null

MADE IN THE USA

phone: (805) 584-8635

Questions? CALL US 805-584-8635

Jeep TJ 97-'06

GenRight engineers and builds world-class, rock-solid, ultra-tough off-roading components for Jeep Wranglers.  

 

We've been supporting Jeep Wrangler TJ since first opening our doors ten years ago and continue to offer the industry's most comprehensive lineup of serious off-roading accessories for TJ owners. 

 

These are not chain store parts and components.  Every GenRight product is developed to be a vast improvement over stock and well ahead of the competition.  We don't just drive Jeep Wranglers, we drive them hard, everywhere, all the time.  We also successfully race in Ultra4 and King of the Hammers, the toughest off-roading challenges since humanity landed on the moon.

 

GenRight also takes customer service very seriously. If you have a question, give us a call at (805) 584-8635, and we will be happy to assist you.

288 of 343 Items
  • LED Back Up Light (Pair) We used 4 of these in the rear bumper on the GenRight Growler YJ. Here is a good view of the rear bumper plate on the GenRight Bowtie TJ.

    GenRight

    LED Back Up Light (Pair)

      This makes a great Back Up or Rock Light! These clear (or white) LED lights are nearly flush and a clean design! These lights will fit GenRight Jeep Rear Bumpers. This is also great option if you are removing you are...

    $29.99
    Add to Cart
  • Sale
    3/4" LED Side Marker Lights The LED side marker light cleanly mounts inside the inner fender on a Jeep JK Cleanly mounted LED side marker lights on a Jeep JK When mounted they are nearly flush They fit right in the holes on our front fenders

    GenRight

    LED 3/4" Round Marker Light, Amber

    This is a top quality super bright amber colored LED. It is perfect for being used as a front blinker or running light. This is the same LED light we chose to be part of our Stealth Side Marker Light kit. FEATURES: Designed to fit...

    $29.99
    Add to Cart
  • Latch Pin for Tire Carrier

    GenRight

    Latch Pin for Tire Carrier

    This is a replacement "latch pin" for any GenRight Off Road "Swing Down" or "Swing Out" rear tire carrier. This is a replacement 1/2" diameter pin.Sold EACH.Self locking feature, T-handle style (as pictured). Replacement Urethane bushings are...

    $14.99
    Add to Cart
  • KING 2.5" Shocks, w/Clicker RES, TJ Front 0"-2" Lift

    King Shocks

    KING 2.5" Shocks, w/Clicker RES, TJ Front 0"-2" Lift

      This is the 2.5" King Shock with remote reservoir and compression adjusting knob for the Jeep TJ FRONT with a 0 - 2" lift.   King’s new line of Original equipment manufacturer, (OEM), shock upgrade kits provide a bolt on suspension...

    $1,299.99
    Add to Cart
  • KING 2.0" Emulsion Coilover Shock An o-ring on the cap keeps dust and dirt from contaminating the valve Tapered spring cup for more clearance during articulation Single allen pinch bolt to release the preload collar. Shown here on the front of a Jeep Wrangler.

    King Shocks

    KING 2.0" (14" Stroke) Emulsion Coilover Shocks

      This is the KING Brand of 2.0" diameter Coil Over Shock, without remote reservoir. These are the best and most quiet coil over shocks you can buy. KING Shocks have a great name in the off-road world. They build an extremely high...

    $634.99
    Add to Cart
  • King 2.0" Air Bump with Can King 2" air bump on the GenRight Elite Suspension Shown here next to a Jeep TJ frame with King 2.0 can frenched into it. Shown here with GenRight shock mount and frame plate after frenching in can Shown here on the GenRight Growler YJ

    King Shocks

    King Shocks 2.0" Air Bump w/ Can

      This is the King Shocks Brand of 2.0" diameter Air Bump (Sold Each). These are the best air bumps money can buy. This is the same air bump we used on our GenRight Growler Jeep to pre-run for 8 weeks at the Hammers for the 2010 King of the...

    $379.99
    Add to Cart
  • Genuine Rock Jock (Currie) Johnny Joint CE-9114 with 1-1/4"-12 shank How it works: special compound urethane, sintered metal ball, washers and clip Johnny Joints on both ends of GenRight 7075 aluminum control arms Johnny used on an upper control arm of a suspension Johnny Joints on double triangulated rear suspension

    RockJock

    Johnny Joint, 1-1/4 Shank by Rock Jock

    This is a genuine 2-1/2" Rock Jock Johnny Joint (by John Currie) with a 1-1/4-12 threaded shank for suspension control arms. A Johnny Joint is a suspension end designed to smoothly rotate up to 30 degrees without binding (or degrading...

