null

MADE IN THE USA

phone: (805) 584-8635

Questions? CALL US 805-584-8635

Jeep TJ 97-'06

GenRight engineers and builds world-class, rock-solid, ultra-tough off-roading components for Jeep Wranglers.  

 

We've been supporting Jeep Wrangler TJ since first opening our doors ten years ago and continue to offer the industry's most comprehensive lineup of serious off-roading accessories for TJ owners. 

 

These are not chain store parts and components.  Every GenRight product is developed to be a vast improvement over stock and well ahead of the competition.  We don't just drive Jeep Wranglers, we drive them hard, everywhere, all the time.  We also successfully race in Ultra4 and King of the Hammers, the toughest off-roading challenges since humanity landed on the moon.

 

GenRight also takes customer service very seriously. If you have a question, give us a call at (805) 584-8635, and we will be happy to assist you.

144 of 246 Items
  • Mesh panel helps let heat out of engine compartment Hi Fenders and Hi Inner fenders, shown here on the GenRight Tuxedo LJ Jeep Wrangler TJ (or LJ) Hi-Fender Inner Fender Kit, aluminum TJ/LJ Hi-Fender Inner Fender Kit shown with GenRight hi-fenders with stock coil springs

    GenRight

    TJ/LJ Hi-Fender Inner Fender Kit

    This is the Hi-Fender Inner Fender Well Kit from GenRight Off Road, for a Jeep Wrangler TJ or LJ. Updated in 2022 with a mesh panel to vent heat from the engine compartment. By using these inner fenders, it eliminates the need to cut the stock...

    $349.99
    Add to Cart
  • TJ/LJ Standard Inner Fender Kit Shown here with standard height GenRight tube fenders and coil over shocks Shown here with standard height GenRight tube fenders and coil springs

    GenRight

    TJ/LJ Standard Inner Fender Kit

      This is the Inner Fender Well Kit from GenRight Off Road, for a Jeep TJ or LJ that eliminates the need to cut the stock fender at all! This is a REAL inner fender. It will fully enclose the area (unlike other aftermarket inner fenders)...

    $349.99
    Add to Cart
  • Aluminum Gas Cap and Filler Kit (Jeep YJ/CJ Pictured) Typical install on a stretched TJ, YJ ot CJ Still easy to access for filling, but recessed so it does not hit the tire Aluminum Gas Cap and Filler Kit (Jeep TJ/LJ '97-'02 Pictured) Kunrled cap for grip, sealed with a premium o-ring to keep dirt out

    GenRight

    Aluminum Gas Cap & Filler Kit w/ Vent

      This is the GenRight Billet Aluminum Gas Cap & Filler assembly. It's compact design solves a problem for stretched Jeeps with big tires! It is mounted above the frame inside the rear inner fender well (as pictured). The entire...

    $299.99
    Choose Options
  • 1-3/4" tube X-Bar for the GenRight TJ, LJ, YJ and CJ cages. Get the extra cage strength by adding in an "X" bar to the cage. The X-bar tubes are bent back for seat clearance.

    GenRight

    Behind Seat "X" Bar Kit for TJ or LJ

    This is the GenRight Behind the seat "X" bar kit "option" for the GenRight TJ, and LJ Full roll cage kits.Kit includes 4 tubes that have been laser cut and mitered to fit the cage kit.It is made from heavy .120" thick wall 1-3/4" D.O.M...

    $299.99
    Add to Cart
  • APR-1000 Fuel pump ring, TJ

    GenRight

    Fuel Pump Ring, 1997 - 2004 TJ / XJ

    This is the fuel pump adapter ring for any 97-04 factory type fuel pump modules on Jeep TJ or XJ. The GenRight Crawler™ Series Fuel Pump Tank rings are great for adapting your factory pump to other aftermarket tanks (metal or plastic)...

