null

MADE IN THE USA

phone: (805) 584-8635

Suspension

Our suspension kits have been developed over 10 years, 480 trails, countless vehicles, and multiple King of the Hammers races. We have taken our knowledge and transformed it into packages to provide our customers with the best suspension available in the industry. This includes a variety of products ranging from complete 3 or 4-link suspension to individual brackets and tabs for the DIY fabricators, both of which will save you time and money.

180 of 253 Items
  • The 3 Link upper link mount can put on either side by the installer GenRight Front 3 Link frame mounting brackets GenRight Front 3 Link frame mounting brackets This is how the frame side 3 link brackets lay out Drivers side tacked into position on a Jeep TJ frame

    GenRight

    3 Link Front Bracket Kit

    This is the GenRight 3 link Front Bracket Kit for a Jeep Wrangler TJ, LJ or YJ (but can be made to fit the CJ-7 too).Front 3 Link Kit FEATURES: Single upper control arm (to the top of the axle) allows the installer more flexibility to locate...

    $349.99
    Add to Cart
  • GenRight's Hi-Steer Arm for the Elite Suspension Here is the arm on the Currie knuckle with heim steering Here you can see the hi-steer arm on the Currie axle and knuckle.

    GenRight

    Hi-Steer Arm for Currie RockJock Knuckle

    This is the GenRight modified Currie Hi-Steer arm. It has been modified to have the correct geometry to work with the GenRight JK Elite Suspension System. It positions the drag link in the proper location to match the pitman arm length so you can...

    $349.99
    Add to Cart
  • 1" Vent Hose Kit for Off-Road Racing Fuel Cell 1" vent hose kit at the high point 1" vent hose kit off the fuel cell (smaller blue hose)

    GenRight

    1" Vent Hose Kit for Off-Road Racing Fuel Cell

    This is a 1" diameter vent kit for the GenRight Race legal Fuel Cell. This is the same thing we use on the GenRight Terremoto Jeep JK. Designed to be low profile and take the minimal amount of space away from the cargo area. Enough tubing supplied in...

    $299.99
    Add to Cart
  • Sale
    Daystar adjustable trac bar for the Jeep Wrangler JL & JT

    Daystar

    Adjustable Trac Bar for Jeep Wrangler JL & JT

    This is Daystar's Front Adjustable Trac Bar fits both Jeep Wrangler JL's and Jeep Gladiator (JT). It will keep your axle perfectly centered under your Jeep and eliminate wobble. This heavy duty trac bar is stronger and more durable than...

    $299.99
    Add to Cart
  • JK Elite front bump can mounts Here you can see the front bump can welded in place next to the shock tower

    GenRight

    JK Elite Front Bump Can Kit (Pair), 2 and 4 door

     This is the GenRight Front Bump Stop kit for the front JK Elite Suspension System. It is a simple and low cost solution for bump stops on a Jeep! Here is how it works: These Urethane Bump Stops fit in a KING 2.0" diameter air bump...

    $299.99
    Add to Cart
  • JK Elite rear bump can mounts Here you can see the bump cans welded into place on the rear shock towers. Here is what it looks like when finished.

    GenRight

    JK Elite Rear Bump Can Kit (Pair), 4 door

     This is the GenRight rear bump stop kit for the Rear JK Elite Suspension System. These Bump Stops "cans" fit in a KING 2.0" diameter air bump can. FEATURES: A must for running coil over shocks. Designed to "key" into the GenRight JK Rear...

    $299.99
    Add to Cart
  • Genright's Rear Axle Bridge, 14 Bolt, Un-welded 14 Bolt Axle Bridge on rear axle housing. Rear Axle Bridge over the housing. Basic dimensions so you can verify it will fit your application

    GenRight

    Rear Axle Bridge, 14 Bolt, Un-welded

    If you are Triangulating (or linking) the suspension on your Jeep, you will need a "Bridge" (or Truss) above the differential housing on the rear axle to mount the upper control arms. This is GenRight's low profile Rear Axle Bridge...

