null

MADE IN THE USA

About GenRight's Suspension Systems...

• Proven quality, performance and durability.
• Utilize the GenRight gas tank to allow more room or bigger axles.
• Are weld-on for optimal bracket location(s) and so nothing hangs down.
• Move the spring and dampening control out the wheels (in the optimal position).
• Use higher quality thicker materials for long term durability.
• Use proven quality Genuine Johnny Joints (serviceable).
• Utilize Top quality coilover shocks (King, Fox or Bilstein) with GenRight’s spec valving, spring rates and hose routing.
• Are quiet because of the bind free GenRight 3 link front and 4 link rear suspension.
• Keep the steering box for optimal performance! We have our own spec ram assist kits.

• Designed around high pinion Currie axles that are custom built to GenRight’s specs for best durability and performance off-road.

100% American Made!


Turn your TJ into an LJ!

This simple kit will give you the same up travel we offer in our Tracer coil over shock suspension kit.

All parts are key notched (puzzled) to fit together and self fixture for easy assembly by the installer.

When done, your TJ will even take a factory Jeep Unlimited LJ hard top or soft top!

The GenRight Legend Kit is our original suspension designed for the do-it-yourselfer with a CJ, YJ, TJ or LJ. Available in single or double triangulated version. It allows you to do a little bit at a time, pick your own desired wheelbase, axles (brand and width), tire size and drivetrain combo.

 
The GenRight Tracer kit is geometry that was off-road race Inspired, this “system” is designed for the highest level of performance for their Jeep on AND off road. Longer wheelbase, lower center of gravity, without sacrificing suspension travel. Specifically designed for a Chevy LS3 & 4L80 transmission (or stock drivetrain), Currie axles, & Atlas transfer case.


36 of 75 Items
  • When the TJ to LJ kit is assembled it looks like this The Genright Off Road TJ to LJ kit Tub "patch piece" that makes it look like a factory LJ This is the new rear frame tacked into place This is the factory frame to new frame fish plate reinforcement

    GenRight

    TJ to LJ Frame Kit

    This is the GenRight Off Road TJ to LJ Frame Stretch Kit. Do you have a bunch of money invested into your Jeep TJ, but wish it was an LJ for the longer wheelbase and increased cargo area? Now you can take any Jeep TJ (previously built or unbuilt)...

    $1,999.99
  • TJ to LJ Body Extension Panel with soft top lip. TJ to LJ Body Extension Panel pieces. Easily welded into place to look completely factory!

    GenRight

    TJ to LJ Body Extension Panels

    This is the formed sheet metal pieces you need to fill the 15" gap in your tub when using our TJ to LJ conversion kit. Once done, a factory LJ Hard top or Soft top will fit your TJ. Features: Two pieces for each side (4 pieces total). Same...

    $99.99
  • All new aluminum cargo area for your Jeep TJ Integrated fuel pump access panel into new cargo area floor New fender wells use the corner guard bolts to hold them in place (no extra holes to be drilled) Cargo area body mounts to the frame are maintained and support the rear floor This is how it looks after cutting out the stock cargo area floor.

    GenRight

    TJ to LJ Cargo Area Kit

    This is our TJ to LJ Cargo Area Kit for our TJ to LJ Frame Stretch Kit. Hide all the cut and stretched sheet metal with this high quality aluminum cargo area interior. It is easy to install, because it uses all the same holes that your GenRight corner...

    $1,899.99
  • GenRight's Jeep Wrangler TJ "Tracer" Suspension Kit TJ Tracer frame side control arm mounts and skid plate installed Jeff testing the TJ Tracer kit out on the trail TJ Tracer frame side control arm mounts and skid plate installed Good picture of ride height compared to Terremoto

    GenRight

    Jeep Wrangler TJ "Tracer" Suspension Kit

    This is GenRight Off Road's Tracer center section for the Jeep Wrangler TJ, 1997 - 2006. This is a scaled down version of our famous LJ Tracer suspension system which has all the proven suspension geometry from our 4500 Class off-road race Jeep...

    $1,999.99
  • Steering box brace for the Jeep Wrangler TJ Close up of the clamp for the bottom of the steering box housing Shown here on a GenRight Tracer build

    GenRight

    Steering Box Brace, Jeep TJ (Saginaw box)

      This is a steering box brace for a Jeep Wrangler TJ or LJ Unlimited (with GenRight Tracer Kit installed). This brace ties your Saginaw type power steering box to the passenger frame rail to prevent it from being torn off due to added...

    $89.40
  • High Capacity Fuel Tank for the Tracer Suspension View of the axle side of the High Capacity Fuel Tank for the Tracer Suspension Side view of the High Capacity Fuel Tank for the Tracer Suspension 100% TIG Welded 1/8" thick Aluminum Tank Here you can see the fit using a Currie 70 rear axle and the 6053 tank

    GenRight

    26 Gal Gas Tank for Tracer Susp w/7" Stretch

    This is the larger capacity fuel tank is designed to work with the GenRight Tracer Suspension System in a stretched Jeep Wrangler LJ. Fully assembled and designed to accept the factory Jeep 05-'06 fuel pump module (or the Aeromotive Phantom in-tank fuel...