    $299.99
    Add to Cart
  • GenRight Aluminum Small Cargo Carrier Laser cut holes for tie-down attachments (not included) CNC cut badge is included Optional Tailgate Mount GenRight Aluminum Small Cargo Carrier

    GenRight

    GenRight Aluminum Small Cargo Carrier

    This is Aluminum version of the Small GenRight Cargo Carrier for your Jeep Wrangler. It allows you to divide up the cargo space in your Jeep with this simple rack/tray. Keep the heavier stuff on the bottom and the lighter stuff on top in this cargo...

    $299.99
    Choose Options
  • The GenRight Cage Harness Bar Kit includes aluminum side plates (as pictured) Pictured is all the parts included in the harness bar kit. Weld the tabs into place and attach the side plates. How it looks installed

    GenRight

    Harness Bar Kit - TJ, LJ, YJ, CJ

    This is the GenRight B-pillar Harness Bar Kit for the GenRight Off Road TJ, LJ, YJ or CJ Full roll cage kits. It is designed to put the shoulder harness mounting points in the proper position for the driver and passenger (front 2 seats or...

    $299.99
    Add to Cart
  • Genright's Rear Axle Bridge, 14 Bolt, Un-welded 14 Bolt Axle Bridge on rear axle housing. Rear Axle Bridge over the housing. Basic dimensions so you can verify it will fit your application

    GenRight

    Rear Axle Bridge / Truss, 14 Bolt, Un-welded

    If you are Triangulating (or linking) the suspension on your Jeep, you will need a "Bridge" (or Truss) above the differential housing on the rear axle to mount the upper control arms. This is GenRight's low profile Rear Axle Bridge...

    $299.99
    Add to Cart
  • 3/16" thick Aluminum cover for your tail gate. Shown here on Andrew's 2006 LJ called Paydirt. Shown here on Kelly's Silver Surfer Unlimited LJ

    GenRight

    TJ / LJ Aluminum Tailgate Cover

    This is the new Aluminum Tailgate Armor from GenRight Off Road for the Jeep 1997 - 2006 TJ or LJ. It is designed to cover your factory swing out tailgate and match the thickness of your corner guards. Sold as a "cover", it has cut outs for the factory...

    $299.99
    Add to Cart
  • Sale
    Currie Brand 1-1/4" body lift

    GenRight

    TJ/LJ/YJ 1" Body Lift

    This is a high quality urethane type 1" Body Lift for a Jeep TJ, LJ and YJ. This is the same type body lift we use on every GenRight Jeep we build.It is an excellent and necessary upgrade for Jeeps 2003 and newer to fit any brand high clearance gas...

    $299.99
    Add to Cart
  • RTC-3520, GenRight's Rear Bumper Plate for the Jeep TJ, LJ or YJ Rear bumper plate shown here with 2 extra back up lights in it. Super clean rear bumper plate is high clearance, but still has tow points

    GenRight

    TJ/LJ/YJ Rear Bumper Plate with Tow Points

      This is the GenRight Rear Bumper Plate for anyone who wants a high clearance rear bumper with the BEST possible departure angle, as it only sticks back 3/16" (the thickness of the material) behind the rear of the Jeep Wrangler TJ, LJ or YJ...

    $299.99
    Choose Options
  • Universal Urethane Bump Stop (Pair) w/ Bump Cans Same length as a compressed air bump stop, so you can upgrade down the road Shown here on the rear suspension with coil over shock Shown here on the front suspension set up for a coil over shock

    GenRight

    Universal Urethane Bump Stop (Pair) w/ Bump Cans

      This is the GenRight "Rock Stomper" Urethane bump stops. It is a simple and low cost solution for bump stops on a Jeep! Here is how it works: These Urethane Bump Stops fit in a KING 2.0" diameter air bump can. This allows you to...

    $299.99
    Choose Options
  • The GenRight Universal Multi-Function LED Tail Lights are sold as a pair Removable plate to cover the bolt holes GenRight Universal Multi-Function LED Tail Light Shown here on a 2020 Jeep JL with optional bezel GenRight Universal Multi-Function LED Tail Light box

    GenRight

    GenRight MATRIX LED Tail Light

    This is the super bright LED Tail Light from GenRight Off Road we call the "MATRIX". It was designed from the ground up, to provide you with a reliable, easy to install, and durable tail light solution. It features a rugged glass filled nylon...