    $299.99
    Add to Cart
  • Sale
    TJ/LJ/YJ 1" Body Lift

    GenRight

    TJ/LJ/YJ 1" Body Lift

    This is a high quality urethane type 1" Body Lift for a Jeep TJ, LJ and YJ. This is the same type body lift we use on every GenRight Jeep we build.It is an excellent and necessary upgrade for Jeeps 2003 and newer to fit any brand high clearance gas...

    $299.99
    Add to Cart
  • Universal Urethane Bump Stop (Pair) w/ Bump Cans Same length as a compressed air bump stop, so you can upgrade down the road Shown here on the rear suspension with coil over shock Shown here on the front suspension set up for a coil over shock

    GenRight

    Universal Urethane Bump Stop (Pair) w/ Bump Cans

      This is the GenRight "Rock Stomper" Urethane bump stops. It is a simple and low cost solution for bump stops on a Jeep! Here is how it works: These Urethane Bump Stops fit in a KING 2.0" diameter air bump can. This allows you to...

    $299.99
    Choose Options
  • Bilstein 2.0 Air Bump, sold each

    Bilstein

    Bilstein M 9100 Air Bump 2” Stroke (Sold Each)

    This is the Bilstein 2.0" diameter Air Bump (aka: hydraulic bump stop). It has a 4" stroke and is tunable & rebuildable. Used by most of the competition vehicles for it's performance characteristics, it is perfect for additional suspension...

    $254.99
    Add to Cart
  • GenRight's Dana 60 Rear Axle Bridge, Un-Welded Rearview of Dana 60 Rear Axle Bridge on a 4 link set up. Dana 60 Rear Axle Bridge, with upper links. Basic dimensions so you can verify it will fit your application

    GenRight

    Rear Axle Bridge, Dana 60 Un-Welded

    If you are Triangulating (or linking) the suspension on your Jeep, you will need a "Bridge" (or Truss) above the differential housing on the rear axle to mount the upper control arms. This is GenRight's low profile Rear Axle Bridge...

    $249.99
    Add to Cart
  • SUP-1001 GenRight's front axle bump stop pad kit This is how it looks when the pieces are tacked together Shown here installed with GR Urethane bump stop Rear view of the driver side bump stop mount Side view of the driver side bump stop mount

    GenRight

    Universal Front Bump Stop Pad Kit

    This is the GenRight FRONT bump stop "pad" kit. It is a simple way to get bump stops on the front of your coil over shock Jeep! Since space is limited on the front axle, we designed a combo lower control arm mount with bump stop pad kit. Designed...

    $249.99
    Add to Cart
  • GenRight's Short Rear Shock Towers, RSM-1000 Shown here is an outboard shock tower with remote res Raise up the entire shock and move it outboard for better dampening control Another mounting solution with this rear shock tower

    GenRight

    Universal Outboard Rear Shock Tower Kit, Short

      This is a SHORTER and thinner version of our RSM-1001 outboard rear shock towers for the Jeep Wrangler TJ, Jeep LJ, Jeep YJ or CJ-7. It is designed to accept 2.0" shocks. It is a perfect way to convert your rig to outboard...

    $249.99
    Add to Cart
  • GenRight Off Road's Universal Transmission Crossmember Kit Side view of the GenRight cross member holding trans and t-case in a Jeep build. Close up of the Urethane mount & tabs on each side of this universal cross member kit. Weld the tabs to the inside of the frame so there is clearance for your exhaust. GenRight BKT-1050 in '06 LJ Rubicon with the 6 speed manual.

    GenRight

    Universal Transmission Crossmember Kit

      This is a DIY (do-it-yourself) Universal Cross Member Kit to hold up your transmission (or transfer case). We have designed this kit to be compatible with a wide variety of engine and transmission configurations used in off road Jeeps. The...

    $249.99
    Add to Cart
  • Heavy Duty Currie Fabricated Diff Cover Hardware, fill plug and gasket are included. Currie Fabricated Diff Cover for 60 or 70 axles.

    Currie Ent

    Currie Fabricated Diff Cover 60 or 70

    This is the Currie Heavy Duty Fabricated Differential Cover. Fits Front or Rear Currie 60 or 70 axles. Designed to work with the GenRight JK Elite, Tracer or Legend Suspension Systems. Fits all Currie Rock Jock 60 or 70 purchased from...

