null

MADE IN THE USA

phone: (805) 584-8635

Jeep XJ 84-'01

36 of 101 Items
  • GenRight Off Road's Universal Transmission Crossmember Kit Side view of the GenRight cross member holding trans and t-case in a Jeep build. Close up of the Urethane mount & tabs on each side of this universal cross member kit. Weld the tabs to the inside of the frame so there is clearance for your exhaust. GenRight BKT-1050 in '06 LJ Rubicon with the 6 speed manual.

    GenRight

    Universal Transmission Crossmember Kit

    This is a DIY (do-it-yourself) Universal Cross Member Kit to hold up your transmission (or transfer case). We have designed this kit to be compatible with a wide variety of engine and transmission configurations used in off road Jeeps. The cross...

    $249.99
    Add to Cart
  • Universal LED License Plate Light w/ Brake Light LED 3rd brake light on at night Here you can see the LED license plate light and 3rd brake light on at night Close up view of how this compact LED light looks and mounts. LED1650 license plate light with 3rd brake light.

    GenRight

    LED License Plate Light w/Long Harness

    This is a universal LED License light that cleanly mounts behind your rear license plate (that is necessary to be legal on the street). Designed to be used when running LED tail lights which eliminate the normal license plate light (off the...

    $49.99
    Add to Cart
  • Maxbilt LED Tail Lights are surface mount, no drilling. Here you can see running and stop lights at night. Shown here on the GenRight Terremoto JK 4 stages on the LED tail lights (off, stop, running and reverse)

    Maxbilt

    Maxbilt LED Tail Lights, Surface Mount

      This is a surface mounted LED tail light from Maxbilt LED (Light Emitting Diode) tail light for a Jeep TJ, LJ, YJ or CJ-7 (and JK in our corner guards). This is a manufacturer for GenRight that offers a no bones about it lifetime...

    $234.99
    $199.99
    Add to Cart
  • 1/4" Thick Extra Long Gussets (Pair) Gussets shown here on either side of the GenRight rear shock tower Gussets shown here on either side of the GenRight rear shock tower RMS-5513-P Extra Long Gussets (Pair) are 1/4" thick Shown here on the GenRight Growler YJ

    GenRight

    1/4" Thick Extra Long Gusset (Pair)

    This is an optional (but highly recommended) gusset for each side of shock tower from GenRight Off Road. This is the same gusset used on every GenRight Jeep build. They are Laser cut from Heavy Duty 1/4" thick plate steel. They are perfect for...

    $19.99
    Add to Cart
  • GenRight's Outboard Rear Shock Mount Kit Close up of JIG welded lower shock mounts, included in this kit. TJ/LJ/YJ/CJ Universal Outboard Rear Shock Mount Kit (Shocks not included) Lower shock mount installs on the back side of the rear axle tube. Outboard Rear Shock Mount Kit Mid-Install (Bump Cans not Included)

    GenRight

    Universal Outboard Rear Shock Mount Kit

    The GenRight outboard rear shock mount kit for the Jeep TJ, LJ, YJ or CJ-7 was designed to accept 2.0" coil over shocks. It is a perfect way to convert your rig to Coilover shocks! The clean and simple design which "frenches"...

    $399.99
    Add to Cart
  • GenRight's Hood Louver set Here is the typical mounting position for the 2 piece long hood louvers Typical mounting position for the 2 piece long hood louvers

    GenRight

    Hood Louver Set, 2pc Long - Black

    This is the GenRight Off Road 2 piece "long" hood louver set in black. This is a great way to vent that unwanted engine compartment heat and look good too! These louvers can be mounted in many different positions on the hood. Sold as a 2 piece set...

    $89.99
    Add to Cart
  • LED Back Up Light (Pair) We used 4 of these in the rear bumper on the GenRight Growler YJ. Here is a good view of the rear bumper plate on the GenRight Bowtie TJ.

    GenRight

    LED Back Up Light (Pair)

    This makes a great Back Up or Rock Light! These clear (or white) LED lights are nearly flush and a clean design! These lights will fit GenRight Jeep Rear Bumpers. This is also great option if you are removing you are installing...

    $29.99
    Add to Cart
  • Sale
    SSV MRB3 Display / Controller is fully sealed and has a back lit LED screen SSV MRB3 Bluetooth System Controller w/Screen with 4 Channel Amp Shown Installed in a Jeep Wrangler TJ using the GenRight aluminum radio plate Shown Installed in a Jeep Wrangler TJ on a black GenRight radio plate The LCD display is compact.

    SSV Works

    SSV MRB3 Bluetooth Audio w/ Screen & Amp

    Looking for a weather & dust proof solution for your Jeep? Well, this is Tony's favorite! This is a surface mounted display that replaces the traditional "stereo head unit" Your Jeep's new "stereo music" will be connected via Bluetooth...