    $66.00
    Choose Options
  • Cross member backing plate, RBB-1007

    GenRight

    Inner Reinforcement Plates, TJ / YJ

      This is the Inner Plate to reinforce the inside of the rear cross member and picks up the middle 6 bolts to beef up the rear cross member. This plate is also 3/16" thick steel, just like the rear bumper plate (RBB-1000). It is designed to...

    $59.99
    Add to Cart
  • Front and back of YJ aluminum inner fenders YJ inner fender kit Shown here with standard height YJ tube fenders

    GenRight

    Jeep YJ Standard Aluminum Inner Fender Kit

      This is the new Inner Fender Well Kit from GenRight Off Road, for a Jeep YJ, that eliminates the need to cut the stock fender! It is constructed of lightweight Aluminum alloy and is primarily designed to work with our newest G3 series...

    $349.99
    Add to Cart
  • TJ/LJ Standard Inner Fender Kit Shown here with standard height GenRight tube fenders and coil over shocks Shown here with standard height GenRight tube fenders and coil springs

    GenRight

    TJ/LJ Standard Inner Fender Kit

      This is the Inner Fender Well Kit from GenRight Off Road, for a Jeep TJ or LJ that eliminates the need to cut the stock fender at all! This is a REAL inner fender. It will fully enclose the area (unlike other aftermarket inner fenders)...

    $349.99
    Add to Cart
  • Mesh panel helps let heat out of engine compartment Hi Fenders and Hi Inner fenders, shown here on the GenRight Tuxedo LJ Jeep Wrangler TJ (or LJ) Hi-Fender Inner Fender Kit, aluminum TJ/LJ Hi-Fender Inner Fender Kit shown with GenRight hi-fenders with stock coil springs

    GenRight

    TJ/LJ Hi-Fender Inner Fender Kit

    This is the Hi-Fender Inner Fender Well Kit from GenRight Off Road, for a Jeep Wrangler TJ or LJ. Updated in 2022 with a mesh panel to vent heat from the engine compartment. By using these inner fenders, it eliminates the need to cut the stock...

    $349.99
    Add to Cart
  • GenRight's 5 piece hood louver set Louvers placement on the hood 5 piece hood vent kit on a Red Jeep Step 1 - tape the mounting surface Step 2 - trace the shape and measure 1/2" in all the way around

    GenRight

    Hood Louver Set, 5pc - Black

    This is the GenRight Off Road 5 piece hood louver set for a Jeep TJ/LJ or YJ in black. This configuration offers maximum cooling for your engine compartment! The louvers can be mounted in many different positions on the hood and (this part number) is...

    $179.99
    Add to Cart
  • Hood Louver Set, 3pc Short - Black Tony ran the 3 piece louver set on his Growler YJ with a V8 Hood Louver Set, 3pc Short - Black Installed

    GenRight

    Hood Louver Set, 3pc Short - Black

    This is the Gen-Right Off Road 3pc "short" hood louver set.Works great on Jeep TJ, LJ or YJ. They can be mounted in many different positions on the hood and are sold as a 3 piece set.This 3pc kit is: (1) Front louver and (2) short back louvers with...

    $99.99
    Add to Cart
  • GenRight 3 piece long hood louver set in black Proper hood placement How the underside of the hood looks after mounting Installed on a Jeep Liberty

    GenRight

    Hood Louver Set, 3pc Long - Black

      This is the GenRight Off Road 3pc "long" hood louver set.Works great on Jeep TJ, LJ or YJ.They can be mounted in many different positions on the hood and are sold as a 3 piece set.This 3pc kit is: (1) Front louver has louvers in traditional...

    $99.99
    Add to Cart
  • Hood Louver Set, 2pc Short - Black

    GenRight

    Hood Louver Set, 2pc Short - Black

    This is the Gen-Right Off Road 2 pc "short" hood louver set for any Jeep or other vehicle with a relativly flat hood.These are intended to be mounted in the rear position on the hood and are sold as a 2 piece set.This 2pc kit is: 2 short louvers,...

    $89.99
    Add to Cart
  • GenRight's Hood Louver set Here is the typical mounting position for the 2 piece long hood louvers Typical mounting position for the 2 piece long hood louvers

    GenRight

    Hood Louver Set, 2pc Long - Black

    This is the GenRight Off Road 2 piece "long" hood louver set in black. This is a great way to vent that unwanted engine compartment heat and look good too! These louvers can be mounted in many different positions on the hood. Sold as a 2 piece set...

    $89.99
    Add to Cart
  • Hood Louver Long Front Only Hood Louver Long Front Only

    GenRight

    Hood Louver Long Front Only - Black

    This is the GenRight Off Road "long" FRONT hood louver set in BLACK powder coated finish.Works great on a Jeep TJ, LJ or YJ.This configuration offers great cooling for your engine compartment!The louver can be mounted on front portion of the...

