null

MADE IN THE USA

phone: (805) 584-8635

Jeep TJ to LJ Conversion Kit

This kit converts your TJ to an LJ for added stability and a longer wheelbase with the back half frame kit, which is made of heavy duty 3/16" Steel. It is the most simple, efficient way to get a longer wheelbase. We offer the full kit, with the frame section, shock towers, rear bumper, rear quarter panel fillers, and an aluminum bed... or, you can opt for the individual components.

15 of 15 Items
  • Genuine Rock Jock (Currie) Johnny Joint CE-9114 with 1-1/4"-12 shank How it works: special compound urethane, sintered metal ball, washers and clip Johnny Joints on both ends of GenRight 7075 aluminum control arms Johnny used on an upper control arm of a suspension Johnny Joints on double triangulated rear suspension

    RockJock

    Johnny Joint, 1-1/4 Shank by Rock Jock

    This is a genuine Rock Jock Johnny Joint (by John Currie) with a 1-1/4-12 threaded shank for suspension control arms. A Johnny Joint is a suspension end designed to smoothly rotate up to 30 degrees without binding (or degrading which...

    $66.00
    Choose Options
  • King 2.0" Air Bump with Can King 2" air bump on the GenRight Elite Suspension Shown here next to a Jeep TJ frame with King 2.0 can frenched into it. Shown here with GenRight shock mount and frame plate after frenching in can Shown here on the GenRight Growler YJ

    King Shocks

    King Shocks 2.0" Air Bump w/ Can

      This is the King Shocks Brand of 2.0" diameter Air Bump (Sold Each). These are the best air bumps money can buy. This is the same air bump we used on our GenRight Growler Jeep to pre-run for 8 weeks at the Hammers for the 2010 King of the...

    $379.99
    Add to Cart
  • AGM Suspension Slider (Sold Each) Individual components shown Eliminates coil bind by allowing the upper and lower spring to rotate as they compress The AGM slider is made in 3 pieces. AGM Suspension Slider Sizes

    AGM

    AGM Suspension Sliders (Sold Each)

    This is the AGM "Slider", we use it on every GenRight vehicle. It is designed to replace the noisy plastic slider on a King or Fox coil over 2.0", 2.5" or 3.0" shock. The AGM Shock Slider is precision dual rate spring divider designed to keep the...

    $125.99 - $219.99
    Choose Options
  • TJ to LJ Body Extension Panel with soft top lip. TJ to LJ Body Extension Panel pieces. Easily welded into place to look completely factory!

    GenRight

    TJ to LJ Body Extension Panels

    This is the formed sheet metal pieces you need to fill the 15" gap in your tub when using our TJ to LJ conversion kit. Once done, a factory LJ Hard top or Soft top will fit your TJ. Features: Two pieces for each side (4 pieces total). Same...

    $99.99
    Add to Cart
  • Jeep LJ Tracer Stretch Corner Guard Set - Aluminum Here is how it works, we move the entire wheel opening back 4" Shown here with a EXT flare to move the axle even further back!

    GenRight

    Tracer Stretch LJ Corner Guard Set - Aluminum

    This is the Aluminum "Full" type Corner Guard for the UnlimitedJeep Wrangler LJ with STRETCH FENDER WELL location for the GenRight Off Road TRACER suspension. Features: Laser cut and shape is formed with a custom "one hit" die to assure a...

    $899.99
    Add to Cart
  • GenRight Off Road Rear Sway Bar Kit for the Jeep LJ with Tracer Suspension Shown here installed on Jeep LJ frame with GenRight Tracer Suspension System

    GenRight

    Tracer Jeep LJ Rear Sway Bar Kit

      This is the GenRight rear sway bar kit to fit our "Tracer" Jeep LJ Suspension Kit This kit was designed to add stability to your lifted or long travel Jeep Wrangler LJ. It is a weld-on kit. Our sway bar is about 30% stiffer than...

    $849.99
    Add to Cart
  • High Capacity Fuel Tank for the Tracer Suspension View of the axle side of the High Capacity Fuel Tank for the Tracer Suspension Side view of the High Capacity Fuel Tank for the Tracer Suspension 100% TIG Welded 1/8" thick Aluminum Tank Here you can see the fit using a Currie 70 rear axle and the 6053 tank

    GenRight

    26 Gal Gas Tank for Tracer Susp w/7" Stretch

    This is the larger capacity fuel tank is designed to work with the GenRight Tracer Suspension System in a stretched Jeep Wrangler LJ. Fully assembled and designed to accept the factory Jeep 05-'06 fuel pump module (or the Aeromotive Phantom in-tank fuel...

    $1,949.99
    Add to Cart
  • All new aluminum cargo area for your Jeep TJ Integrated fuel pump access panel into new cargo area floor New fender wells use the corner guard bolts to hold them in place (no extra holes to be drilled) Cargo area body mounts to the frame are maintained and support the rear floor This is how it looks after cutting out the stock cargo area floor.

    GenRight

    TJ to LJ Cargo Area Kit

    This is our TJ to LJ Cargo Area Kit for our TJ to LJ Frame Stretch Kit. Hide all the cut and stretched sheet metal with this high quality aluminum cargo area interior. It is easy to install, because it uses all the same holes that your GenRight corner...

    $1,899.99
    Add to Cart
  • GenRight Ram Mounting Tabs for Currie Axle and Hi-Steering Shaped to fit the Currie fabricated diff cover Perfect fit and location to our 1-3/8" diameter CrMo tie rod. Perfect fit and location on the Currie diff cover Here you can see how both hold the ram in the perfect location.

    GenRight

    Ram Mounting Tabs for Currie Axle

    This is a set of Ram Mounting tabs developed & made by GenRight Off Road. These are the same tabs we have used on all our builds like our Terremoto and the Growler Jeep Wranglers. One pair of tabs is made to fit the front diff cover of a Currie...

    $60.00
    Add to Cart
  • Currie Enterprises Rock Jock 70 Rear Axle Currie Enterprises Rock Jock 70 Rear Axles in stock Currie Rock Jock 70 Rear Axle in the GenRight Terremoto JK The Currie Rock Jock 70 being put to the test on Pritchett Canyon in Moab, UT. We run the Currie Rock Jock 70 in our 800HP Unlimited Class off-road race car

    Currie Ent

    Currie 70 Full Float Jeep Rear Axle - Complete

    This is the Currie Extreme 70 complete REAR Axle. This is the same axle we run in our 800HP Ultra4 racer, 640HP Terremoto Jeep Wrangler JK and Bowtie Jeep TJ since 2014! This is a complete Full Float, 40 spline rear axle with NO mounting brackets...

    $10,599.99
    Choose Options
  • When the TJ to LJ kit is assembled it looks like this The Genright Off Road TJ to LJ kit Tub "patch piece" that makes it look like a factory LJ This is the new rear frame tacked into place This is the factory frame to new frame fish plate reinforcement

    GenRight

    TJ to LJ Frame Kit

    This is the GenRight Off Road TJ to LJ Frame Stretch Kit. Do you have a bunch of money invested into your Jeep TJ, but wish it was an LJ for the longer wheelbase and increased cargo area? Now you can take any Jeep TJ (previously built or unbuilt)...

    $1,999.99
    Choose Options
15 of 15 Items

© 2024 GenRight Offroad All rights reserved. | Sitemap