null

MADE IN THE USA

phone: (805) 584-8635

Questions? CALL US 805-584-8635

Jeep TJ 97-'06

GenRight engineers and builds world-class, rock-solid, ultra-tough off-roading components for Jeep Wranglers.  

 

We've been supporting Jeep Wrangler TJ since first opening our doors ten years ago and continue to offer the industry's most comprehensive lineup of serious off-roading accessories for TJ owners. 

 

These are not chain store parts and components.  Every GenRight product is developed to be a vast improvement over stock and well ahead of the competition.  We don't just drive Jeep Wranglers, we drive them hard, everywhere, all the time.  We also successfully race in Ultra4 and King of the Hammers, the toughest off-roading challenges since humanity landed on the moon.

 

GenRight also takes customer service very seriously. If you have a question, give us a call at (805) 584-8635, and we will be happy to assist you.

216 of 249 Items
  • Hood Louver Set, 2pc Short - Black

    GenRight

    Hood Louver Set, 2pc Short - Black

    This is the Gen-Right Off Road 2 pc "short" hood louver set for any Jeep or other vehicle with a relativly flat hood.These are intended to be mounted in the rear position on the hood and are sold as a 2 piece set.This 2pc kit is: 2 short louvers,...

    $89.99
    Add to Cart
  • GenRight's Hood Louver set Here is the typical mounting position for the 2 piece long hood louvers Typical mounting position for the 2 piece long hood louvers

    GenRight

    Hood Louver Set, 2pc Long - Black

    This is the GenRight Off Road 2 piece "long" hood louver set in black. This is a great way to vent that unwanted engine compartment heat and look good too! These louvers can be mounted in many different positions on the hood. Sold as a 2 piece set...

    $89.99
    Add to Cart
  • Hood Louver Long Front Only Hood Louver Long Front Only

    GenRight

    Hood Louver Long Front Only - Black

    This is the GenRight Off Road "long" FRONT hood louver set in BLACK powder coated finish.Works great on a Jeep TJ, LJ or YJ.This configuration offers great cooling for your engine compartment!The louver can be mounted on front portion of the...

    $59.99
    Add to Cart
  • GenRight's Hi Lift Jack Mounts Here you can see customer mounted the jack to the outside Another view of the clamps holding the jack onto the tube

    GenRight

    Hi Lift Jack Tube Mounts, 1-3/4"

      This a pair of tube clamps with a threaded 3/8" stud. Primarily used to mount a Hi-Lift jack on the tubes of our Jeep rear tire carriers, front bumper or roll cages. This a super clean way to mount accessories on any 1-3/4"...

    $109.99
    Add to Cart
  • GenRight's Hi Lift Jack mounts for any 1-1/2" dia tube The 1-1/2" dia tube clamps mount a Hi Lift jack to the GenRight tire carrier

    GenRight

    Hi Lift Jack Tube Mounts, 1-1/2"

    This a pair of tube clamps with a threaded stud. Primarily used to mount a Hi-Lift jack on one of our Jeep rear tire carriers, but can be used on any 1-1/2" diameter tube. The clamps are precision machined with two recessed...

    $99.99
    Add to Cart
  • Universal GenRight Trac Bar with Currie Johnny Joint on one end and Heim on the other Shown here mounted using the GenRight frame side bracket and a Gr8 9/16" bolt

    GenRight

    Heavy Duty Trac Bar, Only

      This is the Heavy Duty GenRight Front Trac Bar ONLY (mounting brackets sold separately).This product is still considered part of our "builders" product line, since it requires the end user to properly cut it to size and weld in the...

    $549.99
    Add to Cart
  • Jeep TJ/LJ Heavy Duty Trac Bar Kit Axle Side of the TJ Trac Bar Bracket Shown here is how the backside of the bracket boxes in around the frame too. Shown here with Twisted pitman arm and mounted on the side of the TJ frame. Laser cut plates show how the mount box around the Jeep TJ frame.

    GenRight

    Jeep TJ & LJ Heavy Duty Trac Bar Kit

    This is the Heavy Duty GenRight Front Trac Bar Kit to keep the front axle under your Jeep. The materials used are twice as thick as stock! This builders kit comes with the Johnny Joint pre-welded on one side and the tubing...

    $649.99
    Add to Cart
  • The GenRight Cage Harness Bar Kit includes aluminum side plates (as pictured) Pictured is all the parts included in the harness bar kit. Weld the tabs into place and attach the side plates. How it looks installed

    GenRight

    Harness Bar Kit - TJ, LJ, YJ, CJ

    This is the GenRight B-pillar Harness Bar Kit for the GenRight Off Road TJ, LJ, YJ or CJ Full roll cage kits. It is designed to put the shoulder harness mounting points in the proper position for the driver and passenger (front 2 seats or...

