null

MADE IN THE USA

phone: (805) 584-8635

Jeep LJ 04-'06

288 of 329 Items
  • Jeep TJ/LJ Heavy Duty Trac Bar Kit Axle Side of the TJ Trac Bar Bracket Shown here is how the backside of the bracket boxes in around the frame too. Shown here with Twisted pitman arm and mounted on the side of the TJ frame. Laser cut plates show how the mount box around the Jeep TJ frame.

    GenRight

    Jeep TJ & LJ Heavy Duty Trac Bar Kit

    This is the Heavy Duty GenRight Front Trac Bar Kit to keep the front axle under your Jeep. The materials used are twice as thick as stock! This builders kit comes with the Johnny Joint pre-welded on one side and the tubing...

    $649.99
    Add to Cart
  • Teraflex Hand Throttle Kit Contents This is the typical hand throttle installation on gear shift Hand Throttle for stick shift Jeeps Hand Throttle mounted in a Jeep Wrangler YJ Closer look at mounting for the hand throttle

    Teraflex

    Hand Throttle

    This is a Hand Throttle. It is a simple lever that is mounted to the shifter of a manual transmission. It is the single best product any 4 wheeler with a stick shift (manual) transmission can buy!1) It allows the driver to apply the throttle with...

    $47.99
    Add to Cart
  • Large 3/16" Thick Corner Gusset (Pair)

    GenRight

    Large 3/16" Thick Corner Gusset (Pair)

    This is a "large" Corner Gusset from GenRight Off Road. They are Laser cut from Heavy Duty 3/16" thick plate steel. They are perfect for welding into corners where you need more support.Designed with a "relief" in the gusset to go over a...

    $14.99
    Add to Cart
  • 1/4" Thick Extra Long Gussets (Pair) Gussets shown here on either side of the GenRight rear shock tower Gussets shown here on either side of the GenRight rear shock tower RMS-5513-P Extra Long Gussets (Pair) are 1/4" thick Shown here on the GenRight Growler YJ

    GenRight

    1/4" Thick Extra Long Gusset (Pair)

    This is an optional (but highly recommended) gusset for each side of shock tower from GenRight Off Road. This is the same gusset used on every GenRight Jeep build. They are Laser cut from Heavy Duty 1/4" thick plate steel. They are perfect for...

    $19.99
    Add to Cart
  • Griffin Heavy Duty Jeep Radiator with fan, shroud and accessories, 1987 - 2006 Side view of the Griffin Heavy Duty Jeep Radiator 1987 - 2006 Front view of the Griffin Heavy Duty Jeep Radiator 1987 - 2006

    Griffin

    Griffin Jeep TJ/LJ/YJ Radiator w/Fan

    This is the top of the line a direct fit American made Griffin Aluminum Radiator for the Jeep Wrangler TJ / LJ / YJ. This is part of Griffin's new MaxCool package where they take out all the guess work and provide you everything you need to swap...

    $1,160.00
    Add to Cart
  • Large "two hand" grab handle Large handle is ideal when mounted in the center of the dash cross bar Here you can see Dash V bar and center mounted Handle on a YJ cage

    GenRight

    Roll Cage Grab Handle (Sold Individually)

    This is a "large" cage grab handle from GenRight Off Road. This is the same handle we weld into every GenRight roll cage. Universal design, is made from 7/8" diameter tubing. These handles can be welded to any cage on any model Jeep TJ, LJ, YJ or...

    $24.99
    Add to Cart
  • 1/4" Thick Extra Large Corner Gusset (Pair)

    GenRight

    1/4" Thick Extra Large Corner Gusset (Pair)

    This is a Extra Large Corner Gusset from GenRight Off Road. It is Laser cut from Heavy Duty 1/4" thick plate steel.They are perfect for any area you want to reinforce or dress up. In a cage this type of gusset can serve as a functional way to hook...

    $19.99
    Add to Cart
  • SKP-2600 Engine Skid Builders Kit GenRight's Engine Skid kit protects the engine and transmission GenRight's Engine Skid kit installed on a Jeep Our engine skid is proven at KOJ by 4600 Class winners!

    GenRight

    Engine/Transmission Skid Plate Kit

    This is the GenRight Engine Skid Plate Kit for a Jeep. It is a universal kit, and was designed to work with our 3 Link front suspension (but might work with other kits). It is a tube frame with a 1/4" thick aluminum plate that is used to protect the...

