­

MADE IN THE USA

phone: (805) 584-8635

Jeep JKU (4 Dr) 07-'18

EVERYTHING YOU NEED FOR YOUR JEEP JK

GenRight Off Road offers a variety of parts and accessories for your Jeep JK. All GenRight product is Made in the USA, with unrivaled standards when it comes to quality and performance. Designed and developed to provide maximum functionality and protection for your Jeep Wrangler.

Shop now

EVERYTHING YOU NEED FOR YOUR JEEP JK

GenRight Off Road offers a variety of parts and accessories for your Jeep JK. All GenRight product is Made in the USA, with unrivaled standards when it comes to quality and performance. Designed and developed to provide maximum functionality and protection for your Jeep Wrangler.

Shop now
36 of 292 Items
  • GenRight Off Road's Universal Transmission Crossmember Kit Side view of the GenRight cross member holding trans and t-case in a Jeep build. Close up of the Urethane mount & tabs on each side of this universal cross member kit. Weld the tabs to the inside of the frame so there is clearance for your exhaust. GenRight BKT-1050 in '06 LJ Rubicon with the 6 speed manual.

    GenRight

    Universal Transmission Crossmember Kit

      This is a DIY (do-it-yourself) Universal Cross Member Kit to hold up your transmission (or transfer case). We have designed this kit to be compatible with a wide variety of engine and transmission configurations used in off road Jeeps. The...

    $249.99
    Add to Cart
  • Maxbilt LED Tail Lights are surface mount, no drilling. Here you can see running and stop lights at night. Shown here on the GenRight Terremoto JK 4 stages on the LED tail lights (off, stop, running and reverse)

    Maxbilt

    Maxbilt LED Tail Lights, Surface Mount

    This is a surface mounted LED tail light from Maxbilt LED (Light Emitting Diode) tail light for a Jeep TJ, LJ, YJ or CJ-7 (and JK in our corner guards). This stealthy LED tail light is the same light we run on all our GenRight Jeeps...

    $234.99
    $220.00
    Add to Cart
  • Updated design features a rubberized "GR" logo patch Patch detail Great for the driver and passenger! Perfect for leaning out to see where the tire is! Padded arm rest even on JL half doors

    GenRight

    Padded Arm Rest for Half Doors (Pair) Black

      This is the cool Jeep accessory you have been looking for! Tired of leaning your arm on a thin or sharp edged metal half door? These padded arm rests will add a new level of comfort to your next trail ride. It simply fits into the...

    $149.99
    Add to Cart
  • Latch Pin for Tire Carrier

    GenRight

    Latch Pin for Tire Carrier

    This is a replacement "latch pin" for any GenRight Off Road "Swing Down" or "Swing Out" rear tire carrier.This is a replacement 1/2" diameter pin.Sold EACH.Self locking feature, T-handle style (as pictured). Replacement Urethane bushings are...

    $14.99
    Add to Cart
  • This is a Non-electric line lock, parking brake, emergency brake We offer two different mounting styles for your application A mounting style for this line lock, parking brake B mounting style for this line lock, parking brake Technical specifications for mounting this hydraulic ball valve

    GenRight

    Ball Valve Parking Brake

      This is a simple (non-electric) hydraulic ball valve assembly that can be used as an inline parking brake. How does it work? You simply step on the brake pedal and turn the lever. It then locks the pressure in the brake line (as if you...

    $179.99 - $189.99
    Choose Options
  • GenRight Off Road's Jeep Wrangler Swing Out Rear Tire Carrier in Aluminum GenRight Off Road's Jeep Wrangler Swing Out Rear Tire Carrier shown on a 4 Door JK 37" tire in the RTC3810 - GenRight Swing Out Rear Tire Carrier - Aluminum GenRight Off Road's Swing Out Rear Tire Carrier Shown with a 40" Goodyear MT/R and optional bag. 42" Goodyear tire and 8 lug wheel in the GenRight tire carrier

    GenRight

    Jeep JK Swing Out Rear Tire Carrier - Aluminum

      This Aluminum Swing-Out Rear Tire Carrier for the 4-Door or 2-Door Jeep Wrangler JK (2007-Current) is constructed from 6061-T6 Aluminum Alloy, and weighs in at a mere 21lbs. (20lbs. lighter than our steel version) The sleek design opens and...