    $299.99
    Add to Cart
  • Large 3/16" Thick Corner Gusset (Pair)

    GenRight

    Large 3/16" Thick Corner Gusset (Pair)

    This is a "large" Corner Gusset from GenRight Off Road. They are Laser cut from Heavy Duty 3/16" thick plate steel. They are perfect for welding into corners where you need more support.Designed with a "relief" in the gusset to go over a...

    $14.99
    Add to Cart
  • 1/4" Thick Extra Long Gussets (Pair) Gussets shown here on either side of the GenRight rear shock tower Gussets shown here on either side of the GenRight rear shock tower RMS-5513-P Extra Long Gussets (Pair) are 1/4" thick Shown here on the GenRight Growler YJ

    GenRight

    1/4" Thick Extra Long Gusset (Pair)

    This is an optional (but highly recommended) gusset for each side of shock tower from GenRight Off Road. This is the same gusset used on every GenRight Jeep build. They are Laser cut from Heavy Duty 1/4" thick plate steel. They are perfect for...

    $19.99
    Add to Cart
  • Large "two hand" grab handle Large handle is ideal when mounted in the center of the dash cross bar Here you can see Dash V bar and center mounted Handle on a YJ cage

    GenRight

    Roll Cage Grab Handle (Sold Individually)

    This is a "large" cage grab handle from GenRight Off Road. This is the same handle we weld into every GenRight roll cage. Universal design, is made from 7/8" diameter tubing. These handles can be welded to any cage on any model Jeep TJ, LJ, YJ or...

    $24.99
    Add to Cart
  • TJ Full Roll Cage Kit Shown with optional Windshield V-Bar and C-Pillar Bar A breakdown of the components in the GenRight cage kit. GenRight cage installed with X-bar and seats TJ Full Roll Cage Kit Shown with no optional bars Here is how the laser cut tubes puzzle together

    GenRight

    Jeep TJ Laser Notched Full Roll Cage Kit

    This is the newest Laser Cut and Puzzled Cage Kit for your Jeep Wrangler TJ (1997 - 2006) from GenRight Off Road. It is the most protective, complete replacement weld-in cage available on the market. Precision Fit - Laser Cut and notched tubes are CNC...

    $2,499.99
    Choose Options
  • APR-1000 Fuel pump ring, TJ

    GenRight

    Fuel Pump Ring, 1997 - 2004 TJ / XJ

    This is the fuel pump adapter ring for any 97-04 factory type fuel pump modules on Jeep TJ or XJ. The GenRight Crawler™ Series Fuel Pump Tank rings are great for adapting your factory pump to other aftermarket tanks (metal or plastic)...

    $299.99
    Add to Cart
  • 1/4" Thick Extra Large Corner Gusset (Pair)

    GenRight

    1/4" Thick Extra Large Corner Gusset (Pair)

    This is a Extra Large Corner Gusset from GenRight Off Road. It is Laser cut from Heavy Duty 1/4" thick plate steel.They are perfect for any area you want to reinforce or dress up. In a cage this type of gusset can serve as a functional way to hook...

    $19.99
    Add to Cart
  • SKP-2600 Engine Skid Builders Kit GenRight's Engine Skid kit protects the engine and transmission GenRight's Engine Skid kit installed on a Jeep Our engine skid is proven at KOJ by 4600 Class winners!

    GenRight

    Engine/Transmission Skid Plate Kit

      This is the GenRight Engine Skid Plate Kit for a Jeep. It is a universal kit, and was designed to work with our 3 Link front suspension (but might work with other kits). It is a tube frame with a 1/4" thick aluminum plate that is used to...

    $599.99
    Add to Cart
  • GenRight STK-2503 Drag Link Correction Kit GenRight's Drag Link Correction Kit installed

    GenRight

    Drag Link Correction Kit

    This is the GenRight Drag Link Correction Kit with heims rod ends. This kit will correct the angles and issues inherent in long travel front suspensions (issue being; not enough down travel on the drag link heims when both pitman arm and...

    $799.99
    Add to Cart
  • GenRight's double triangulated rear cross member for a Jeep TJ Shown here being installed on a Jeep TJ Shown here with GenRight cross member kit and ASP-390 T-case support Shown here with GenRight BKT-1050 cross member kit and ASR-390 Extra plates reinforce the inside and bottom of the Jeep frame

    GenRight

    Double Triangulated 4 Link Crossmember Kit

    This is the GenRight Off Road design DOUBLE Triangulated 4 link cross member "only" kit for a Jeep TJ or YJ.Ideal to make your rig a top notch rock crawler with awesome articulation.We have figured out all the mounting points to optimize suspension...

