null

MADE IN THE USA

phone: (805) 584-8635

Axles

24 of 24 Items
  • Currie Enterprises Rock Jock 70 Rear Axle Currie Enterprises Rock Jock 70 Rear Axles in stock Currie Rock Jock 70 Rear Axle in the GenRight Terremoto JK The Currie Rock Jock 70 being put to the test on Pritchett Canyon in Moab, UT. We run the Currie Rock Jock 70 in our 800HP Unlimited Class off-road race car

    Currie Ent

    Currie 70 Full Float Jeep Rear Axle - Complete

    This is the Currie Extreme 70 complete REAR Axle. This is the same axle we run in our 800HP Ultra4 racer, 640HP Terremoto Jeep Wrangler JK and Bowtie Jeep TJ since 2014! This is a complete Full Float, 40 spline rear axle with NO mounting brackets...

    $10,599.99
    Choose Options
  • Currie Enterprises Rock Jock 70 Front Axle Currie Enterprises Rock Jock 70 Front Axle 1480 U-joints and Hi-Steer Knuckles are standard on Currie front axles Currie 70 on a Jeep JK build Locking Hubs, over sized brakes and double shear high steer knuckles are standard

    Currie Ent

    Currie Extreme 70 Front Axle - Complete

    This is the race proven Currie Extreme 70 Front Axle. This is the same axle Tony has successfully run in our 805HP V8 powered 4400 Class racer for 7 years and his Terremoto JK!  This is a complete axle (but NO mounting brackets), so it's ready...

    $10,599.99
    Choose Options
  • Complete Currie RockJock 44 Front Axle with brackets and tabs Complete Currie RockJock 44 Crate Front Axle Shown here with Black Currie diff cover, Reid knuckles and hi-steering Compare the stock JK 44 to the Currie RJ 44 Center section Compare the stock JK Dana 44 to the Currie RockJock 44 Center section

    Currie Ent

    Currie JK 44 Front Crate Axle - Complete

      The Currie 44 complete axle is a direct bolt-in solution for the Jeep Wrangler JK 2007 - 2018 off road jeep wranglers. The cost is reduced by retaining the stock outer knuckle assemblies (brakes, hubs etc.) and stock wheel bolt pattern (5...

    $6,399.99
    Add to Cart
  • RCV Axle Shafts for the Jeep JK Rubicon 44 GenRight JK build with GenRight Hi-steer and Elite suspension on Dana 44 Shown here on a GenRight build with GenRight Hi-steer and Elite suspension

    RCV Performance

    RCV Ultimate Dana 44 CV Axle Set for Jeep JK Rubicon '07+

      RCV Performance Ultimate CV Axles simply replace your Jeep JK's weak factory Dana 44 U-joint axle shafts with a high-strength constant velocity design. Tests prove Ultimate CV Axles to be twice as strong as OEM Jeep JK shafts, and they're just as...

    $1,449.99
    Add to Cart
  • Sale
    RCV Axle shafts for the Jeep JK Dana 30 front axle Shown here on a GenRight build with GenRight Hi-steer and Elite suspension GenRight JK build with GenRight Hi-steer and Elite suspension

    RCV Performance

    RCV Ultimate Dana 30 CV Axle Set for Jeep JK '07+

    RCV Performance Ultimate CV Axles simply replace your Jeep JK's weak Dana 30 U-joint axle shafts with a high-strength constant velocity design. Tests prove Ultimate CV Axles to be twice as strong as OEM Jeep JK shafts, and they're just as tough at a...

    $1,349.99
    Add to Cart
  • Curries Extreme version of the 1 Ton unit bearing with 5/8" wheel studs Shown here on the 640hp GenRight Terremoto Jeep JKU Close up of Extreme Duty Hub on Terremoto The Currie RJ VXR 60 Front Axle bearing put to the ultimate test in Jordan's KOH racer

    Currie Ent

    Currie EXTREME Unit Bearing Hub, 5/8" Studs

    This is the Currie Race proven, Extreme Unit Bearing Hub.   Machined for Heavy Duty 5/8" Studs. This is the same hub we run on our 4400 Unlimited Class racer, Peter Doolan's 4500 class racer and Tony's Jeep Teremoto JK. This Currie...

    $574.99
    Add to Cart
  • GenRight Elite Suspension Front upper link mount for Dynatrac XD60 front axle Fits into the JK with GenRight Elite kit like a glove!

    GenRight

    3 Link Bridge for Dynatrac Pro Rock XD60

    This is the GenRight Elite Suspension FRONT Bridge (upper link mount) for a Dynatrac Pro Rock XD 60. The mounts were designed as part of the GenRight Elite 3 Link front Suspension System. Requires differential housing to be machined, drilled and...

    $799.99
    $499.99
    Add to Cart
  • GenRight Elite Suspension Rear upper link mount for Dynatrac ProRock 80 rear axle GenRight's rear bridge on Pro Rock 80 rear axle

    GenRight

    4 Link Rear Bridge for Dynatrac Pro Rock 80

    This is the GenRight Elite Suspension REAR Bridge (upper link mount) for a Dynatrac Pro Rock 80. The mounts were designed as part of the GenRight Elite 4 Link rear Suspension System. Requires differential housing to be machined, drilled and...

    $799.99
    $499.99
    Add to Cart
  • Drivers Side Currie 1 Ton Knuckle (Left). Drivers Side Currie 1 Ton Knuckle (Left) on axle housing with optional hi-steer arm.

    Currie Ent

    Currie 1 Ton Knuckle, Drivers Side

    This is Currie modified 1 Ton Knuckle DRIVERS side. Machined for the Currie Hi-Steer arm (CE-60-10001L). Designed to work with the GenRight JK Elite, Tracer or Legend Suspension Systems. Fits all Currie Rock Jock 60 or 70 front axle purchased...