    $1,949.99
  • Jeep TJ/LJ/YJ/CJ-7 Front 3-Link Kit GenRight Front 3-Link w/ Links Installed on Jeep TJ GenRight Front 3-Link w/ Links Installed on BowTie GenRight Front 3-Link Suspension Kit (Skid Plate not Included)

    GenRight

    Front 3-Link Kit (Links Optional)

     Front 3-Link Kit for Jeep TJ, LJ, YJ & More Bind-Free | Street Worthy | Trail Tested | Optimized Geometry | Customizable This is the 3 Link kit from our Legend Suspension kit. It is called 3 link, but is technically a 4 link when you include...

    $1,599.99 - $2,349.99
  • Jeep TJ/LJ/YJ/CJ-7 Rear 4-Link Rear Kit Jeep on the trail with GenRight Off Road's Jeep TJ/LJ/YJ/CJ Rear 4-Link Rear Kit w/ Links Detail view of GenRight Off Road's Jeep TJ/LJ/YJ/CJ Rear 4-Link Rear Kit w/ Links

    GenRight

    Rear 4-Link Kit (Links Optional)

    Triangulated Rear 4-Link Kit for Jeep TJ, LJ, YJ & MoreBind-Free | Street Worthy | Trail Tested | Optimized Geometry | Customizable Have you been thinking about building your own kit from scratch, or just upgrading to improve the ride quality of...

    $1,499.99 - $2,499.99
  • GenRight STK-2503 Drag Link Correction Kit GenRight's Drag Link Correction Kit installed

    GenRight

    Drag Link Correction Kit

    This is the GenRight Drag Link Correction Kit with heims rod ends. This kit will correct the angles and issues inherent in long travel front suspensions (issue being; not enough down travel on the drag link heims when both pitman arm and...

    $799.99
  • GenRight's Short Rear Shock Towers, RSM-1000 Shown here is an outboard shock tower with remote res Raise up the entire shock and move it outboard for better dampening control Another mounting solution with this rear shock tower

    GenRight

    Universal Outboard Rear Shock Tower Kit, Short

    This is a SHORTER and thinner version of our RSM-1001 outboard rear shock towers for the Jeep Wrangler TJ, Jeep LJ, Jeep YJ or CJ-7. It is designed to accept 2.0" shocks. It is a perfect way to convert your rig to outboard mounted...

    $249.99
  • GenRight's Outboard Rear Shock Mount Kit Close up of JIG welded lower shock mounts, included in this kit. TJ/LJ/YJ/CJ Universal Outboard Rear Shock Mount Kit (Shocks not included) Lower shock mount installs on the back side of the rear axle tube. Outboard Rear Shock Mount Kit Mid-Install (Bump Cans not Included)

    GenRight

    Universal Outboard Rear Shock Mount Kit

    The GenRight outboard rear shock mount kit for the Jeep TJ, LJ, YJ or CJ-7 was designed to accept 2.0" coil over shocks. It is a perfect way to convert your rig to Coilover shocks! The clean and simple design which "frenches"...

    $399.99
  • High Clearance Lower Rear Shock Mount Kit

    GenRight

    High Clearance Lower Rear Shock Mount Kit

      This is the lower rear shock mount (axle side) kit. Similar to our outboard rear shock mount kit, but this is only the lower mounts.This is perfect for someone who already has our kit but is changing axles and who does not want to cut...

    $124.99
  • GenRight Off Road's Universal Transmission Crossmember Kit Side view of the GenRight cross member holding trans and t-case in a Jeep build. Close up of the Urethane mount & tabs on each side of this universal cross member kit. Weld the tabs to the inside of the frame so there is clearance for your exhaust. GenRight BKT-1050 in '06 LJ Rubicon with the 6 speed manual.

    GenRight

    Universal Transmission Crossmember Kit

    This is a DIY (do-it-yourself) Universal Cross Member Kit to hold up your transmission (or transfer case). We have designed this kit to be compatible with a wide variety of engine and transmission configurations used in off road Jeeps. The cross...

    $249.99
  • This is how the kit comes, un-assembled This is what the kit looks like after welding GenRight Front 3 Link frame mounting brackets GenRight Front 3 Link frame mounting brackets This is how the frame side 3 link brackets lay out

    GenRight

    3 Link Front Bracket Kit, Chassis side (Unwelded)

    This is what the public has been asking for! A low cost DIY "builders kit" of our popular 3 link Front suspension brackets (not welded). We have figured out all the mounting points for proper geometry (bump steer, anti-squat, etc.) to make your rig a...