    $249.99
    Add to Cart
  • GenRight's Dana 60 Rear Axle Bridge, Un-Welded Rearview of Dana 60 Rear Axle Bridge on a 4 link set up. Dana 60 Rear Axle Bridge, with upper links. Basic dimensions so you can verify it will fit your application

    GenRight

    Rear Axle Bridge/Truss, Dana 60 Un-Welded

    If you are Triangulating (or linking) the suspension on your Jeep, you will need a "Bridge" (or Truss) above the differential housing on the rear axle to mount the upper control arms. This is GenRight's low profile Rear Axle Bridge...

    $249.99
    Add to Cart
  • RBB-1000 Rear Cross Member Re-enforcement plate for a Jeep TJ, LJ or YJ Remove the 2 rear body mounts to install, then slip back in

    GenRight

    Rear Cross Member Plate, TJ/LJ/YJ

    This is the GenRight RBB-1000, a heavy duty steel rear cross member re-enforcement plate to "cap" the factory Jeep frame rear most cross member on a Jeep TJ, LJ or YJ. It is designed to beef-up your existing rear frame member AND rear most body...

    $249.99
    Choose Options
  • GenRight's TALL Tub Panel Guards TJ/LJ Tall Tub Panel Guards - Aluminum

    GenRight

    TJ/LJ Tall Tub Panel Guards - Aluminum

    Protect the side of your TJ (or LJ's) tub with a set of the GenRights "TALL" Tub Panel Guards. This Aluminum Tub Panel Guard is mounted directly to the tub body panel with special hardware provided with each set of guards. The Tub Panel Guards mount...

    $249.99
    Add to Cart
  • TJ/LJ/YJ/CJ Aluminum Tailgate - Blank

    GenRight

    TJ/LJ/YJ/CJ Aluminum Tailgate - Blank

    This is the new Aluminum Tailgate from GenRight Off Road for the Jeep TJ, LJ, YJ or CJ which is designed to replace your factory tailgate. Sold as a "blank", it allows you to customize it however you'd like. Make it a swing out or swing down! It is...

    $249.99
    Add to Cart
  • SUP-1001 GenRight's front axle bump stop pad kit This is how it looks when the pieces are tacked together Shown here installed with GR Urethane bump stop Rear view of the driver side bump stop mount Side view of the driver side bump stop mount

    GenRight

    Universal Front Bump Stop Pad Kit

    This is the GenRight FRONT bump stop "pad" kit. It is a simple way to get bump stops on the front of your coil over shock Jeep! Since space is limited on the front axle, we integrated in the lower control arm mount with bump stop pad kit. Designed to...

    $249.99
    Add to Cart
  • GenRight's Short Rear Shock Towers, RSM-1000 Shown here is an outboard shock tower with remote res Raise up the entire shock and move it outboard for better dampening control Another mounting solution with this rear shock tower

    GenRight

    Universal Outboard Rear Shock Tower Kit, Short

      This is a SHORTER and thinner version of our RSM-1001 outboard rear shock towers for the Jeep Wrangler TJ, Jeep LJ, Jeep YJ or CJ-7. It is designed to accept 2.0" shocks. It is a perfect way to convert your rig to outboard...

    $249.99
    Add to Cart
  • GenRight Off Road's Universal Transmission Crossmember Kit Side view of the GenRight cross member holding trans and t-case in a Jeep build. Close up of the Urethane mount & tabs on each side of this universal cross member kit. Weld the tabs to the inside of the frame so there is clearance for your exhaust. GenRight BKT-1050 in '06 LJ Rubicon with the 6 speed manual.