    $599.99
    Add to Cart
  • D-Ring Shackles (Pair)

    Teraflex

    D-Ring Shackles (Pair)

    This is a large D-Ring for attaching to a front or rear bumper tow point. 3/4" bolts size.Other FEATURES Include: Super Heavy Duty forged.  Silver CAD plated to prevent rust 3/4" bolt fits most bumpers on the market Sold in Pairs (2)...

    $45.99
    Add to Cart
  • 3/16" Aluminum Skins for the Factory Jeep 1/2 doors Close up of door armor on factory Jeep 1/2 door Close up of flush mount hardware on door armor of factory Jeep 1/2 door GenRight door armor on factory Jeep half door Door armor on the GenRight Bowtie Jeep Wrangler TJ

    GenRight

    Jeep TJ & LJ Aluminum Half Door Armor

    This is the GenRight Off Road ALUMINUM Door Armor set for the Jeep hard half doors on a TJ or LJ. These are a direct bolt-on and a perfect upgrade to better protect your Jeep without adding much extra weight! This model is an ideal...

    $399.99
    Add to Cart
  • Dash V-bar for the GenRight TJ & LJ Roll Cage kits V-bar installed on the cage How it looks in the Jeep

    GenRight

    Dash "V" Bar Kit, TJ/LJ

    This is the dash V bar kit for the GenRight brand TJ or LJ roll cages.It is made from heavy .120" thick wall tubing.FEATURES: 1-1/4" diameter tubes. Tubes are laser notched for exact fit in your GenRight roll cage. These are weld-in bars...

    $99.99
    Add to Cart
  • Currie Enterprises Rock Jock 70 Rear Axle Currie Enterprises Rock Jock 70 Rear Axles in stock Currie Rock Jock 70 Rear Axle in the GenRight Terremoto JK The Currie Rock Jock 70 being put to the test on Pritchett Canyon in Moab, UT. We run the Currie Rock Jock 70 in our 800HP Unlimited Class off-road race car

    Currie Ent

    Currie 70 Full Float Jeep Rear Axle - Complete

    This is the Currie Extreme 70 complete REAR Axle. This is the same axle we run in our 800HP Ultra4 racer, 640HP Terremoto Jeep Wrangler JK and Bowtie Jeep TJ since 2014! This is a complete Full Float, 40 spline rear axle with NO mounting brackets...

    $10,599.99
    Choose Options
  • GenRight 5/8" CrMo Tie Rod Builders Kit, STK-5625 GenRight Heim style High Steering on Dana 44 knuckles

    GenRight

    Chromoly Tie Rod Kit - 5/8" Bolts

    This is the GenRight TIE ROD kit, it is a perfect upgrade for any vehicle with a Dana 30 or 44 front axles. This kit is made up of the best components available! This Heavy Duty kit will hold up to big tires and off-road abuse. Got a...

    $499.99
    Add to Cart
  • GenRight's 3/4" CrMo Tie Rod Steering, STK-5750 CrMo tie rod with 7/8" Heims on a Dynatrac front axle Here is how you make it double shear CrMo tie rod with 7/8" Heims on a Currie front axle CrMo tie rod with 7/8" Heims on a Currie Rock Jock 60 front axle

    GenRight

    Chromoly Tie Rod Kit - 3/4" Bolts

    This is the GenRight Tie Rod kit. It is a perfect upgrade for any vehicle with Dana 60 or bigger front axle. This kit is made up of the best component available! This Heavy Duty kit will hold up to big tires and off-road abuse. Got a...

    $549.99 - $579.98
    Choose Options
  • GenRight's CrMo Tie Rod and Drag Link with 7/8" Heims and 3/4" Bolts. Here you can see the GenRight CrMo Tie Rod & Drag Link with 7/8" Heims and 3/4" Bolts installed. GenRight's CrMo Tie Rod and Drag Link with 7/8" Heims and 3/4" Bolts on a Dynatrac ProRock GenRight's CrMo Tie Rod and Drag Link on a Currie RockJock 60 STK-8750 CrMo Tie Rod and Drag Link kit on a Currie Rock Jock 60 w/aluminum knuckles

    GenRight

    Chromoly Tie Rod & Drag Link Kit - 3/4" Bolts

    This is the GenRight "builders" steering (Drag Link and Tie Rod) kit. It is a perfect compliment to our Front 3 Link suspension kit and can be cut to fit any vehicle (including a Jeep JK, TJ, LJ, CJ or YJ) or axle width and...