    $149.99
  • GenRight's double triangulated rear cross member for a Jeep TJ Shown here being installed on a Jeep TJ Shown here with GenRight cross member kit and ASP-390 T-case support Shown here with GenRight BKT-1050 cross member kit and ASR-390 Extra plates reinforce the inside and bottom of the Jeep frame

    GenRight

    Double Triangulated 4 Link Crossmember Kit

    This is the GenRight Off Road design DOUBLE Triangulated 4 link cross member "only" kit for a Jeep TJ or YJ.Ideal to make your rig a top notch rock crawler with awesome articulation.We have figured out all the mounting points to optimize suspension...

    $799.99
  • Rear 4-Link Rear Bracket Kit (Chassis Side) 3 Hole, Fully Welded  4 Link Rear Bracket Kit, 3 Hole installed Rear 4-Link Rear Bracket Kit (Chassis Side) 3 Hole

    GenRight

    Rear 4-Link Rear Bracket Kit (Chassis Side) 3 Hole

    This is our original 3 hole version of the "builders" Triangulated 4 link rear suspension bracket kit. We have figured out all the mounting points for proper geometry (weight transfer, rear steer and minimal anti-squat, etc.) to make your rig...

    $449.99
  • The 3 Link upper link mount can put on either side by the installer GenRight Front 3 Link frame mounting brackets GenRight Front 3 Link frame mounting brackets This is how the frame side 3 link brackets lay out Drivers side tacked into position on a Jeep TJ frame

    GenRight

    3 Link Front Bracket Kit

    This is the GenRight 3 link Front Bracket Kit for a Jeep Wrangler TJ, LJ or YJ (but can be made to fit the CJ-7 too).Front 3 Link Kit FEATURES: Single upper control arm (to the top of the axle) allows the installer more flexibility to locate...

    $349.99
  • 3 Link Front & 4 Link Rear Bracket Package

    GenRight

    3 Link Front & 4 Link Rear Bracket Package

      This is a "builders" PACKAGE with a 3 Link front and 4 Link rear suspension bracket kit(s).   This is your chance to get extra $$$ OFF our normal good deal!Designed to fit a TJ or YJ (but can modified to fit a CJ), this is...

    $799.99
  • GenRight's Axle Side 0 degree Lower Control Arm Brackets, BKT-3100 Shown here "tacked" into place in the proper rotation on the axle One piece design allows for more weld surface on the axle tube

    GenRight

    0 Deg Lower Control Arm Brackets

    These are top quality 0 Degree lower control arm mounting brackets from GenRight Off Road. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly. Unlike the old days where fabricators just welded individual tabs...

    $69.99
  • BKT-3110 lower control arm 10 degree brackets from GenRight Off Road Shown here a the rear axle tube One piece design allows for more weld surface on the axle tube

    GenRight

    10 Deg Lower Control Arm Brackets

    These are top quality 10 Degree lower control arm mounting brackets from GenRight Off Road. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly. Unlike the old days where fabricators just welded individual tabs...

    $69.99
  • GenRight's axle side 30 Degree lower control arm brackets Welded to the axle tube for this double triangulated rear set up Our one piece design allows for more weld surface on the axle tube

    GenRight

    30 Deg Lower Control Arm Brackets

    These are top quality 20 Degree lower control arm mounting brackets from GenRight Off Road. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly. Unlike the old days where fabricators just welded individual tabs...

    $69.99
  • GenRight's Axle Side 20 degree Lower Control Arm Mount One piece design allows for more weld surface to the axle tube

    GenRight

    20 Deg Lower Control Arm Brackets

    These are top quality 20 Degree lower control arm mounting brackets from GenRight Off Road. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly. Unlike the old days where fabricators just welded individual tabs...

    $69.99
  • 3" Upper Control Arm Mount (Axle Side), BKT-3240 Shown here welded to the top of a rear axle bridge (limit strap tab optional)

    GenRight

    3" Upper Control Arm Mount (Axle Side)

    This is the GenRight 3" tall Universal Control Arm Mounting Bracket. It is designed to be welded on the Axle Side and can be modified to fit any upper control arm vehicle application. The mount is universal and can be cut or trimmed to be...

    $44.99
  • 6" Upper Control Arm Mount (Axle Side) w/ Gussets, BKT-3260 6" Upper Control Arm Mount (Axle Side) Assembly

    GenRight

    6" Upper Control Arm Mount (Axle Side)

    This is the GenRight 6" tall Universal Control Arm Mounting Bracket. It is designed to be welded on the Axle Side and can be cut down to fit any vehicle application. The mount is universal and can be cut or trimmed to be mounted at any...

    $59.99
  • 8" Upper Control Arm Mount (Axle Side), BKT-3280 8" Upper Control Arm Mount (Axle Side) Assembly

    GenRight

    8" Upper Control Arm Mount (Axle Side)

    This is the GenRight 8" tall Universal Control Arm Mounting Bracket. It is designed to be welded on the Axle Side and can be cut down to fit any vehicle application.The mount is universal and can be cut or trimmed to be mounted at any height...

    $59.99
36 of 75 Items