    $1,699.99
    Choose Options
  • LED Dome Light with Cage Clamps and Billet Mount parts LED Dome Light mounted on a roll cage with billet cage mounts LED Dome Light with Cage Clamps and Billet Mount LED Dome light on a GenRight roll cage LED Dome light on a GenRight roll cage

    SSV Works

    Billet Dome Light with Tube Clamps

    This is a nice quality heavy duty LED dome light for roll cages. Now you can get light anywhere you need it in your Jeep with this cage mounted LED interior light! This nice bright "hyper-white" dome light has 6-LED's (3 per side) that produce 300...

    $64.99
    Choose Options
  • GenRight's Hood Louver set Here is the typical mounting position for the 2 piece long hood louvers Typical mounting position for the 2 piece long hood louvers

    GenRight

    Hood Louver Set, 2pc Long - Black

    This is the GenRight Off Road 2 piece "long" hood louver set in black. This is a great way to vent that unwanted engine compartment heat and look good too! These louvers can be mounted in many different positions on the hood. Sold as a 2 piece set...

    $89.99
    Add to Cart
  • JK (4 Door) Full Roll Cage Kit Assembled (No options shown) GR Cage can be powder coated any color to compliment your build JK (4 Door) Full Laser Cut & Puzzled Roll Cage Kit - As Sold JK (4 Door) Full Roll Cage Kit overhead view JK (4 Door) Full Roll Cage Kit (All options shown), X bar and V bars

    GenRight

    Jeep JK (4 Door) Full Roll Cage Kit V1

    This is V1 of the laser cut and puzzled Roll Cage Kit (un-welded) from GenRight Off Road for the Jeep Wrangler JKU (2007-2018). We use the latest Laser Cutting and CNC Tube Bending technology to build this cage from heavy duty 2" diameter DOM tubing and...

    $2,999.99
    Choose Options
  • Universal Removable Harness Bar w/ 2 bolt Flat Flange Option (OEM or GR) This is how you fit the GenRight harness bar to the stock roll bar. Place the harness bar tube and 2 bolt flange on stock cage and drill holes for weld-in bungs. This is how 2 bolt flange fits on tube, once cut to length. The green bar behind the front seats on the B-pillar is this bar kit. 2 bolt flat flange style.

    GenRight

    Removable Harness Bar Kit

    This is a low cost way for a do-it -yourselfer to add-on a harness bar into your Jeep's roll cage. We now offer a Universal Harness Bar Kit that will allow you to put it in for the big wheeling trips and/or remove it for everyday life around town. The...

    $119.99 - $199.99
    Choose Options
  • Genright's B-Pillar Removal Kit for Jeep JK Shown here with Upper B Pillar removed, gives it that clean Jeep look! B Pillar Kit Installed Rubber lined B Pillar to prevent chaffing Indexed hole for proper alignment

    GenRight

    Jeep JK Detachable B-Pillar Kit

      Do you want to make your Jeep look cool like the GenRight Terremoto JK? This kit of laser cut and formed parts allows you to cut off your B Pillar even with the top of your half doors for a smooth, sleek look! Yet still allow you to use of the...

    $119.99
    Add to Cart
  • GenRight's Jeep JK Rear Bumper with Tow Points - Aluminum GR Aluminum Jeep JK Rear Bumper can be used with factory 2" receiver hitch GR Alum Rear Bumper and optional Alum Tire Carrier (sold separately) Shown Powder Coated Black w/ Custom Painted GenRight Rash Guards GR RBB-8220 rear bumper is shown here after being powder coated black.

    GenRight

    Jeep JK Rear Bumper w/ Tow Points - Aluminum

      This GenRight built bumper offers "Best in Class" features including improved departure angle, added tire clearance and an incredible strength to weight ratio for the Jeep Wrangler JK. It is sleek and simple design is made of super...

    $1,399.99
    Choose Options
  • Weld In Grab Handles for GenRight Jeep Roll Cages (Pair) These handles are perfect size for getting in your Jeep. Small handles pictured here on a GenRight cage in a JK Small handles work great front or rear! Small handles allow for maximum entry room into the Jeep

    GenRight

    Weld In Grab Handles for GenRight Roll Cages (Pair)

    This is a pair of "small" cage grab handles from GenRight Off Road. This is the same handle we weld into every GenRight roll cage. Universal design, is made from 7/8" diameter tubing. These handles can be welded to any cage on any model Jeep JK, TJ,...

    $49.99
    Add to Cart
  • GenRight's billet aluminum fairlead Haus for synthetic winch lines Billet aluminum fairlead Haus for use with synthetic winch lines GenRight's billet aluminum fairlead for synthetic winch lines

    GenRight

    GR Aluminum Winch Fairlead

    This is the GenRight Aluminum Winch Fairlead to be used with synthetic winch lines, just like we use on all the GenRight Jeeps.FEATURES  Made from 3/4" thick Aluminum alloy  CNC Machined   Recessed (flush with front...