    $999.99 - $1,029.98
    Choose Options
  • Cage to Frame Tie-in Kit Typical cage to Frame Tie-in Kit Installed

    GenRight

    Universal Jeep Cage to Frame Tie in Kit

    This is the GenRight universal frame tie-in kit to upgrade any brand cage through the floor and to the frame. This product is sold as a "builders" kit and needs to be fitted and finish welded to properly install it on your vehicle. It has been...

    $149.99
    Add to Cart
  • BMT-2001 GenRight's Hi-Clearance Body Mounts for the Jeep TJ or LJ Before - with factory body mounts on the frame After - with GenRight hi-clearance body mounts on the frame Close up of the new GenRight BMT-2001 body mounts on the frame Easy to see the difference in this picture!

    GenRight

    Body Mount LIFT Kit, TJ / LJ

    This is another innovative and long over due product from GenRight Off Road. It is a new set of hi-clearance body mounts to raise up the 3 mounts on both sides (under the rocker guard) that always get hit on trail obstacles! Yes, we designed...

    $179.99
    Add to Cart
  • Steel belly up skid plate for the Jeep Wrangler TJ or LJ Gain a massive amount of ground clearance with this skit plate Here you can see how it only drops in the middle where it has to Shown here with our double triangulated rear cross member Stock '06 Rubicon transfer case skid and transmission mount

    GenRight

    TJ Belly Up Skid Plate - Steel

    This is the STEEL GenRight Belly Up transfer case skid plate for a Jeep Wrangler TJ or LJ. Features: Replacing the factory skid plate with a lower-profile and more heavy duty skid plate. Increases your ground clearance by up to 2-3/8" inches. This...

    $599.99
    Add to Cart
  • Gain a massive amount of ground clearance with this belly up skid plate Here you can see how tucked up the skid plate is! Shown here with our double triangulated rear cross member You can see how it only drops down where it needs to

    GenRight

    TJ Belly Up Skid Plate - Aluminum

    This is the New GenRight Aluminum Belly Up transfer case skid plate for a Jeep Wrangler TJ or LJ. It increases your ground clearance by up to 2-3/8" inches by replacing the factory skid plate with a lower-profile and more heavy duty skid plate. This...

    $699.99
    Add to Cart
  • Optional C-pillar add on bar, ties the two C-pillars together Pictured here with optional tube couplers installed on each end to make it removable.

    GenRight

    Behind Seat Bar, C Pillar

    This is the GenRight behind the seat bar for any TJ, LJ, YJ or CJ GenRight cage C-Pillar. Additional tube adds strength to the rear section of the roll cage. Tony recommends on every cage.FEATURES: Cut to length (to fit GenRight FULL cage...

    $149.99
    Add to Cart
  • 1-3/4" tube X-Bar for the GenRight TJ, LJ, YJ and CJ cages. Get the extra cage strength by adding in an "X" bar to the cage. The X-bar tubes are bent back for seat clearance.

    GenRight

    Behind Seat "X" Bar Kit for TJ or LJ

    This is the GenRight Behind the seat "X" bar kit "option" for the GenRight TJ, and LJ Full roll cage kits.Kit includes 4 tubes that have been laser cut and mitered to fit the cage kit.It is made from heavy .120" thick wall 1-3/4" D.O.M...

    $299.99
    Add to Cart
  • Sale
    Rear Support for an Atlas Transfer Case Support Ring on our BKT-1050 cross member kit. Here you can see the support ring installed Holding the rear of the T-case with our double triangulated 4 link rear suspension Holding the rear of the T-case with our double triangulated 4 link rear suspension

    GenRight

    Atlas Transfer Case Support Ring Kit

    This is the GenRight Atlas transfer case rear support. We run this on all our GenRight Jeeps and Ultra4 off-road race cars. Take the stress off the rear section of your (aluminum) transmission housing by supporting the transfer case with this support...

    $199.99
    Add to Cart
  • Jeep TJ & LJ 6" Flare Front Tube Fenders - Aluminum Jeep TJ & LJ 6" Flare Front Tube Fenders - Aluminum

    GenRight

    TJ/LJ 6" Flare Front Tube Fenders - Aluminum

      This is the newest ALUMINUM version (G3) Tube Front Fender from GenRight Off Road, with a 6" flare for a Jeep Wrangler TJ or LJ. We have incorporated a removable side panel into this new fender that not only makes it look unique but helps make...

