastic cap to protect the internal threads on the pitman arm

    GenRight

    Twisted Pitman & Hi-Steer Mount

      This is the GenRight Twisted Pitman Arm and Hi-Steer Arm Mount for drag links with heims on both ends. It includes our Twisted Pitman Arm and our Hi-Steer Arm Mount kit to correct the angle issues inherent in long travel front...

    $499.99
    Add to Cart
  • Dual Phantom In-Tank Pump system from Aeromotive Assembly ready to go into the gas tank Close up on the internals on the Aeromotive dual 340 Phantom pump Close up of the top of the Aeromotive pump Close up of pump installed in GenRight tank with optional adapter

    Aeromotive

    Aeromotive Phantom Dual 340 Fuel Pump & Baffle System

    This is the Aeromotive brand Dual Phantom 340 Stealth Fuel System. This is the same fuel pump system we run on the GenRight Terremoto JKU. It is an in-tank type module which includes a foam baffle and reservoir also know as a "sump" (see pictures)...

    $947.95
    Add to Cart
  • TJ/LJ 4" Flare Front Tube Fenders - Steel TJ/LJ 4" Flare Front Tube Fenders - Steel TJ/LJ 4" Flare Front Tube Fenders - Steel TJ/LJ 4" Flare Front Tube Fenders - Steel

    GenRight

    TJ/LJ 4" Flare Front Tube Fenders - Steel

    This is the newest version (G3) Tube Front Fender from GenRight Off Road, with a 4" flare for a Jeep Wrangler TJ or LJ (1997 - 2006). We have incorporated a new removable side panel into the side of this new fender that not only makes it look unique...

    $799.99
    Choose Options
  • 1.5" - 2" Tubing Couplers (Sold Each)

    GenRight

    1.5" - 2" Tubing Couplers (Each)

    This is a Tube Coupler. They are designed to be strong and perfect for use in situations where you need a removable tube. Simply weld (MIG or TIG) each side into the tube you want to remove. These couplers are meant for use with .120 wall tubing (1.5",...

    $49.99 - $54.99
    Choose Options
  • GenRight's Jeep TJ Frame Side Trac bar mount kit. Inside of GenRight's Jeep TJ Frame Side Trac bar mount pieces assembled for picture. GenRight's TJ / LJ Frame Side Trac bar mount pieces as supplied in the kit. GenRight's TJ Frame Side Trac bar mount kit tacked in place on the frame. TJ Frame side trac bar mount kit, fully welded and painted with Twisted pitman arm.

    GenRight

    TJ/LJ Trac Bar Mount (Frame Side)

    This is the GenRight Frame side Trac Bar Mounting Bracket Kit for the Jeep Wrangler TJ or LJ (1997 - 2006). This is the same design we have reliably run on our GenRight Jeeps for years, including on Jordan's 4500 Class KOH racer!Front...

    $99.99
    Add to Cart
  • GenRight Axle Side Trac Bar Mount Comes with 3/4" Grade 8 Bolt, Washers, and Uni-Torque Nut Here you can see how trac bar and drag link are parallel. Installed Trac Bar mount

    GenRight

    Universal HD Trac Bar Mount, (Axle Side)

    This is the GenRight Axle Side Trac Bar Mounting Bracket for a front 3 link kit. We have sold and installed 1000's of suspension kits and over time we have made several revisions and upgrades to the component parts. This is the...

    $99.99
    Add to Cart
  • Rocker Guard (rock slider) Backing Plates RCG5500 This is how they look after being installed and rhino lined. Here you can see how they are drilled and formed.

    GenRight

    TJ/YJ/CJ/LJ Rocker Guard Backing Plates

    This is a great upgrade for any of the GenRight rocker guards (aka: rock sliders). These backing plates are laser cut and formed from 3/16" thick steel for strength. It is similar to adding a big fender washer, but larger and stronger to pull more of...

    $39.99
    Add to Cart
  • Sale
    GenRight Mini Boat Side Rockers with side bar (steps). The Mini Boat Side Rockers is what Tony ran on the Growler GR Mini Boat Side Rockers are shown here installed. Mini Boat Side Rockers allow for 1.5" more ground clearance The same Rockers Jordan used on his 4500 class car

    GenRight

    Mini Boat Side Rocker Guards w/Bars, TJ/YJ/CJ

      These are the newest rockers available from GR for Jeeps! GenRight Off Road has designed a "Mini Boat Side" Rocker Guards offer over 1" more ground clearance than a conventional rocker guard (rock slider) right at the outside corner where...