    $799.99
    Add to Cart
  • 3/16" Aluminum Skins for the Factory Jeep 1/2 doors Close up of door armor on factory Jeep 1/2 door Close up of flush mount hardware on door armor of factory Jeep 1/2 door GenRight door armor on factory Jeep half door Door armor on the GenRight Bowtie Jeep Wrangler TJ

    GenRight

    Jeep TJ & LJ Aluminum Half Door Armor

    This is the GenRight Off Road ALUMINUM Door Armor set for the Jeep hard half doors on a TJ or LJ. These are a direct bolt-on and a perfect upgrade to better protect your Jeep without adding much extra weight! This model is an ideal...

    $399.99
    Add to Cart
  • Dash V-bar for the GenRight TJ & LJ Roll Cage kits V-bar installed on the cage How it looks in the Jeep

    GenRight

    Dash "V" Bar Kit, TJ/LJ

      This is the dash V bar kit for the GenRight brand TJ or LJ roll cages.It is made from heavy .120" thick wall tubing.FEATURES: 1" diameter tubes. Tubes are laser notched for exact fit in your GenRight roll cage. These are weld-in...

    $99.99
    Add to Cart
  • GenRight 5/8" CrMo Tie Rod Builders Kit, STK-5625 GenRight Heim style High Steering on Dana 44 knuckles

    GenRight

    Chromoly Tie Rod Kit - 5/8" Bolts

    This is the GenRight TIE ROD kit, it is a perfect upgrade for any vehicle with a Dana 30 or 44 front axles. This kit is made up of the best components available! This Heavy Duty kit will hold up to big tires and off-road abuse. Got a...

    $499.99
    Add to Cart
  • GenRight's 3/4" CrMo Tie Rod Steering, STK-5750 CrMo tie rod with 7/8" Heims on a Dynatrac front axle Here is how you make it double shear CrMo tie rod with 7/8" Heims on a Currie front axle CrMo tie rod with 7/8" Heims on a Currie Rock Jock 60 front axle

    GenRight

    Chromoly Tie Rod Kit - 3/4" Bolts

    This is the GenRight Tie Rod kit. It is a perfect upgrade for any vehicle with Dana 60 or bigger front axle. This kit is made up of the best component available! This Heavy Duty kit will hold up to big tires and off-road abuse. Got a...

    $549.99 - $579.98
    Choose Options
  • GenRight's CrMo Tie Rod and Drag Link with 7/8" Heims and 3/4" Bolts. Here you can see the GenRight CrMo Tie Rod & Drag Link with 7/8" Heims and 3/4" Bolts installed. GenRight's CrMo Tie Rod and Drag Link with 7/8" Heims and 3/4" Bolts on a Dynatrac ProRock GenRight's CrMo Tie Rod and Drag Link on a Currie RockJock 60 STK-8750 CrMo Tie Rod and Drag Link kit on a Currie Rock Jock 60 w/aluminum knuckles

    GenRight

    Chromoly Tie Rod & Drag Link Kit - 3/4" Bolts

      This is the GenRight "builders" steering (Drag Link and Tie Rod) kit. It is a perfect compliment to our Front 3 Link suspension kit and can be cut to fit any vehicle (including a Jeep JK, TJ, LJ, CJ or YJ) or axle...

    $999.99 - $1,029.98
    Choose Options
  • Gas tank skid plate for the Jeep Wrangler TJ or LJ

    GenRight

    Crawler™ Skid Plate - TJ/LJ

      This is the GenRight Crawler Gas tank skid plate for the Jeep TJ or Jeep LJ Unlimited. FEATURES: Heavy Duty replaces your stock skid plate to better protect the stock gas tank from being damaged New design has a dimple in center for proper...

    $499.99
    Add to Cart
  • CNR-5010 GenRight Aluminum Full Corner Guard Blanks for Jeep TJ, YJ or CJ-7 Mark the size and location of the wheel opening you want and cut with a jig saw Side view of the aluminum corner blank after cutting wheel opening Depending on stretch and tire size the wheel opening can be cut to fit

    GenRight

    TJ/YJ/CJ-7 Corner Guard Blanks - Aluminum

    This is the GenRight Off Road "Full" side coverage Corner Guard Aluminum BLANKS (pair) for the Jeep TJ, YJ or CJ. This is perfect for the guy who wants to cut all his own holes, wheel openings, etc. to have the most unique looking Jeep or match a...

    $649.99
    Choose Options
  • Corner Guard Backing Plates for any GenRight Corners Shown here on the inside of an LJ tub to reinforce the side Corner Guard Backing Plate Shown here installed

    GenRight

    Corner Guard Backing Plates

    This is the CNR-7000, Corner Guard Backing Plates (pair) by GenRight Off Road. These are used to reinforce the top AND side mounting area of the Corner Guard on your Jeep. Simply put them on the inside of the tub, in place of the fender washers. They...