    $949.99
    Choose Options
  • TFF2710 - TJ/LJ Aluminum Front Tube Fenders with 4" Flare Rear Side View - Raw Aluminum 4" Flare Front Fenders Front - Shown with optional TJ/LJ Inner Fender Kit Front Side View - Raw Aluminum 4" Flare Front Fenders Shown with optional TJ/LJ Inner Fender Kit

    GenRight

    Jeep TJ/LJ 4" Flare Front Tube Fenders - Aluminum

      These are the newest Aluminum version (G3) Front Tube Fender Flares from GenRight Off Road, with a 4" flare for a Jeep TJ or LJ. We have incorporated a removable side panel into this new fender that not only makes it look unique but helps make...

    $899.99
    Choose Options
  • TJ/LJ 6" Flare Front Hi-Fenders - Aluminum TJ/LJ 6" Flare Front Hi-Fenders - Aluminum

    GenRight

    TJ/LJ 6" Flare Front Hi-Fenders - Aluminum

     This is the newest ALUMINUM version (G3) Tube Front Hi-Fender from GenRight Off Road, with a 6" flare for a Jeep TJ or LJ. We have incorporated a removable side panel into this new fender that not only makes it look unique but helps make...

    $999.99
    Choose Options
  • Jeep TJ/LJ 4" Flare Front Hi Fenders - Aluminum Jeep TJ/LJ 4" Flare Front Hi Fenders - Aluminum Shown Powder Coated Orange Jeep TJ/LJ 4" Flare Front Hi Fenders - Aluminum Shown Powder Coated Black

    GenRight

    Jeep TJ/LJ 4" Flare Front Hi Fenders - Aluminum

    These are the newest 4" Flare Hi-Fender Aluminum Front Tube Fender Flares for Jeep TJ & LJ from GenRight Off Road. We have incorporated a removable side panel into this new fender that not only makes it look unique but helps make installation easier...

    $899.99
    Choose Options
  • Rear body panel filler plate between corner guards Shown here installed between two 3/16" thick aluminum corner guards

    GenRight

    Aluminum Filler Plate for Rear Body Panel

    This is the GenRight Off Road 3/16" thick Aluminum filler plate for under the rear door on a Jeep TJ, LJ, YJ or CJ-7 to make the rear part of the body match the thickness of our corner guards. FEATURES: 3/16" thick Aluminum plate. Laser cut...

    $99.99
    Add to Cart
  • Sale
    5 Pin TJ / LJ Flasher Unit

    GenRight

    5 Pin TJ / LJ '01+ Flasher Unit

    This is a modified 5 pin electronic flasher unit to make the turn signals "flash" with LED lights. This flasher is specifically designed to work in all 2001 - 2006 Jeep Wrangler TJ & LJ's.Please order when using our: LED-1100,...

    $34.99
    Add to Cart
  • TFR-1000, Jeep TJ/LJ/YJ/CJ 4" Flare Rear Tube Fenders - Steel 4" GenRight Tube Flare fitted to a set of steel Corner Guards. Jeep TJ/LJ/YJ/CJ 4" Flare Rear Tube Fenders - Steel Painted Red This is the GenRight 4" rear flare with a 40" MTR tire. Basic dimensions for the GenRight 4" wide rear tube flare in steel or aluminum

    GenRight

    Jeep TJ/LJ/YJ/CJ 4" Flare Rear Tube Fenders - Steel

    This is the 4" wide Steel Rear Tube Fender Flares from GenRight Off Road. They will fit Jeep TJ, LJ, YJ, and Jeep CJ. They are built from heavy duty 1/8" thick wall steel tubing and plate to protect your Jeep in the tightest situations, and they are...

    $499.99
    Add to Cart
  • 4 Bolt Formed Tube Clamp - 2" (Pair)

    GenRight

    4 Bolt Formed Tube Clamp - 2" (Pair)

    Another Genuine Ideas from GenRight!This is a simple formed tube clamp that you can use to mount all kinds of accessories in/on your Jeep. You can drill it, tap it or weld to it to mount everything from a fire extinguisher to a roof rack...

    $59.99
    Add to Cart
  • Sale
    TJ/LJ/YJ 1" Body Lift

    GenRight

    TJ/LJ/YJ 1" Body Lift

    This is a high quality urethane type 1" Body Lift for a Jeep TJ, LJ and YJ. This is the same type body lift we use on every GenRight Jeep we build.It is an excellent and necessary upgrade for Jeeps 2003 and newer to fit any brand high clearance gas...

    $299.99
    Add to Cart
288 of 329 Items

© 2024 GenRight Offroad All rights reserved. | Sitemap