    $59.99
    Add to Cart
  • GenRight's Hi Lift Jack Mounts Here you can see customer mounted the jack to the outside Another view of the clamps holding the jack onto the tube

    GenRight

    Hi Lift Jack Tube Mounts, 1-3/4"

      This a pair of tube clamps with a threaded 3/8" stud. Primarily used to mount a Hi-Lift jack on the tubes of our Jeep rear tire carriers, front bumper or roll cages. This a super clean way to mount accessories on any 1-3/4"...

    $109.99
    Add to Cart
  • GenRight's Hi Lift Jack mounts for any 1-1/2" dia tube The 1-1/2" dia tube clamps mount a Hi Lift jack to the GenRight tire carrier

    GenRight

    Hi Lift Jack Tube Mounts, 1-1/2"

    This a pair of tube clamps with a threaded stud. Primarily used to mount a Hi-Lift jack on one of our Jeep rear tire carriers, but can be used on any 1-1/2" diameter tube. The clamps are precision machined with two recessed...

    $99.99
    Add to Cart
  • Universal GenRight Trac Bar with Currie Johnny Joint on one end and Heim on the other Shown here mounted using the GenRight frame side bracket and a Gr8 9/16" bolt

    GenRight

    Heavy Duty Trac Bar, Only

      This is the Heavy Duty GenRight Front Trac Bar ONLY (mounting brackets sold separately).This product is still considered part of our "builders" product line, since it requires the end user to properly cut it to size and weld in the...

    $549.99
    Add to Cart
  • Jeep TJ/LJ Heavy Duty Trac Bar Kit Axle Side of the TJ Trac Bar Bracket Shown here is how the backside of the bracket boxes in around the frame too. Shown here with Twisted pitman arm and mounted on the side of the TJ frame. Laser cut plates show how the mount box around the Jeep TJ frame.

    GenRight

    Jeep TJ & LJ Heavy Duty Trac Bar Kit

    This is the Heavy Duty GenRight Front Trac Bar Kit to keep the front axle under your Jeep. The materials used are twice as thick as stock! This builders kit comes with the Johnny Joint pre-welded on one side and the tubing...

    $649.99
    Add to Cart
  • The GenRight Cage Harness Bar Kit includes aluminum side plates (as pictured) Pictured is all the parts included in the harness bar kit. Weld the tabs into place and attach the side plates. How it looks installed

    GenRight

    Harness Bar Kit - TJ, LJ, YJ, CJ

    This is the GenRight B-pillar Harness Bar Kit for the GenRight Off Road TJ, LJ, YJ or CJ Full roll cage kits. It is designed to put the shoulder harness mounting points in the proper position for the driver and passenger (front 2 seats or...

    $299.99
    Add to Cart
  • Teraflex Hand Throttle Kit Contents This is the typical hand throttle installation on gear shift Hand Throttle for stick shift Jeeps Hand Throttle mounted in a Jeep Wrangler YJ Closer look at mounting for the hand throttle

    Teraflex

    Hand Throttle

    This is a Hand Throttle. It is a simple lever that is mounted to the shifter of a manual transmission. It is the single best product any 4 wheeler with a stick shift (manual) transmission can buy!1) It allows the driver to apply the throttle with...

    $52.99
    Add to Cart
  • Large 3/16" Thick Corner Gusset (Pair)

    GenRight

    Large 3/16" Thick Corner Gusset (Pair)

    This is a "large" Corner Gusset from GenRight Off Road. They are Laser cut from Heavy Duty 3/16" thick plate steel. They are perfect for welding into corners where you need more support.Designed with a "relief" in the gusset to go over a...

    $14.99
    Add to Cart
  • 1/4" Thick Extra Long Gussets (Pair) Gussets shown here on either side of the GenRight rear shock tower Gussets shown here on either side of the GenRight rear shock tower RMS-5513-P Extra Long Gussets (Pair) are 1/4" thick Shown here on the GenRight Growler YJ

    GenRight

    1/4" Thick Extra Long Gusset (Pair)

    This is an optional (but highly recommended) gusset for each side of shock tower from GenRight Off Road. This is the same gusset used on every GenRight Jeep build. They are Laser cut from Heavy Duty 1/4" thick plate steel. They are perfect for...

    $19.99
    Add to Cart
  • Griffin Heavy Duty Jeep Radiator with fan, shroud and accessories, 1987 - 2006 Side view of the Griffin Heavy Duty Jeep Radiator 1987 - 2006 Front view of the Griffin Heavy Duty Jeep Radiator 1987 - 2006

    Griffin

    Griffin Jeep TJ/LJ/YJ Radiator w/Fan

      This is the top of the line a direct fit American made Griffin Aluminum Radiator for the Jeep Wrangler TJ / LJ / YJ. This is part of Griffin's new MaxCool package where they take out all the guess work and provide you everything you need to...

