null

MADE IN THE USA

phone: (805) 584-8635

Jeep TJ / LJ Legend Suspension System

untitled-1-copy.jpg

This is the GenRight "Legend" Coil Over Suspension Package for Jeep Wrangler TJ & LJ (1997-2006) this is the best, most balanced & adaptable suspension system on the market today!

This package is also good for a 5"-7" rear stretch and a 3" front stretch to get your Jeep to the perfect wheelbase. By the way, this is the same trail proven suspension set up we have run on many of our GenRight Jeeps for over 10 years!

This kit features optional 14" travel King coilover shocks and 1/4" thick wall lower control arms and brackets.

As you can see from the price this is no "bolt-on" kit! Unlike most kits, this kit is designed to provide smooth non-binding travel through the entire stroke of suspension travel (for crazy articulation). This kit package, replaces the entire Front and Rear suspension on your Jeep (TJ, LJ, YJ or CJ-7) with the best components money can buy!

17 of 17 Items
  • Currie Enterprises Rock Jock 70 Rear Axle Currie Enterprises Rock Jock 70 Rear Axles in stock Currie Rock Jock 70 Rear Axle in the GenRight Terremoto JK The Currie Rock Jock 70 being put to the test on Pritchett Canyon in Moab, UT. We run the Currie Rock Jock 70 in our 800HP Unlimited Class off-road race car

    Currie Ent

    Currie 70 Full Float Jeep Rear Axle - Complete

    This is the Currie Extreme 70 complete REAR Axle. This is the same axle we run in our 800HP Ultra4 racer, 640HP Terremoto Jeep Wrangler JK and Bowtie Jeep TJ since 2014! This is a complete Full Float, 40 spline rear axle with NO mounting brackets...

    $10,599.99
    Choose Options
  • Currie Enterprises Rock Jock 70 Front Axle Currie Enterprises Rock Jock 70 Front Axle 1480 U-joints and Hi-Steer Knuckles are standard on Currie front axles Currie 70 on a Jeep JK build Locking Hubs, over sized brakes and double shear high steer knuckles are standard

    Currie Ent

    Currie Extreme 70 Front Axle - Complete

    This is the race proven Currie Extreme 70 Front Axle. This is the same axle Tony has successfully run in our 805HP V8 powered 4400 Class racer for 7 years and his Terremoto JK!  This is a complete axle (but NO mounting brackets), so it's ready...

    $10,599.99
    Choose Options
  • Jeep Tj / LJ Legend Suspension Package (Base package pictured) Jeep Tj / LJ Legend Suspension Package (Base package pictured) Turn your Jeep Wrangler TJ into a stable and capable off road machine! Easy to see GenRight Legend kit coil over conversion on the Jeep Wrangler TJ frame. Rear setup with King Coilovers and Air Bumps

    GenRight

    Jeep TJ / LJ Legend Suspension Package

      This is the GenRight "Legend" Coil Over Suspension Package for Jeep Wrangler TJ & LJ (1997-2006) this is the best, most balanced & adaptable suspension system on the market since 2006! This package is also good for a 5"-7" rear...

  • Jeep TJ/LJ/YJ/CJ-7 Rear 4-Link Rear Kit Jeep on the trail with GenRight Off Road's Jeep TJ/LJ/YJ/CJ Rear 4-Link Rear Kit w/ Links Detail view of GenRight Off Road's Jeep TJ/LJ/YJ/CJ Rear 4-Link Rear Kit w/ Links

    GenRight

    Rear 4-Link Kit (Links Optional)

    Triangulated Rear 4-Link Kit for Jeep TJ, LJ, YJ & MoreBind-Free | Street Worthy | Trail Tested | Optimized Geometry | Customizable Have you been thinking about building your own kit from scratch, or just upgrading to improve the ride quality of...

    $1,499.99 - $2,499.99
    Choose Options
  • Jeep TJ/LJ/YJ/CJ-7 Front 3-Link Kit GenRight Front 3-Link w/ Links Installed on Jeep TJ GenRight Front 3-Link w/ Links Installed on BowTie GenRight Front 3-Link Suspension Kit (Skid Plate not Included)

    GenRight

    Front 3-Link Kit (Links Optional)

     Front 3-Link Kit for Jeep TJ, LJ, YJ & More Bind-Free | Street Worthy | Trail Tested | Optimized Geometry | Customizable This is the 3 Link kit from our Legend Suspension kit. It is called 3 link, but is technically a 4 link when you include...