    GenRight

    Universal Transmission Crossmember Kit

      This is a DIY (do-it-yourself) Universal Cross Member Kit to hold up your transmission (or transfer case). We have designed this kit to be compatible with a wide variety of engine and transmission configurations used in off road Jeeps. The...

    $249.99
    Add to Cart
  • GenRight windshield guards for the Jeep Wrangler TJ or LJ Here you can see they are fitted nicely to the windshield frame Fitted nicely to the windshield frame and clean! They go all the way up to the rubber seal at the top

    GenRight

    Windshield Guards for the Jeep TJ/LJ

      This is the GenRight Off Road windshield guards for all models of the the Jeep Wrangler TJ or LJ (1997 - 2006).This newest version goes up higher than previously and are the best fitting windshield guards on the market!These are a nice way to...

    $249.99
    Add to Cart
  • Sale
    Rear Support for an Atlas Transfer Case Support Ring on our BKT-1050 cross member kit. Here you can see the support ring installed Holding the rear of the T-case with our double triangulated 4 link rear suspension Holding the rear of the T-case with our double triangulated 4 link rear suspension

    GenRight

    Atlas Transfer Case Support Ring Kit

    This is the GenRight Atlas transfer case rear support. We run this on all our GenRight Jeeps and Ultra4 off-road race cars. Take the stress off the rear section of your (aluminum) transmission housing by supporting the transfer case with this support...

    $199.99
    Add to Cart
  • Billet Aluminum Dash Grab Handle Billet Aluminum Dash Grab Handle Billet Aluminum Dash Grab Handle

    GenRight

    Billet Aluminum Dash Grab Handle

      This is the GenRight Off Road aluminum grab handle. Fits with the GenRight Aluminum Dash or the factory Jeep dash. FEATURES: CNC machined billet aluminum Black Anodized Includes new mounting hardware. 100% Made in USA...

    $199.99
    Add to Cart
  • TJ/LJ Whole Hood Louver - Black

    GenRight

    TJ/LJ Whole Hood Louver - Black

      This is the GenRight Off Road Whole Hood Louver for a Jeep TJ/LJ.This 1 piece design is stylish and easily distinguishable. Plus it's functional, it will help keep your engine running cooler and it's easy to install!Each...

    $199.99
    Choose Options
  • Jeep JK/TJ/LJ/YJ/CJ Rear Bump Stop Pad Kit SUP-1002 Rear Bump Stop Pad Kit (Assembled, Unwelded) Close up of the GenRight rear bump pad with 14" coil over shock Here you can see how the bump pads engage with the bump stops when flexed Another view on the bump pad mounted on rear axle

    GenRight

    Universal Rear Bump Stop Pad Kit

    This is the axle side, lower bump stop "pad" from GenRight Off Road. A simple and low cost solution for bump stops on your Jeep. Here is how it works: This kit can be installed with our Urethane Bump Stops or King/FOX Shocks 2.0" air bump,...

    $199.99
    Add to Cart
  • Jeep JK/TJ/LJ/YJ/CJ Rear Bump Stop Pad Kit for 3.5" axle tubes SUP-2002 Rear Bump Stop Pad Kit (Assembled, Unwelded) Close up of the GenRight rear bump pad with 14" coil over shock Here you can see how the bump pads engage with the bump stops when flexed Another view on the bump pad mounted on rear axle

    GenRight

    Universal Rear Bump Stop Pad Kit for 3.5" tubes

    This is the axle side, lower bump stop "pad" from GenRight Off Road. Specifically designed for the larger 3.5" axle tubes, like a 14 bolt. A simple and low cost solution for bump stops on your Jeep. Here is how it works: This kit can be installed with...

    $199.99
    Add to Cart
  • VPP1001 - GenRight Vented Power Steering Pulley The GenRight Underdrive pulley spinning and pushing air over the pump GenRight Vented Power Steering Pulley - Red GenRight Vented Power Steering Pulley - Blue

    GenRight

    Vented Power Steering Pulley

      This is not just eye candy... Big tires and tough trails will make your power steering pump work hard and get incredibly hot! Hot fluid will dramatically shorten the life of the fluid and the pump. GenRight's vented power steering pulley has...