    $1,160.00
    Add to Cart
  • Large "two hand" grab handle Large handle is ideal when mounted in the center of the dash cross bar Here you can see Dash V bar and center mounted Handle on a YJ cage

    GenRight

    Roll Cage Grab Handle (Sold Individually)

    This is a "large" cage grab handle from GenRight Off Road. This is the same handle we weld into every GenRight roll cage. Universal design, is made from 7/8" diameter tubing. These handles can be welded to any cage on any model Jeep TJ, LJ, YJ or...

    $24.99
    Add to Cart
  • Sale
    TJ Full Roll Cage Kit Shown with optional Windshield V-Bar and C-Pillar Bar A breakdown of the components in the GenRight cage kit. GenRight cage installed with X-bar and seats TJ Full Roll Cage Kit Shown with no optional bars Here is how the laser cut tubes puzzle together

    GenRight

    Jeep TJ Laser Notched Full Roll Cage Kit

    This is the newest Laser Cut and Puzzled Cage Kit for your Jeep Wrangler TJ (1997 - 2006) from GenRight Off Road. It is the most protective, complete replacement weld-in cage available on the market. Precision Fit - Laser Cut and notched tubes are CNC...

    Was: $2,499.99
    Now: $2,249.99
    Choose Options
  • APR-1000 Fuel pump ring, TJ

    GenRight

    Fuel Pump Ring, 1997 - 2004 TJ / XJ

    This is the fuel pump adapter ring for any 97-04 factory type fuel pump modules on Jeep TJ or XJ. The GenRight Crawler™ Series Fuel Pump Tank rings are great for adapting your factory pump to other aftermarket tanks (metal or plastic)...

    $299.99
    Add to Cart
  • Factor 55 Flat Link in Red The flatlink is available in these colors Factor 55 FlatLink Pictured here on our Terremoto Jeep JK This is how a Factor 55 Flatlink is used Prolink and Flatlink side by side

    Factor 55

    Factor 55 Flat Link

    This is the Factor 55 Flatlink. It is machined from Billet 6061-T6 aluminum alloy and MADE IN USA. Eliminate the conventional winch hook and replace it with a safer and stronger FlatLink shackle thimble and D-ring.   The FlatLink shackle...

    $146.00
    Choose Options
  • 1/4" Thick Extra Large Corner Gusset (Pair)

    GenRight

    1/4" Thick Extra Large Corner Gusset (Pair)

    This is a Extra Large Corner Gusset from GenRight Off Road. It is Laser cut from Heavy Duty 1/4" thick plate steel.They are perfect for any area you want to reinforce or dress up. In a cage this type of gusset can serve as a functional way to hook...

    $19.99
    Add to Cart
  • SKP-2600 Engine Skid Builders Kit GenRight's Engine Skid kit protects the engine and transmission GenRight's Engine Skid kit installed on a Jeep Our engine skid is proven at KOJ by 4600 Class winners!

    GenRight

    Engine/Transmission Skid Plate Kit

      This is the GenRight Engine Skid Plate Kit for a Jeep. It is a universal kit, and was designed to work with our 3 Link front suspension (but might work with other kits). It is a tube frame with a 1/4" thick aluminum plate that is used to...

    $599.99
    Add to Cart
  • D-Ring Shackles (Pair)

    Teraflex

    D-Ring Shackles (Pair)

    This is a large D-Ring for attaching to a front or rear bumper tow point. 3/4" bolts size.Other FEATURES Include: Super Heavy Duty forged.  Silver CAD plated to prevent rust 3/4" bolt fits most bumpers on the market Sold in Pairs (2)...

    $45.99
    Add to Cart
  • GenRight STK-2503 Drag Link Correction Kit GenRight's Drag Link Correction Kit installed

    GenRight

    Drag Link Correction Kit

    This is the GenRight Drag Link Correction Kit with heims rod ends. This kit will correct the angles and issues inherent in long travel front suspensions (issue being; not enough down travel on the drag link heims when both pitman arm and...

    $799.99
    Add to Cart
  • GenRight's double triangulated rear cross member for a Jeep TJ Shown here being installed on a Jeep TJ Shown here with GenRight cross member kit and ASP-390 T-case support Shown here with GenRight BKT-1050 cross member kit and ASR-390 Extra plates reinforce the inside and bottom of the Jeep frame

    GenRight

    Double Triangulated 4 Link Crossmember Kit

    This is the GenRight Off Road design DOUBLE Triangulated 4 link cross member "only" kit for a Jeep TJ or YJ.Ideal to make your rig a top notch rock crawler with awesome articulation.We have figured out all the mounting points to optimize suspension...

    $799.99
    Add to Cart
288 of 343 Items

© 2025 GenRight Offroad All rights reserved. | Sitemap