    $479.99
    Add to Cart
  • Drivers Side Currie 1 Ton Knuckle (Right). Drivers Side Currie 1 Ton Knuckle (Right) on axle housing with optional hi-steer arm.

    Currie Ent

    Currie 1 Ton Knuckle, Passenger Side

    This is Currie modified 1 Ton Knuckle for the PASSANGER side (or Right side) of a front axle. Machined for the Currie Hi-Steer arm (CE-60-10001R). Designed to work with the GenRight JK Elite, Tracer or Legend Suspension Systems. Fits all Currie...

    $479.99
    Add to Cart
  • Currie Full Float Rear Axle Hub, 5 on 5.5 and 1/2" studs Includes new bearing races.

    Currie Ent

    Currie Full Float Rear Hub 5 on 5.5 with 1/2" Studs

    This is Currie Full Float Rear Axle Hub. Fits either drivers or passenger sides. 5 on 5.5" Bolt Pattern. 1/2" Diameter Wheel Studs. Designed to work with the GenRight JK Elite, Tracer or Legend Suspension Systems. Fits all Currie Rock Jock 60...

    $474.99
    Add to Cart
  • Currie Full Float Rear Axle Hub, 5 on 5.5 and 5/8" studs Includes new bearing races.

    Currie Ent

    Currie Full Float Rear Hub 5 on 5.5 with 5/8" Studs

    This is Currie Full Float Rear Axle Hub. 5 on 5.5" Bolt Pattern. 5/8" diameter Wheel Studs. Fits either drivers or passenger sides. Designed to work with the GenRight JK Elite, Tracer or Legend Suspension Systems. Fits all Currie Rock Jock 60...

    $474.99
    Add to Cart
  • Heavy Duty Currie Fabricated Diff Cover Hardware, fill plug and gasket are included. Currie Fabricated Diff Cover for 60 or 70 axles.

    Currie Ent

    Currie Fabricated Diff Cover 60 or 70

    This is the Currie Heavy Duty Fabricated Differential Cover. Fits Front or Rear Currie 60 or 70 axles. Designed to work with the GenRight JK Elite, Tracer or Legend Suspension Systems. Fits all Currie Rock Jock 60 or 70 purchased from...

    $244.99
    Add to Cart
  • Forged 1350 Yoke for Currie 60 or 70, 35 Splines, front or rear

    Currie Ent

    Forged 1350 Yoke for Currie 60 or 70, 35 Spline

    This is a Forged 1350 Yoke for Currie hi-pinion axles. 35 Splines. Fits Front or Rear Currie 60 or 70 axles. Designed to work with the GenRight JK Elite, Tracer or Legend Suspension Systems. Fits all Currie Rock Jock 60 or 70 purchased...

    $239.99
    Add to Cart
  • Currie Blank Hi-Steer Arm, Drivers Side (Left). Shown here bolted to a front axle assembly.

    Currie Ent

    Currie Hi-Steer Arm, Driver (LEFT) Side

    This is the Currie Hi-Steer Arm, Driver (LEFT) Side of a front axle. Knuckle must be machined to fit this Hi-Steer arm. Designed to work with the GenRight JK Elite, Tracer or Legend Suspension Systems. Fits all Currie Rock Jock 60 or 70...

    $129.99
    Add to Cart
  • Currie Blank Hi-Steer Arm, Passenger Side (Right). Shown here bolted to a front axle assembly.

    Currie Ent

    Currie Hi-Steer Arm, Driver (RIGHT) Side

    This is the Currie Hi-Steer Arm, PASSENGER (RIGHT) Side of a front axle. Knuckle must be machined to fit this Hi-Steer arm. Designed to work with the GenRight JK Elite, Tracer or Legend Suspension Systems. Fits all Currie Rock Jock 60 or 70...

    $129.99
    Add to Cart
  • GenRight Ram Mounting Tabs for Currie Axle and Hi-Steering Shaped to fit the Currie fabricated diff cover Perfect fit and location to our 1-3/8" diameter CrMo tie rod. Perfect fit and location on the Currie diff cover Here you can see how both hold the ram in the perfect location.

    GenRight

    Ram Mounting Tabs for Currie Axle

    This is a set of Ram Mounting tabs developed & made by GenRight Off Road. These are the same tabs we have used on all our builds like our Terremoto and the Growler Jeep Wranglers. One pair of tabs is made to fit the front diff cover of a Currie...

    $60.00
    Add to Cart
  • Dynatrac Pro Rock Dana 80 Rear Axle Dynatrac Pro Rock 80 with a GenRight Elite JK suspension The ProRock 80 looks impressive under a built Jeep! Here you can see the center section size, courtesy of JP magazine

    Dynatrac

    Dynatrac ProRock Dana 80 Rear Axle - Jeep JK

    GenRight is now offering the Dynatrac ProRock axles for our JK Elite Suspension System! This is the Dynatrac ProRock 80™ is the ultimate rear axle upgrade for the Jeep Wrangler JK. Big tires? Big power? No problem! No other axle in existence...

  • Dynatrac ProRock XD60 Front Axle with forged aluminum knuckles Close up of the forged knuckle with GenRight Steering heim Close up of the Dynatrac locking hub How the Dynatrac locking hub works XD60 installing with GenRight Elite JK Suspension

    Dynatrac

    Dynatrac ProRock XD60 Jeep Front Axle

    GenRight is now offering the Dynatrac ProRock axles for our Jeep Wrangler JK Elite suspension systems! The advantages of the all-new Dynatrac ProRock XD60® axle housing include: The axle was designed to hold a larger differential and 10...

24 of 24 Items

© 2024 GenRight Offroad All rights reserved. | Sitemap