    $199.99
    Choose Options
  • BMT-2001 GenRight's Hi-Clearance Body Mounts for the Jeep TJ or LJ Before - with factory body mounts on the frame After - with GenRight hi-clearance body mounts on the frame Close up of the new GenRight BMT-2001 body mounts on the frame Easy to see the difference in this picture!

    GenRight

    Body Mount LIFT Kit, TJ / LJ

      This is another innovative and long over due product from GenRight Off Road. It is a new set of hi-clearance body mounts to raise up the 3 mounts on both sides (under the rocker guard) that always get hit on trail obstacles! Yes, we...

    $179.99
    Add to Cart
  • BMT-2051 GenRight's Heavy Duty Body Mounts for the Jeep TJ or LJ Before - with factory body mounts on the frame

    GenRight

    Heavy Duty Body Mount Kit, TJ / LJ

    This is a Heavy Duty body mount kit from GenRight Off Road. It replaces the stock thin & cheesy body mounts that are easily smashed and deformed. These new mounts are Laser cut from Heavy Duty 3/16" thick plate steel. This model body mount...

    $179.99
    Add to Cart
  • GenRight's 5 piece hood louver set Louvers placement on the hood 5 piece hood vent kit on a Red Jeep Step 1 - tape the mounting surface Step 2 - trace the shape and measure 1/2" in all the way around

    GenRight

    Hood Louver Set, 5pc - Black

    This is the GenRight Off Road 5 piece hood louver set for a Jeep TJ/LJ or YJ in black. This configuration offers maximum cooling for your engine compartment! The louvers can be mounted in many different positions on the hood and (this part number) is...

    $179.99
    Add to Cart
  • This is a Non-electric line lock, parking brake, emergency brake We offer two different mounting styles for your application A mounting style for this line lock, parking brake B mounting style for this line lock, parking brake Technical specifications for mounting this hydraulic ball valve

    GenRight

    Ball Valve Parking Brake

      This is a simple (non-electric) hydraulic ball valve assembly that can be used as an inline parking brake. How does it work? You simply step on the brake pedal and turn the lever. It then locks the pressure in the brake line (as if you...

    $179.99 - $189.99
    Choose Options
  • GenRight Jeep TJ floor plate assembly This is where it is installed in the rear of the cargo area floor of an '05 TJ When the cover plate is installed it only sticks up 1/8" above the top of the ribs in the floor

    GenRight

    Fuel Pump Access Panel for the Jeep TJ, YJ and CJ-7

      This is the GenRight Off Road rear floor access plate/mount for the Jeep Wrangler TJ, Jeep YJ or Jeep CJ-7 (all models 1976 to 2006). It allows you access to the top of the fuel tank (pump, electrical, hoses, vents, etc) without dropping the...

    $169.99
    Add to Cart
  • TJ/LJ Whole Hood Louver TJ/LJ Whole Hood Louver Installed

    GenRight

    TJ/LJ Whole Hood Louver

      This is the GenRight Off Road Whole Hood Louver for a Jeep TJ/LJ.This 1 piece design is stylish and easily distinguishable.Plus it's functional, it will help keep your engine running cooler and it's easy to install!Each...

    $169.99
    Choose Options
  • This is how the kit comes, un-assembled This is what the kit looks like after welding GenRight Front 3 Link frame mounting brackets GenRight Front 3 Link frame mounting brackets This is how the frame side 3 link brackets lay out

    GenRight

    3 Link Front Bracket Kit, Chassis side (Unwelded)

     This is what the public has been asking for! A low cost DIY "builders kit" of our popular 3 link Front suspension brackets (not welded). We have figured out all the mounting points for proper geometry (bump steer, anti-squat, etc.) to make your...

    $149.99
    Add to Cart
144 of 246 Items

© 2025 GenRight Offroad All rights reserved. | Sitemap