    $99.99
    Add to Cart
  • GenRight's rear cover plate and license plate mount for the center of JK tail gate Shown here in silver on the back of the GenRight Terremoto Jeep JK Shown here in black, ready to mount the rear license plate Shown here being installed over the factory vent in the rear door Shown here in a textured powder coating

    GenRight

    JK Tailgate Plate and License Plate Mount

      Clean up the way the back of your Jeep looks with this Aluminum tailgate plate for your Jeep JK from GenRight Off Road. It simply covers the factory vent and relocates the rear license plate to the center of the rear door on the Jeep JK...

    $99.99
    Choose Options
  • LED Back Up Light (Pair) We used 4 of these in the rear bumper on the GenRight Growler YJ. Here is a good view of the rear bumper plate on the GenRight Bowtie TJ.

    GenRight

    LED Back Up Light (Pair)

      This makes a great Back Up or Rock Light! These clear (or white) LED lights are nearly flush and a clean design! These lights will fit GenRight Jeep Rear Bumpers. This is also great option if you are removing you are...

    $29.99
    Add to Cart
  • GR Round LED Lights Rear view of GR LED Round Lights

    GenRight

    GenRight LED Back Up / Rock Lights

    This is the all new SUPER bright LED light from GenRight Off Road. Fits into our existing laser cut holes in most of our bumpers, or you can drill your own and attach it with the threaded nut on the back side. Can be used as Rock Lights or Back Up...

    $99.99
    Add to Cart
  • Scissor Jack mod kit shown with optional U-bolts to clamp to roll cage tube. (Jack not included) Full kit parts, mounts, velcro strap, and hardware (U-bolts optional) Scissor Jack mod kit (Jack not included) Scissor Jack mod kit, weld on or bolt on (Jack not included) Scissor Jack mod kit shown with optional U-bolts to clamp to roll cage tube (Jack not included)

    GenRight

    HD Scissor Jack Mod/Mounting Kit

    This is the GenRight Off Road manufactured Scissor Jack Kit. Why the Scissor Jack? It has a better range (compressed & extended) over a bottle jack or floor jack.  Where this matters is if you are running big tires and get a flat, as you...

    $69.99
    Choose Options
  • GenRight Aluminum Cargo Rack GenRight Aluminum Cargo Rack (ACC-10101) Laser cut holes for moveable anchor points GR LARGE Aluminum Cargo Rack (ACC-10101) GenRight Aluminum Cargo Rack (ACC-10101) with JL cage mounts

    GenRight

    GenRight Aluminum Cargo Rack

    This low profile aluminum cargo rack (tray) is a great lightweight solution from GenRight Off Road. Perfect for those camping trips where you are carrying lots of gear, or overlanding. Storage issues? Not anymore, now you can divide up the rear cargo...

    $399.99
    Choose Options
  • Sale
    RCG8104 - GenRight 4 Door Jeep JK Rocker Guards - Aluminum GenRight 4 Door Jeep JK Rocker Guards - Aluminum GenRight 4 Door Jeep JK Rocker Guards - Aluminum GenRight 4 Door Jeep JK Rocker Guards go all the way under the flares Complete side protection for the 4 Door Jeep JK

    GenRight

    Jeep JK 4 Door Rocker Guards - Aluminum

      These lightweight but durable rocker guards for your 4 door Jeep JK will protect one of the most vulnerable spots on your vehicle, and the sleek design is curved to match the body of the Jeep. Our Rocker Guards provide the highest ground...

    Was: $1,600.00
    Now: $1,399.99
    Choose Options
  • RTC3890 - Rear Tire Carrier Stop-Lock RTC3890 Open (Locked) Position RTC3890 Closed Position

    GenRight

    Stop-Lock For JK Swing Out Tire Carrier

    This is the "Stop / Lock" for the GenRight Swing Out rear tire carrier that fits the Jeep JK (2007 - Current).It allows the tire carrier to be opened all the way and locked into position automatically so the rear cargo area can be accessed...

    $149.99
    Add to Cart
  • GenRight Die Cut Vinyl Windshield Decal The same decal Tony runs on the windshield of the Terremoto JK Colors available

    GenRight

    GenRight Die Cut Vinyl Windshield Decal

      Now is your chance to represent GenRight Off Road, your favorite American Made Jeep company! This is the same windshield sticker that Tony and the rest of the GenRight crew run on their Jeeps. FEATURES: Cut from premium 3M vinyl this is a...