    Was: $900.00
    Now: $799.99
    Choose Options
  • Sale
    GenRight's Standard Wheelbase Rocker Guards for the Jeep TJ, YJ, & CJ-7 Dimple Die step provides dependable traction Here you can see how cleanly they mount on the Jeep Slider bar is angled to increase clearance. This is a close up of the entry step (with dimple die grippers) on the GenRight rockers

    GenRight

    TJ/YJ/CJ Rocker Guards w/Bars (Standard Wheelbase)

      This is the GenRight rocker protection for the Jeep Wrangler TJ (1997 - 2006). Designed for the TJ, but can be trimmed to fit the Jeep wrangler YJ & CJ-7. These are the same 3/16" thick rocker guards we have used on all our GenRight Jeeps...

    Was: $800.00
    Now: $699.99
    Choose Options
  • Parts kit to adapt factory seat belts to a GenRight roll cage.

    GenRight

    TJ Factory Seat Belt Mounting Kit

      This is the GenRight Off Road kit to adapt the factory seat belts to the GenRight Full Roll cage for the Jeep TJ or LJ.FEATURES: Designed to fit the GenRight GRC-2001 or 6001 cage(s) for the Jeep TJ or LJ. Laser cut and...

    $149.99
    Add to Cart
  • GST-2003 GenRight Jeep TJ or LJ gas tank and skid plate Enduro Pictured is a GenRight gas tank with skid plate installed on a 2002 TJ Basic dimensions for the GST-2003 GenRight Jeep TJ or LJ gas tank and skid plate Reference dimensions to see if it will fit your build

    GenRight

    Jeep TJ/LJ (24.5 Gal) Gas Tank & Skid Plate

    Now you can explore with confidence! It is specifically designed as a heavy duty replacement for the factory Jeep fuel tank. The GenRight Crawler™ Enduro Gas Tank will fit right into any Jeep Wrangler TJ or LJ (1997-2006) with the rear...

    $1,699.99 - $1,899.99
    Choose Options
  • TJ Corner Guard Set (Stretch) - Aluminum Shown here with GenRight's EXT flare. GenRight's CNR-2013 shown here with no flare

    GenRight

    TJ Corner Guard Set (Stretch) - Aluminum

      This is the GenRight Off Road "Full" ALUMINUM STRETCH Corner Guard set for the Jeep Wrangler TJ. These are a perfect upgrade to better protect your Jeep’s tub AND not add much extra weight! This model is an ideal choice for...

    $699.99
    Choose Options
  • TJ Corner Guard Set (Stretch) - Steel

    GenRight

    TJ Corner Guard Set (Stretch) - Steel

      This is the GenRight Off Road "Full" STRETCH Corner Guard set for the Jeep TJ. These are a perfect upgrade to better protect your Jeep’s tub. This model is an ideal choice when stretching your rear axle back to keep the wheel...

    $699.99
    Choose Options
  • CNR-2012 - GenRight Standard Corner Guards - Aluminum Jeep TJ Polished corner guards with factory TJ flares mounted back on and 37's Side view of polished corner guard with factory TJ rear flare and 37" tires Aluminum corners that have been trimmed for bigger tires, no flares on the trail Painted aluminum corner guards on standard wheelbase TJ with factory flares

    GenRight

    TJ Corner Guard Set (Standard) - Aluminum

      This is the GenRight Off Road "Full" ALUMINUM Corner Guard set for the Jeep Wrangler TJ. These are a direct bolt-on and a perfect upgrade to better protect your Jeep’s tub and not adding much extra weight! This model is an ideal...

    $649.99
    Choose Options
  • CNR-2002 Jeep TJ Corner Guards with standard wheel opening, Steel Shown here painted with flush mount LED tail lights & factory plastic rear flare reinstalled.

    GenRight

    TJ Corner Guard Set (Standard) - Steel

     This is the GenRight Off Road "Full" Corner Guard set for the Jeep TJ. These are a direct bolt-on and a perfect upgrade to better protect your Jeep’s tub. This model is an ideal choice for anyone wanting to "Armor Up" their trail...

    $649.99
    Choose Options
  • FBB-2000 Jeep Wrangler TJ or LJ stubby front winch bumper

    GenRight

    TJ/LJ Stubby Front Bumper - Steel

    This is the GenRight Off Road heavy duty Stubby front bumper with for Jeep Wrangler TJ & LJ (Unlimited). This is our high quality, high clearance Stubby front bumper. It is perfect for your favorite trail as it will not get...

    $449.99
    Add to Cart
  • GenRight's Jeep TJ Winch Guard Front Bumper in Steel TJ Winch Guard Front Bumper in Steel, powder coated & installed Jeep TJ Winch Guard Front Bumper in Steel, powder coated & installed

    GenRight

    TJ/LJ Winch Guard Front Bumper - Steel

    This is the GenRight Off Road heavy duty Stubby front bumper with Winch Guard Bar for Jeep Wrangler TJ & LJ (Unlimited).This is our most popular Stubby front bumper with our 1-3/4” tube front winch guard bar welded...