    $299.99
    Was: $299.99
    Now: $229.99
    Choose Options
  • GenRight 3 piece long hood louver set in black Proper hood placement How the underside of the hood looks after mounting Installed on a Jeep Liberty

    GenRight

    Hood Louver Set, 3pc Long - Black

      This is the GenRight Off Road 3pc "long" hood louver set.Works great on Jeep TJ, LJ or YJ.They can be mounted in many different positions on the hood and are sold as a 3 piece set.This 3pc kit is: (1) Front louver has louvers in traditional...

    $99.99
    Add to Cart
  • This is how the kit comes, un-assembled This is what the kit looks like after welding GenRight Front 3 Link frame mounting brackets GenRight Front 3 Link frame mounting brackets This is how the frame side 3 link brackets lay out

    GenRight

    3 Link Front Bracket Kit, Chassis side (Unwelded)

    This is what the public has been asking for! A low cost DIY "builders kit" of our popular 3 link Front suspension brackets (not welded). We have figured out all the mounting points for proper geometry (bump steer, anti-squat, etc.) to make your rig a...

    $149.99
    Add to Cart
  • 1.5" - 2" Tubing Couplers (Sold Each)

    GenRight

    1.5" - 2" Tubing Couplers (Each)

    This is a Tube Coupler. They are designed to be strong and perfect for use in situations where you need a removable tube. Simply weld (MIG or TIG) each side into the tube you want to remove. These couplers are meant for use with .120 wall tubing (1.5",...

    $49.99 - $54.99
    Choose Options
  • GR Round LED Lights Rear view of GR LED Round Lights

    GenRight

    GenRight LED Back Up / Rock Lights

    This is the all new SUPER bright LED light from GenRight Off Road. Fits into our existing laser cut holes in most of our bumpers, or you can drill your own and attach it with the threaded nut on the back side. Can be used as Rock Lights or Back Up...

    $99.99
    Add to Cart
  • High Clearance Lower Rear Shock Mount Kit

    GenRight

    High Clearance Lower Rear Shock Mount Kit

      This is the lower rear shock mount (axle side) kit. Similar to our outboard rear shock mount kit, but this is only the lower mounts.This is perfect for someone who already has our kit but is changing axles and who does not want to cut...

    $124.99
    Add to Cart
  • GenRight Off Road XJ Enduro Gas Tank & Skid Plate (30.5 Gal) XJ Crawler Tank installed Line drawing and dimensions for GenRight Off Road XJ Enduro Gas Tank & Skid Plate (30.5 Gal)

    GenRight

    Jeep XJ Gas Tank & Skid Plate (30.5 Gal)

    This is the GenRight Off Road Extra Capacity Fuel Tank for the Jeep Cherokee, XJ that was featured in JP Magazine back in October of 2008 in the "Mileage Master" articles. Now you can explore with confidence with up to a 500 mile range! This...

    $1,849.99
    Add to Cart
  • King 2.0" Air Bump with Can King 2" air bump on the GenRight Elite Suspension Shown here next to a Jeep TJ frame with King 2.0 can frenched into it. Shown here with GenRight shock mount and frame plate after frenching in can Shown here on the GenRight Growler YJ

    King Shocks

    King Shocks 2.0" Air Bump w/ Can

      This is the King Shocks Brand of 2.0" diameter Air Bump (Sold Each). These are the best air bumps money can buy. This is the same air bump we used on our GenRight Growler Jeep to pre-run for 8 weeks at the Hammers for the 2010 King of the...

    $379.99
    Add to Cart
  • 1/4" Thick Straight Tab (Pair) 1/2" Diameter Hole Typical installation as a lower shock mounts Tab welded onto the inside of the frame

    GenRight

    1/4" Thick Straight Tab (Pair)

    This is a top quality "straight" mounting tab from GenRight Off Road. They are Laser cut from Heavy Duty 1/4" thick plate steel.They are perfect for mounting limit straps or other things on your Jeep. Features: Material - 1/4"...

    $11.99
    Add to Cart
  • GenRight Die Cut Vinyl Windshield Decal The same decal Tony runs on the windshield of the Terremoto JK Colors available

    GenRight

    GenRight Die Cut Vinyl Windshield Decal

      Now is your chance to represent GenRight Off Road, your favorite American Made Jeep company! This is the same windshield sticker that Tony and the rest of the GenRight crew run on their Jeeps. FEATURES: Cut from premium 3M vinyl this is a...

    $14.99
    Choose Options
  • BKT-3110 lower control arm 10 degree brackets from GenRight Off Road Shown here a the rear axle tube One piece design allows for more weld surface on the axle tube

    GenRight

    10 Deg Lower Control Arm Brackets

    These are top quality 10 Degree lower control arm mounting brackets from GenRight Off Road. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly. Unlike the old days where fabricators just welded individual tabs...

