null

MADE IN THE USA

phone: (805) 584-8635

Fabrication

36 of 90 Items
  • When the TJ to LJ kit is assembled it looks like this The Genright Off Road TJ to LJ kit Tub "patch piece" that makes it look like a factory LJ This is the new rear frame tacked into place This is the factory frame to new frame fish plate reinforcement

    GenRight

    TJ to LJ Frame Kit

    This is the GenRight Off Road TJ to LJ Frame Stretch Kit. Do you have a bunch of money invested into your Jeep TJ, but wish it was an LJ for the longer wheelbase and increased cargo area? Now you can take any Jeep TJ (previously built or unbuilt)...

    $1,999.99
    Choose Options
  • GenRight Aluminum Dash for the Jeep Wrangler TJ & LJ Defroster vents cut into top of dash Good look at GenRight dash and center console in a Jeep Wrangler TJ. Front edge is covered in case you don't run a windshield. Shown here with Holley Display and iPad Mini.

    GenRight

    Jeep TJ & LJ Laser Cut Aluminum Dash

    This is the GenRight aluminum dash kit for the Jeep Wrangler TJ & LJ. Customize your Jeep TJ or LJ with GenRight's Laser Cut Aluminum Dash.This dash is ideal for the builder who is modifying the interior and moving to a custom look and ultra...

    $999.99
    Add to Cart
  • GenRight Aluminum Dash for the Jeep YJ Defroster vents cut into top of dash YJ Dash installed with optional center console and equipment installed Exploded view of YJ Dash parts (Hardware is included)

    GenRight

    Jeep YJ Laser Cut Aluminum Dash

    This is the GenRight aluminum dash for the Jeep YJ. Customize your Jeep YJ with GenRight's Laser Cut Aluminum Dash.This is the same dash Jami is using in the legendary GenRight Growler YJ.This dash is ideal for the builder who is modifying the...

    $999.99
    Add to Cart
  • GenRight LS Engine Mounting kit for the Tracer Suspension

    GenRight

    Tracer LS Engine Mounts

    This is the Chevy LS V8 engine mounting kit for the GenRight LJ TRACER suspension system. Sold as an option/upgrade to the Tracer kit. These mounts are designed to move the engine over to the passenger side and clear the upper front link at full bump...

    $1,099.99
    Add to Cart
  • Weld on Tabs for the GenRight Jeep JK Swing Out Tire Carrier Shown here welded to a steel corner guard and powder coated MIG Welded into place on the GenRight corner guards Really cleans up the corner of the Jeep when the tabs are welded on. Shown here with GenRight tire carrier

    GenRight

    Jeep JK Weld on Tabs for Swing Out Tire Carrier

    This is a set of weld-on Tabs to mount the GenRight Swing Out Tire Carrier directly to the driver side rear corner guard (eliminating the latch plate). These heavy duty laser cut tabs are sold as a set. Must be welded in place on the Jeep for...

    $29.99
    Add to Cart
  • Universal HD Axle Side Trac Bar Mount (Kit) This is what the part looks like after you weld it together Shown here tack welded into place to verify everything clears before final welding

    GenRight

    Universal HD Axle Side Trac Bar Mount (Kit)

    This is a Builders Kit product, it does NOT come welded (If you'd like to buy the welded version, it can be found here). Features: Designed to maximize the mounting space and allow clearance for the shock and steering. Design to...

    $49.99
    Add to Cart
  • LS Engine Accessory Bracket Mounting Kit Shown here installed on an LS3 in a Jeep LJ Shown here installed on an LS3 with remote steering res above the pump LS Engine Accessory Bracket Mounting Kit Here you can see how we capture the power steering pump onto the LS head

    GenRight

    LS Engine Accessory Bracket Mounting Kit

    This is the GenRight LS Engine accessory mounting bracket kit for your off road Jeep Wrangler. These beefy laser cut brackets move the engine accessories up out of the way. It mounts the GM alternator, PSC power steering pump and reservoir (as...

    $489.99
    Add to Cart
  • 5/16"-18 X 1" Flat Head Socket Bolts (10 Pack) Here you can see these countersunk SS bolts on the GenRight rockers and corner guards

    GenRight

    5/16"-18 X 1" Flat Head Socket Bolts (10 Pack)

    This item is a 5/16"-18 X 1" long Stainless Steel Flat Head Socket Bolts (10 Pack). These are the same allen bolts we use in our Rocker Guard Kits, Corner Guard Kits, Tub Panel Guards and More. Accepts a 3/16" allen key wrench. We also sell matching...

    $14.99
    Add to Cart
  • Weld on GenRight Logo Badge (Multiple Sizes) - Pair The laser cut "badge" can be added to any curved or flat surface you want.