    $244.99
    Add to Cart
  • Forged 1350 Yoke for Currie 60 or 70, 35 Splines, front or rear

    Currie Ent

    Forged 1350 Yoke for Currie 60 or 70, 35 Spline

    This is a Forged 1350 Yoke for Currie hi-pinion axles. 35 Splines. Fits Front or Rear Currie 60 or 70 axles. Designed to work with the GenRight JK Elite, Tracer or Legend Suspension Systems. Fits all Currie Rock Jock 60 or 70 purchased...

    $239.99
    Add to Cart
  • Automatic Transmission mount for 2012 and Up on the front cross member

    GenRight

    JK Transmission Mount, '12 - '17

    This is a Automatic Transmission Mount for the GenRight JK Elite Suspension System for a 2012 to Present Jeep JK. It is used to hold up your transmission (and transfer case), independent of your vehicle's belly skid plate. We have designed this to be...

    $219.99
    Add to Cart
  • 1" Engine Lift mounts are urethane bushed

    RockJock

    1" Motor Lift, TJ/LJ/YJ

    This is a 1" lifted motor mount(s) to fit a 1987-2006 Jeep TJ/LJ/YJ vehicles equipped with the 4.0L (or 4.2L) 6 cylinder engine. These specially designed motor mounts lift the front of the engine one inch which produces a reduced driveline angle on...

    $199.99
    Add to Cart
  • GenRight's aluminum fuel filler bezel Installing the bezel on the side of a Jeep JK Fits the Dry Break quick fill perfectly Removable cap for filling when dry break is not available.

    GenRight

    Aluminum Fuel Fill Bezel

    This is an aluminum fuel bezel for the DBC-400 dry break (quick fill). Originally intended for use with the GenRight Race legal Fuel Cell, but it can be adapted to the side of any vehicle. This is the same thing we use on the GenRight Terremoto Jeep JK...

    $199.99
    Add to Cart
  • Sale
    1-3/4" Daystar puck lift Shown here with 35" tires (using only the 1-3/4" puck lift and GenRight tube fenders)

    Daystar

    Daystar 1-3/4" Lift Kit for the Jeep Wrangler JK

    This is the Comfort Ride system from Daystar. It will raise the front & rear the JK Wrangler 1¾" for a level vehicle stance. It installs easily with no welding or drilling. It will maintain factory ride quality. The kit comes complete...

    $199.99
    Add to Cart
  • BMT-8051 Heavy Duty Body Mount Kit for Jeep Wrangler JKU Heavy duty body mount welded onto the stock frame Passenger side body mounts welded on HD Body Mounts welded and ready for paint

    GenRight

    Heavy Duty Body Mount Kit for Jeep JK

      This is a Heavy Duty body mount kit from GenRight Off Road. Designed for the Jeep Wrangler JKU (2007 - 2018). It replaces the thin stock body mounts that are easily smashed and deformed over years of off-roading. These new mounts...

    $199.99
    Add to Cart
  • Jeep JK/TJ/LJ/YJ/CJ Rear Bump Stop Pad Kit SUP-1002 Rear Bump Stop Pad Kit (Assembled, Unwelded) Close up of the GenRight rear bump pad with 14" coil over shock Here you can see how the bump pads engage with the bump stops when flexed Another view on the bump pad mounted on rear axle

    GenRight

    Universal Rear Bump Stop Pad Kit

    This is the axle side, lower bump stop "pad" from GenRight Off Road. A simple and low cost solution for bump stops on your Jeep. Here is how it works: This kit can be installed with our Urethane Bump Stops or King/FOX Shocks 2.0" air bump,...

    $199.99
    Add to Cart
  • BMT-2001 GenRight's Hi-Clearance Body Mounts for the Jeep TJ or LJ Before - with factory body mounts on the frame After - with GenRight hi-clearance body mounts on the frame Close up of the new GenRight BMT-2001 body mounts on the frame Easy to see the difference in this picture!

    GenRight

    Body Mount LIFT Kit, TJ / LJ

      This is another innovative and long over due product from GenRight Off Road. It is a new set of hi-clearance body mounts to raise up the 3 mounts on both sides (under the rocker guard) that always get hit on trail obstacles! Yes, we...