    $1,599.99 - $2,349.99
    Choose Options
  • GenRight's Outboard Rear Shock Mount Kit Close up of JIG welded lower shock mounts, included in this kit. TJ/LJ/YJ/CJ Universal Outboard Rear Shock Mount Kit (Shocks not included) Lower shock mount installs on the back side of the rear axle tube. Outboard Rear Shock Mount Kit Mid-Install (Bump Cans not Included)

    GenRight

    Universal Outboard Rear Shock Mount Kit

    The GenRight outboard rear shock mount kit for the Jeep TJ, LJ, YJ or CJ-7 was designed to accept 2.0" coil over shocks. It is a perfect way to convert your rig to Coilover shocks! The clean and simple design which "frenches"...

    $399.99
    Add to Cart
  • King 2.0" Air Bump with Can King 2" air bump on the GenRight Elite Suspension Shown here next to a Jeep TJ frame with King 2.0 can frenched into it. Shown here with GenRight shock mount and frame plate after frenching in can Shown here on the GenRight Growler YJ

    King Shocks

    King Shocks 2.0" Air Bump w/ Can

      This is the King Shocks Brand of 2.0" diameter Air Bump (Sold Each). These are the best air bumps money can buy. This is the same air bump we used on our GenRight Growler Jeep to pre-run for 8 weeks at the Hammers for the 2010 King of the...

    $379.99
    Add to Cart
  • GenRight Off Road's Universal Transmission Crossmember Kit Side view of the GenRight cross member holding trans and t-case in a Jeep build. Close up of the Urethane mount & tabs on each side of this universal cross member kit. Weld the tabs to the inside of the frame so there is clearance for your exhaust. GenRight BKT-1050 in '06 LJ Rubicon with the 6 speed manual.

    GenRight

    Universal Transmission Crossmember Kit

    This is a DIY (do-it-yourself) Universal Cross Member Kit to hold up your transmission (or transfer case). We have designed this kit to be compatible with a wide variety of engine and transmission configurations used in off road Jeeps. The cross...

    $249.99
    Add to Cart
  • Jeep JK/TJ/LJ/YJ/CJ Rear Bump Stop Pad Kit SUP-1002 Rear Bump Stop Pad Kit (Assembled, Unwelded) Close up of the GenRight rear bump pad with 14" coil over shock Here you can see how the bump pads engage with the bump stops when flexed Another view on the bump pad mounted on rear axle

    GenRight

    Universal Rear Bump Stop Pad Kit

    This is the axle side, lower bump stop "pad" from GenRight Off Road. A simple and low cost solution for bump stops on your Jeep. Here is how it works: This kit can be installed with our Urethane Bump Stops or King/FOX Shocks 2.0" air bump,...

    $199.99
    Add to Cart
  • AGM Suspension Slider (Sold Each) Individual components shown Eliminates coil bind by allowing the upper and lower spring to rotate as they compress The AGM slider is made in 3 pieces. AGM Suspension Slider Sizes

    AGM

    AGM Suspension Sliders (Sold Each)

    This is the AGM "Slider", we use it on every GenRight vehicle. It is designed to replace the noisy plastic slider on a King or Fox coil over 2.0", 2.5" or 3.0" shock. The AGM Shock Slider is precision dual rate spring divider designed to keep the...

    $125.99 - $219.99
    Choose Options
  • Genuine Rock Jock (Currie) Johnny Joint CE-9114 with 1-1/4"-12 shank How it works: special compound urethane, sintered metal ball, washers and clip Johnny Joints on both ends of GenRight 7075 aluminum control arms Johnny used on an upper control arm of a suspension Johnny Joints on double triangulated rear suspension

    RockJock

    Johnny Joint, 1-1/4 Shank by Rock Jock

    This is a genuine Rock Jock Johnny Joint (by John Currie) with a 1-1/4-12 threaded shank for suspension control arms. A Johnny Joint is a suspension end designed to smoothly rotate up to 30 degrees without binding (or degrading which...

    $66.00
    Choose Options
  • GenRight Ram Mounting Tabs for Currie Axle and Hi-Steering Shaped to fit the Currie fabricated diff cover Perfect fit and location to our 1-3/8" diameter CrMo tie rod. Perfect fit and location on the Currie diff cover Here you can see how both hold the ram in the perfect location.

    GenRight

    Ram Mounting Tabs for Currie Axle

    This is a set of Ram Mounting tabs developed & made by GenRight Off Road. These are the same tabs we have used on all our builds like our Terremoto and the Growler Jeep Wranglers. One pair of tabs is made to fit the front diff cover of a Currie...

    $60.00
    Add to Cart
17 of 17 Items

© 2024 GenRight Offroad All rights reserved. | Sitemap