    GenRight

    Weld on GenRight Logo Badge (Multiple Sizes) - Pair

    This is a laser cut GenRight "GR badge" that can be tacked onto any curved or flat surface you want. FEATURES: Laser Cut from 1/8" steel Available in 5 sizes. Can be can be tack welded on to any GenRight product you want to stand out. Sold as a...

    $5.99 - $9.99
    Choose Options
  • Jeep YJ Laser Cut Aluminum Dash w/ Switch Panel Shown installed in the legendary GenRight Growler YJ (Center Console not included) Aluminum flat dash for the Jeep YJ with Holley display and MIL Spec switches View of the YJ dash in the Growler from the drivers side.

    GenRight

    Jeep YJ Laser Cut Aluminum Dash w/ Switch Panel

      This is the GenRight aluminum dash for the Jeep YJ. Customize your Jeep YJ with GenRight's Laser Cut Aluminum Dash w/center switch panel section and master power switch. This is the same dash that was in the legendary GenRight Growler for years...

    $449.99
    Choose Options
  • GenRight Ram Mounting Tabs for Currie Axle and Hi-Steering Shaped to fit the Currie fabricated diff cover Perfect fit and location to our 1-3/8" diameter CrMo tie rod. Perfect fit and location on the Currie diff cover Here you can see how both hold the ram in the perfect location.

    GenRight

    Ram Mounting Tabs for Currie Axle

    This is a set of Ram Mounting tabs developed & made by GenRight Off Road. These are the same tabs we have used on all our builds like our Terremoto and the Growler Jeep Wranglers. One pair of tabs is made to fit the front diff cover of a Currie...

    $60.00
    Add to Cart
  • GenRight's Billet Tow Point Detailed dimensions of the shackle tab. Rosette welding from 3/4" hole on the inside. How it looks after 100% MIG welded on. We offer three different shapes.

    GenRight

    Tow Point, Hook Style (Each)

    This is a top quality D.I.Y. Hook style Tow Point from GenRight Off Road. They are Billet Machined from Cold Rolled steel plate. They are perfect for mounting 7/8" D-rings on your vehicle. These are the some tow points we use on our GenRight rear...

    $30.00
    Add to Cart
  • GenRight's Medium sized Billet Tow Point Detailed dimensions for this Tow Point Sideview of GenRight Off Road tow point (shackle tab) Shown after 100% MIG welding to a 3/16" thick mounting plate. We offer three different shapes.

    GenRight

    Tow Point, Medium (Each)

    This is a top quality D.I.Y. Medium sized Tow Point from GenRight Off Road. They are Billet Machined from Cold Rolled steel plate. They are perfect for mounting 7/8" D-rings on your vehicle. These are the some tow points we use on our GenRight rear...

    $40.00
    Add to Cart
  • Large size weld-on shackle tab (tow point) with 7/8" hole. 7/8" GenRight Billet Tow Point Dimensions for the GenRight Off Road Billet Tow Point 7/8" thick cold rolled steel. 100% MIG Welded onto a bumper inside and outside.

    GenRight

    Tow Point, Large (Each)

    This is a top quality D.I.Y. Large size Tow Point from GenRight Off Road. They are Billet Machined from Cold Rolled steel plate. They are perfect for mounting 7/8" D-rings on your vehicle. These are the some tow points we use on our GenRight front...

    $30.00
    Add to Cart
  • GenRight STK-2503 Drag Link Correction Kit GenRight's Drag Link Correction Kit installed

    GenRight

    Drag Link Correction Kit

    This is the GenRight Drag Link Correction Kit with heims rod ends. This kit will correct the angles and issues inherent in long travel front suspensions (issue being; not enough down travel on the drag link heims when both pitman arm and...

    $799.99
    Add to Cart
  • Transmission mount for 2007 to 2011 Automatic Here is a view of the Transmission mount for '07 - '11 on the front cross member.

    GenRight

    JK Transmission Mount, '07-'11

    This is a "Universal" Automatic Transmission Mount for the GenRight JK Elite Suspension System, it is designed to fit the 2007 - 2011 Jeep JK. It comes longer than needed to accept several different transmissions. It is used to hold up your...

    $149.99
    Add to Cart
  • Automatic Transmission mount for 2012 and Up on the front cross member

    GenRight

    JK Transmission Mount, '12 - '17

    This is a Automatic Transmission Mount for the GenRight JK Elite Suspension System for a 2012 to Present Jeep JK. It is used to hold up your transmission (and transfer case), independent of your vehicle's belly skid plate. We have designed this to be...

    $219.99
    Add to Cart
  • GenRight Off Road's Universal Transmission Crossmember Kit Side view of the GenRight cross member holding trans and t-case in a Jeep build. Close up of the Urethane mount & tabs on each side of this universal cross member kit. Weld the tabs to the inside of the frame so there is clearance for your exhaust. GenRight BKT-1050 in '06 LJ Rubicon with the 6 speed manual.