    $14.99
    Choose Options
  • Sale
    Jeep JK Fender Delete Kit (Front & Rear) Jeep JK Fender Delete Kit (Front Shown) Jeep JK Fender Delete Kit (Rear Shown) Jeep JK Fender Delete Kit (Front Shown) Can be painted or powder coated the color of your choice

    GenRight

    Jeep JK Fender Delete Kit (Front & Rear)

      This is the Fender Delete Kit (Front & Rear) from GenRight Off Road for the Jeep JK.These are perfect for rock crawling through the Boulders or Trees on your favorite trail.Want to go with bigger tires? They are perfect!Features: Made...

    Was: $399.99
    Now: $359.99
    Choose Options
  • Bluesea Below Deck 12V DC & USB Power Panel 12V DC & Dual 2.1A USB Chargers Built in 2A Fuse & 15A Circuit Breaker Dimensions

    Bluesea

    Bluesea Below Deck 12V DC & USB Power Panel

    This is a marine quality Universal 12V power panel for your Jeep Wrangler/Jeep Rubicon. FEATURES: The Blue Sea "Below Deck Panel" is a compact, easy to install DC charging center. The 12 Volt Cig Socket from Blue Sea Systems is designed to...

    $59.99
    Add to Cart
  • JK Low Profile Winch Guard Front Bumper - Aluminum Shown Powder Coated Red Shown Powder Coated Black Pictured - FBB8345 - Warn 9.5CTI Winch, 38" Falken Tire M/T's Shown Powder Coated Black

    GenRight

    JK Low Profile Winch Guard Front Bumper - Aluminum

      We just finished a new bumper for the Jeep Wrangler JK! This Low Profile Winch Guard version re-positions the bar to be more proportional to the recessed winch.  Not only does it look better, but will provide better protection to your winch...

    $1,300.00
    Choose Options
  • VPP1001 - GenRight Vented Power Steering Pulley The GenRight Underdrive pulley spinning and pushing air over the pump GenRight Vented Power Steering Pulley - Red GenRight Vented Power Steering Pulley - Blue

    GenRight

    Vented Power Steering Pulley

      This is not just eye candy... Big tires and tough trails will make your power steering pump work hard and get incredibly hot! Hot fluid will dramatically shorten the life of the fluid and the pump. GenRight's vented power steering pulley has...

    $199.99
    Choose Options
  • JK 0" Flare Rear Tube Fenders - Aluminum JK 0" Flare Rear Tube Fenders - Aluminum

    GenRight

    JK 0" Flare Rear Tube Fenders - Aluminum

    This is the 0" Wide ALUMINUM rear or "NO" flare option from GenRight Off Road for the Jeep JK. These close fitting tube fenders are perfect for rock crawling through the Boulders or Trees on your favorite trail. This choice is not legal...

    $199.99
    Add to Cart
  • Sale
    GenRight dash V-bar for the Jeep JK & JKU roll cages How the dash v bar looks after being installed. V-bar lines up with overhead tubes Front view shows how the dash V-bar ties into the upper tube Here you can see how all the cage "nodes" tie together for optimal strength

    GenRight

    Jeep JK Dash V-Bar Add on for V1 GenRight Cages

    This Jeep JK Dash V-Bar Add on is meant for use with the V1 GenRight Roll Cage for 2 and 4 Door Jeep JK's. The V-Bar is an important connection between the dash cross bar and the upper cage cross bar, to add additional strength and rigidity. Used in...

    Was: $99.99
    Now: $49.99
    Add to Cart
  • Billet Door Hinges for the Jeep Wrangler JK & JKU The same hinges Tony runs on his Terremoto Jeep Wrangler JKU Close up of the machine work on these billet hinges

    74Weld

    Billet Aluminum Door Hinges for Jeep Wrangler JK

    Looking for little parts you can get to trick out on your new Jeep Wrangler JK or JKU? Then these CNC Machined Billet Aluminum hinges are just the upgrade that you were looking for! The hinges simply bolt-on where the stock door hinges were. These are...

    $289.99
    Add to Cart
  • JK Whole Hood Louver - Black

    GenRight

    JK Whole Hood Louver - Black

    This is the GenRight Off Road Whole Hood Louver for a Jeep JKThis 1 piece design is stylish and easily distinguishable.Plus it's functional, it will help keep your engine running cooler and it's easy to install!Each louver is...

    $199.99
    Choose Options
36 of 292 Items

© 2025 GenRight Offroad All rights reserved. | Sitemap