    $69.99
    Add to Cart
  • GenRight's Aluminum COMP Cut Corner Guards Painted and mounted on a stretched Jeep TJ Here you can see how the corner guard panel shifts the wheel opening rearward

    GenRight

    TJ/YJ/CJ-7 Comp Cut Corner Guards - Aluminum

      This is the Aluminum "Full" COMP Cut Corner Guard set for the Jeep TJ, YJ or CJ-7 from GenRight Off Road. These are a perfect upgrade to better protect your Jeep’s tub. This model is an ideal choice when stretching your rear axle...

    $649.99
    Add to Cart
  • Cage to Frame Tie-in Kit Typical cage to Frame Tie-in Kit Installed

    GenRight

    Universal Jeep Cage to Frame Tie in Kit

    This is the GenRight universal frame tie-in kit to upgrade any brand cage through the floor and to the frame. This product is sold as a "builders" kit and needs to be fitted and finish welded to properly install it on your vehicle. It has been...

    $149.99
    Add to Cart
  • RTC-3220 Jeep Wrangler TJ Rear Bumper Plate for GR swing down tire carrier Bumper plate with D-ring style tow points Made in USA the welding is impressive!

    GenRight

    TJ/LJ Bumper Plate for Swing Down Tire Carrier

    This is the Bumper Plate for the GenRight swing down rear tire carrier. All the rear tire carrier brackets are pre-welded onto the 3/16" thick plate for the rear of a Jeep TJ & LJ. It is designed to be used as a high clearance rear bumper...

    $349.99
    Add to Cart
  • Jeep JK/TJ/LJ/YJ/CJ Rear Bump Stop Pad Kit SUP-1002 Rear Bump Stop Pad Kit (Assembled, Unwelded) Close up of the GenRight rear bump pad with 14" coil over shock Here you can see how the bump pads engage with the bump stops when flexed Another view on the bump pad mounted on rear axle

    GenRight

    Universal Rear Bump Stop Pad Kit

      This is the axle side, lower bump stop "pad" from GenRight Off Road. A simple and low cost solution for bump stops on your Jeep. Here is how it works: This kit can be installed with our Urethane Bump Stops or King/FOX Shocks 2.0" air...

    $199.99
    Add to Cart
  • SUP-1001 GenRight's front axle bump stop pad kit This is how it looks when the pieces are tacked together Shown here installed with GR Urethane bump stop Rear view of the driver side bump stop mount Side view of the driver side bump stop mount

    GenRight

    Universal Front Bump Stop Pad Kit

    This is the GenRight FRONT bump stop "pad" kit. It is a simple way to get bump stops on the front of your coil over shock Jeep! Since space is limited on the front axle, we integrated in the lower control arm mount with bump stop pad kit. Designed to...

    $249.99
    Add to Cart
  • BMT-2001 GenRight's Hi-Clearance Body Mounts for the Jeep TJ or LJ Before - with factory body mounts on the frame After - with GenRight hi-clearance body mounts on the frame Close up of the new GenRight BMT-2001 body mounts on the frame Easy to see the difference in this picture!

    GenRight

    Body Mount LIFT Kit, TJ / LJ

      This is another innovative and long over due product from GenRight Off Road. It is a new set of hi-clearance body mounts to raise up the 3 mounts on both sides (under the rocker guard) that always get hit on trail obstacles! Yes, we...

    $179.99
    Add to Cart
  • Steel belly up skid plate for the Jeep Wrangler TJ or LJ Gain a massive amount of ground clearance with this skit plate Here you can see how it only drops in the middle where it has to Shown here with our double triangulated rear cross member Stock '06 Rubicon transfer case skid and transmission mount

    GenRight

    TJ Belly Up Skid Plate - Steel

      This is the STEEL GenRight Belly Up transfer case skid plate for a Jeep Wrangler TJ or LJ. Features: Replacing the factory skid plate with a lower-profile and more heavy duty skid plate. Increases your ground clearance by up to 2-3/8" inches...

    $599.99
    Add to Cart
  • Gain a massive amount of ground clearance with this belly up skid plate Here you can see how tucked up the skid plate is! Shown here with our double triangulated rear cross member You can see how it only drops down where it needs to

    GenRight

    TJ Belly Up Skid Plate - Aluminum

    This is the New GenRight Aluminum Belly Up transfer case skid plate for a Jeep Wrangler TJ or LJ. It increases your ground clearance by up to 2-3/8" inches by replacing the factory skid plate with a lower-profile and more heavy duty skid plate. This...

    $699.99
    Add to Cart
216 of 249 Items

© 2026 GenRight Offroad All rights reserved. | Sitemap