    $799.99
    Add to Cart
  • TJ/LJ Boulder Stinger Front Bumper - Steel

    GenRight

    TJ/LJ Boulder Stinger Front Bumper - Steel

      This is the GenRight Off Road heavy duty front winch bumper with Boulder Series Stinger Only for Jeep Wrangler TJ & LJ (Unlimited).This is our high quality, high clearance Stubby front bumper with our 1-3/4”...

    $799.99
    Add to Cart
  • GenRight's Jeep TJ/LJ Winch Guard Front Bumper - Aluminum T/LJ Winch Guard Front Bumper - Aluminum (Installed)

    GenRight

    TJ/LJ Winch Guard Front Bumper - Aluminum

    This is the GenRight Off Road Aluminum Stubby front bumper with Trail series winch guard bar on it for the Jeep Wrangler TJ & LJ (Unlimited). This is our super lightweight, high quality, high clearance front bumper. It is perfect for your...

    $949.99
    Add to Cart
  • TJ/LJ Stubby Front Bumper, Aluminum FBB-2040 TJ/LJ Stubby Front Bumper - Aluminum Close up of aluminum stubby front bumper on a Jeep TJ GenRight aluminum stubby front bumper on a Jeep TJ Aluminum stubby bumper pictured here painted black.

    GenRight

    TJ/LJ Stubby Front Bumper - Aluminum

    This is the GenRight Off Road Aluminum Stubby Front Bumper with for Jeep Wrangler TJ & LJ (Unlimited). This is our super lightweight, high quality, high clearance front bumper. It is perfect for your favorite trail as it will not get caught on any...

    $549.99
    Add to Cart
  • GenRight Off Road's Stanchion kit for the '97 - 06 Jeep Wrangler TJ or LJ. Here you can see how the stanchion fits when installed. Here you can see the stanchions on a fully welded cage out of the vehicle.

    GenRight

    TJ / LJ Cage Stanchions

      PRICE REDUCTION! Building your own cage?Then the GenRight Stanchion or Leg at the dash for the Jeep TJ / LJ is for you. They are designed to fit tight to the dash and maximize leg room.It is laser cut from heavy 3/16" thick steel plate and CNC...

    $399.99
    Add to Cart
  • This handy bag was made for either swing out or down GenRight tire carrier. Shown here mounted on tire carrier upper hoop with HD velcro. We were able to store the essential trail recovery gear in our PRP tire carrier bag. We tested in harsh conditions.

    GenRight

    Tire Carrier Gear Bag

    This is the GenRight Rear Tire Carrier Gear Bag Tony uses on his Jeep. It is made for us by PRP and is perfect for keeping recovery gear handy out on the trail. We use it to store tow straps, trail gloves, D-ring shackles and...

    $99.99
    Add to Cart
  • GenRight's TALL Tub Panel Guards TJ/LJ Tall Tub Panel Guards - Aluminum

    GenRight

    TJ/LJ Tall Tub Panel Guards - Aluminum

    Protect the side of your TJ (or LJ's) tub with a set of the GenRights "TALL" Tub Panel Guards. This Aluminum Tub Panel Guard is mounted directly to the tub body panel with special hardware provided with each set of guards. The Tub Panel Guards mount...

    $249.99
    Add to Cart
  • GenRight Off Road Rear Sway Bar Kit for the Jeep TJ, LJ or YJ Jeep Rear Sway with coil over shock at full droop. Here you can see frame mount for rear sway bar with (white) bearing. Here you can see the axle side mounting and how link fits.

    GenRight

    TJ/LJ/YJ Sway Bar Kit - Rear

      This is the GenRight rear sway bar kit to fit a Jeep TJ, LJ or YJ. This kit was designed to add stability to your lifted or long travel Jeep. It is a weld-on kit. Our sway bar is about 30% stiffer than other brand Anit-Rock type...

    $999.99
    Add to Cart
  • RTC3590 RTC3590 Open (Locked) Position RTC3590 Closed Position

    GenRight

    Stop-Lock for TJ Swing Out Rear Tire Carrier

      This is the "Stop / Lock" for the GenRight Swing Out rear tire carrier that fits the Jeep TJ / LJ (1997 - 2006).It allows the tire carrier to be opened all the way and locked into position automatically so the rear cargo area can...

    $149.99
    Add to Cart
216 of 343 Items

© 2025 GenRight Offroad All rights reserved. | Sitemap