    GenRight

    Universal Transmission Crossmember Kit

    This is a DIY (do-it-yourself) Universal Cross Member Kit to hold up your transmission (or transfer case). We have designed this kit to be compatible with a wide variety of engine and transmission configurations used in off road Jeeps. The cross...

    $249.99
    Add to Cart
  • The GenRight Cage Harness Bar Kit includes aluminum side plates (as pictured) Pictured is all the parts included in the harness bar kit. Weld the tabs into place and attach the side plates. How it looks installed in the Jeep!

    GenRight

    Harness Bar Kit - TJ, LJ, YJ, CJ

    This is the GenRight B-pillar Harness Bar Kit for the GenRight Off Road TJ, LJ, YJ or CJ Full roll cage kits. It is designed to put the shoulder harness mounting points in the proper position for the driver and passenger (front 2 seats or...

    $299.99
    Add to Cart
  • GenRight Elite Suspension Rear upper link mount for Dynatrac ProRock 80 rear axle GenRight's rear bridge on Pro Rock 80 rear axle

    GenRight

    4 Link Rear Bridge for Dynatrac Pro Rock 80

    This is the GenRight Elite Suspension REAR Bridge (upper link mount) for a Dynatrac Pro Rock 80. The mounts were designed as part of the GenRight Elite 4 Link rear Suspension System. Requires differential housing to be machined, drilled and...

    $799.99
    $499.99
    Add to Cart
  • GenRight Elite Suspension Front upper link mount for Dynatrac XD60 front axle Fits into the JK with GenRight Elite kit like a glove!

    GenRight

    3 Link Bridge for Dynatrac Pro Rock XD60

    This is the GenRight Elite Suspension FRONT Bridge (upper link mount) for a Dynatrac Pro Rock XD 60. The mounts were designed as part of the GenRight Elite 3 Link front Suspension System. Requires differential housing to be machined, drilled and...

    $799.99
    $499.99
    Add to Cart
  • JK Elite Rear axle bracket kit for a 3.5" axle tube JK Elite Rear axle lower link, shock, and limit strap mount Assembly shown together

    GenRight

    Rear Axle Side Bracket Kit for RJ70 (3.5" tube)

    This is the GenRight REAR Axle Side Bracket Kit for a Currie Rock Jock 70 with 3.5" diameter axle tubes. The mounts were designed as part of the GenRight Elite Suspension System and need to be located and welded to the rear axle housing...

    $449.99
    Add to Cart
  • JK Elite Rear axle brackets for 3" tube (RockJock 60) Here is how all the pieces nest together. JK Elite Rear axle brackets for 3" tube (RockJock 60)

    GenRight

    Rear Axle Side Bracket Kit for RJ60 (3" tube)

    This is the GenRight REAR Axle Side Bracket Kit for a Currie Rock Jock 60 with 3" diameter axle tubes. The mounts were designed as part of the GenRight Elite Suspension System and need to be located and welded to the front axle. Features:...

    $449.99
    Add to Cart
  • JK Elite Front Axle Bracket Kit w/ HD Trac Bar mount for 3.5" diameter axle tubes Shock mount, lower link mount, and limit strap mount shown assembled

    GenRight

    Front Axle Side Bracket Kit for RJ70 (3.5" tube)

    This is the GenRight FRONT Axle Side Bracket Kit for a Currie Rock Jock 70 with 3.5" diameter axle tubes. The mounts were designed as part of the GenRight Elite Suspension System and need to be located and welded onto the front axle. Features:...

    $549.99
    Add to Cart
  • JK Elite Front Axle Bracket Kit for RockJock 60 Lower link mount, shock mount, and limit strap mount

    GenRight

    Front Axle Side Bracket Kit for RJ60 (3" tube)

    This is the GenRight FRONT Axle Side Bracket Kit for a Currie Rock Jock 60 with 3" diameter axle tubes. The mounts were designed as part of the GenRight Elite Suspension System and need to be located and welded to the front axle. Features:...

    $549.99
    Add to Cart
  • GenRight's Dana 60 Rear Axle Bridge, Un-Welded Rearview of Dana 60 Rear Axle Bridge on a 4 link set up. Dana 60 Rear Axle Bridge, with upper links. Basic dimensions so you can verify it will fit your application

    GenRight

    Rear Axle Bridge, Dana 60 Un-Welded

    If you are Triangulating (or linking) the suspension on your Jeep, you will need a "Bridge" (or Truss) above the differential housing on the rear axle to mount the upper control arms. This is GenRight's low profile Rear Axle Bridge...

    $249.99
    Add to Cart
36 of 90 Items

© 2024 GenRight Offroad All rights reserved. | Sitemap