    $69.99
    Add to Cart
  • 3" Upper Control Arm Mount (Axle Side), BKT-3240 Shown here welded to the top of a rear axle bridge (limit strap tab optional)

    GenRight

    3" Upper Control Arm Mount (Axle Side)

    This is the GenRight 3" tall Universal Control Arm Mounting Bracket. It is designed to be welded on the Axle Side and can be modified to fit any upper control arm vehicle application. The mount is universal and can be cut or trimmed to be...

    $44.99
    Add to Cart
  • 1/4" Thick Radius Tab (Pair)

    GenRight

    1/4" Thick Radius Tab (Pair)

    These are top quality Radius Tabs from GenRight Off Road. They are Laser cut from Heavy Duty 1/4" thick plate steel. They are perfect for mounting limit straps or other things on curved surfaces (axle tubes or knuckles). Features: Material...

    $11.99
    Add to Cart
  • Sale
    SSV connector for the MRB3 to run an external amp.

    SSV Works

    RCA Wire Harness for Amplifier

    Already have a MRB3 system but want to add more speakers or a subwoofer? Then you will need this harness to connect an amplifier to power the additional speakers or subwoofer. Simply plug this harness into your MRB3's "AMP OUT" plug and the other end...

    $9.99
    Add to Cart
  • GenRight's 5 piece hood louver set Louvers placement on the hood 5 piece hood vent kit on a Red Jeep Step 1 - tape the mounting surface Step 2 - trace the shape and measure 1/2" in all the way around

    GenRight

    Hood Louver Set, 5pc - Black

    This is the GenRight Off Road 5 piece hood louver set for a Jeep TJ/LJ or YJ in black. This configuration offers maximum cooling for your engine compartment! The louvers can be mounted in many different positions on the hood and (this part number) is...

    $179.99
    Add to Cart
  • VPP1001 - GenRight Vented Power Steering Pulley The GenRight Underdrive pulley spinning and pushing air over the pump GenRight Vented Power Steering Pulley - Red GenRight Vented Power Steering Pulley - Blue

    GenRight

    Vented Power Steering Pulley

      This is not just eye candy... Big tires and tough trails will make your power steering pump work hard and get incredibly hot! Hot fluid will dramatically shorten the life of the fluid and the pump. GenRight's vented power steering pulley has...

    $199.99
    Choose Options
  • GenRight Aluminum Cargo Rack GenRight Aluminum Cargo Rack (ACC-10101) GR Aluminum Cargo Rack (ACC-10101) GenRight Aluminum Cargo Rack (ACC-10101) with JL cage mounts Sleek, lightweight design.

    GenRight

    GenRight Aluminum Cargo Rack

    This low profile aluminum cargo rack is a great lightweight solution from GenRight Off Road. Perfect for those camping trips where you are carrying lots of gear, or overlanding. Storage issues? Not anymore, now you can divide up the rear cargo area in...

    $399.99
    Choose Options
  • Hood Louver Set, 2pc Short - Black

    GenRight

    Hood Louver Set, 2pc Short - Black

    This is the Gen-Right Off Road 2 pc "short" hood louver set for any Jeep or other vehicle with a relativly flat hood.These are intended to be mounted in the rear position on the hood and are sold as a 2 piece set.This 2pc kit is: 2 short louvers,...

    $89.99
    Add to Cart
  • Jeep JK/TJ/LJ/YJ/CJ Rear Bump Stop Pad Kit SUP-1002 Rear Bump Stop Pad Kit (Assembled, Unwelded) Close up of the GenRight rear bump pad with 14" coil over shock Here you can see how the bump pads engage with the bump stops when flexed Another view on the bump pad mounted on rear axle

    GenRight

    Universal Rear Bump Stop Pad Kit

    This is the axle side, lower bump stop "pad" from GenRight Off Road. A simple and low cost solution for bump stops on your Jeep. Here is how it works: This kit can be installed with our Urethane Bump Stops or King/FOX Shocks 2.0" air bump,...

    $199.99
    Add to Cart
  • Universal 4 Pass Power Steering Cooler Kit Here you can see how this thin cooler mounts behind the grill

    GenRight

    4 Pass Power Steering Cooler

    This is a 4 Pass cooler (8-1/8" Wide x 5" tall x 3/4" deep), that is an excellent tube-fin heat exchanger, which improves the longevity and overall functioning of your vehicle's power steering system. It installs on the low pressure (return side) of...

    $44.99
    Add to Cart
  • Panel mount kit for USB charging or audio in through 3.5mm plug USB and 3.5mm (1/8") audio in jack are covered. Seen here on the right side of picture.

    SSV Works

    MRB3 3.5mm Aux-in & USB Charging Panel Mount Kit

    This is a nice upgrade to your MRB3 bluetooth audio unit. Now you can direct connect an "aux-in" 3.5mm jack for the MRB3 unit. FEATURES: Weather proof connector to MRB3 unit. Flush mount type port with weather proof cap (as pictured). Includes a 3'...

    $59.99
    Add to Cart
36 of 101 Items

© 2024 GenRight Offroad All rights reserved. | Sitemap