    $179.99
    Add to Cart
  • BMT-4001 GenRight's Hi-Clearance Body Mount Kit for the Jeep YJ Here you can see the difference between stock and GenRight's The same body mounts Tony had on his Growler YJ

    GenRight

    Body Mount LIFT Kit, YJ

    This is another innovative and long over due product from GenRight Off Road. It is a new set of hi-clearance body mounts to raise up the 3 mounts on either side (under the rocker guard) that always get hit on trail obstacles! Yes, we designed...

    $179.99
    Add to Cart
  • BMT-2051 GenRight's Heavy Duty Body Mounts for the Jeep TJ or LJ Before - with factory body mounts on the frame

    GenRight

    Heavy Duty Body Mount Kit, TJ / LJ

    This is a Heavy Duty body mount kit from GenRight Off Road. It replaces the stock thin & cheesy body mounts that are easily smashed and deformed. These new mounts are Laser cut from Heavy Duty 3/16" thick plate steel. This model body mount...

    $179.99
    Add to Cart
  • This is a Non-electric line lock, parking brake, emergency brake We offer two different mounting styles for your application A mounting style for this line lock, parking brake B mounting style for this line lock, parking brake Technical specifications for mounting this hydraulic ball valve

    GenRight

    Ball Valve Parking Brake

    This is a simple (non-electric) hydraulic ball valve assembly that can be used as an inline parking brake. How does it work? You simply step on the brake pedal and turn the lever. It then locks the pressure in the brake line (as if you were...

    $179.99 - $189.99
    Choose Options
  • GenRight's Rear Axle Bridge for the Dana 44 Axle Housing Rear View of GenRight's Rear Axle Bridge for the Dana 44 Axle Housing Front View of GenRight's Rear Axle Bridge for the Dana 44 Axle Housing Basic dimensions so you can verify it will fit your application

    GenRight

    Dana 44 Rear Axle Bridge - Unwelded

    This is a weld-on REAR Axle Bridge for the factory Jeep JK  or JKU Dana 44 rear axle from GenRight Off Road. If you Triangulating (or linking) your Jeep's rear suspension, you will need a "Bridge" (or truss) like this on the rear axle...

    $169.99
    Add to Cart
  • This is how the kit comes, un-assembled This is what the kit looks like after welding GenRight Front 3 Link frame mounting brackets GenRight Front 3 Link frame mounting brackets This is how the frame side 3 link brackets lay out

    GenRight

    3 Link Front Bracket Kit, Chassis side (Unwelded)

     This is what the public has been asking for! A low cost DIY "builders kit" of our popular 3 link Front suspension brackets (not welded). We have figured out all the mounting points for proper geometry (bump steer, anti-squat, etc.) to make your...

    $149.99
    Add to Cart
  • Transmission mount for 2007 to 2011 Automatic Here is a view of the Transmission mount for '07 - '11 on the front cross member.

    GenRight

    JK Transmission Mount, '07-'11

    This is a "Universal" Automatic Transmission Mount for the GenRight JK Elite Suspension System, it is designed to fit the 2007 - 2011 Jeep JK. It comes longer than needed to accept several different transmissions. It is used to hold up your...

    $149.99
    Add to Cart
  • RSM-2150 Rear Coil Spring correction Kit for the Jeep TJ This is the mounting location of the new brackets AFTER GenRight Coil Correction kit is installed BEFORE Coil Correction kit is installed Carefully cut off and clean the frame for the new brackets to be mounted

    GenRight

    Rear Coil Spring Correction Kit

    This is a rear coil spring mounting kit or it can be used as a coil spring correction kit On a Jeep TJ or LJ. This is a low cost way to move the coil spring back on the frame is laser cut and formed from heavy duty 3/16" and 1/4" thick steel and...

    $149.99
    Add to Cart
  • Bump Stop Can, Pair

    GenRight

    Bump Stop Can, Pair

    This is a King Shock manuafacturered AIR BUMP CAN only. Intended for use with a KING 2.0" diameter air bump. But also fits the GenRight Rock Stomper Urethane bumps too!This is a weld-on item.FEATURES: Holds a King 2" Air Bump or GenRight Rock...

    $129.99
    Add to Cart
180 of 253 Items

© 2024 GenRight Offroad All rights reserved. | Sitemap